Power Mech Projects Share Price Target 2027: 17.8% Upside to Rs 2,680, Bull Case Rs 3,233

Investors weighing a Power Mech Projects target price for 2027 should start with where the stock sits today. At Rs 2,276.00 on 5 November 2026, it is 24.3% below its 52-week high of Rs 3,007.50 and 32.5% above its 52-week low of Rs 1,717.70. That range spans 75% from low to high, so the entry point matters as much as the Power Mech Projects price forecast itself.

This article builds the Power Mech Projects share price target from reported numbers only: five years of annual results, the last five quarters, the latest shareholding pattern and current valuation ratios from company filings and exchange data. Each scenario states its assumptions, so you can trace how the base case, the bull case and the downside risk level were reached and test them against your own view.

Click Here – Get Free Investment Predictions

Power Mech Projects Stock Analysis: Company Overview and Key Stats

Power Mech Projects (NSE: POWERMECH) has a market capitalisation of Rs 7,111 crore. In FY26 it reported revenue of Rs 6,107 crore and net profit of Rs 411.68 crore. The table collects the figures the Power Mech Projects share price target is built on.

Metric	Value
Company	Power Mech Projects
NSE Ticker	POWERMECH
CMP (5 November 2026)	Rs 2,276.00
52-Week High	Rs 3,007.50
52-Week Low	Rs 1,717.70
Market Cap	Rs 7,111 crore
PE Ratio (TTM)	16.91
Industry PE	22.51
Price to Book	2.82
Return on Equity	14.45%
Debt to Equity	0.26
EPS (TTM)	Rs 132.99
Dividend Yield	0.07%
12-Month Base Target	Rs 2,680
Bull Case	Rs 3,233
Downside Risk Level (not a target)	Rs 1,799

Why Is Power Mech Projects Share Price Target Set at Rs 2,680 for 2027?

The arithmetic is short. Trailing EPS of Rs 132.99 grown for one year gives a forward EPS estimate of Rs 158.48, and multiplying it by the unchanged PE of 16.91 gives the Rs 2,680 base-case Power Mech Projects stock target. The bull case adds faster earnings growth and a higher multiple, while the downside risk level assumes flat earnings and a lower multiple.

Earnings Growth Behind the Power Mech Projects Target Price: Five Years of Results

Power Mech Projects grew revenue from Rs 2,728 crore in FY22 to Rs 6,107 crore in FY26, a compound annual growth rate of 22.3%. Net profit grew faster, from Rs 138.49 crore to Rs 411.68 crore (31.3% a year), which shows margin gains did part of the work and not just higher sales.

Financial Year	Revenue (Rs Cr)	Net Profit (Rs Cr)	EPS (Rs)	Dividend per Share (Rs)
FY22	2,727.80	138.49	94.48	1.50
FY23	3,618.19	207.31	141.26	2.00
FY24	4,234.40	248.39	81.07	2.00
FY25	5,279.32	347.55	103.26	1.25
FY26	6,107.25	411.68	115.12	1.50

FY26 revenue growth was 15.7%, slower than the four-year average of 22.3%, and net profit moved up 18.5%. EPS rose from Rs 81.07 in FY24 to Rs 115.12 in FY26. The FY27 outlook depends on whether that EPS estimate keeps compounding.

Margins and the Latest Quarter

Power Mech Projects converted 6.7% of FY26 revenue into net profit, against 6.6% in FY25, within a five-year range of 5.1% to 6.7%. EBITDA margin was 12.2% in FY26 versus 12.2% in FY25.

In the June 2026 quarter, revenue was Rs 1,632 crore, up 25.1% from the same quarter a year earlier, while net profit of Rs 89.33 crore was up 10.9%. EBITDA came in at Rs 176 crore, down 3.5% year on year. The next quarterly result is the first test of whether the earnings assumption holds.

Balance Sheet and Cash Flow

Debt to equity stands at 0.26, and shareholders' equity grew from Rs 1,046 crore in FY22 to Rs 2,589 crore in FY26. Operating cash flow in FY26 was Rs 387.45 crore against capital expenditure of Rs 335.46 crore, leaving free cash flow of Rs 51.99 crore, or 0.7% of the current market capitalisation. In FY25 free cash flow was negative at Rs 161.84 crore, so cash generation has not been steady year to year.

Valuation Check for the Power Mech Projects Stock Target: PE, Price to Book and ROE

At a PE of 16.91 against an industry PE of 22.51, Power Mech Projects trades at a discount to its industry. Price to book is 2.82 on a book value of Rs 796.55 per share, and return on equity is 14.45%. A PE of 16.91 equals an earnings yield of 5.9%, and the FY26 dividend of Rs 1.50 per share gives a yield of 0.07%.

Shareholding Pattern and Institutional Holding

Promoters held 58.42% of Power Mech Projects in September 2026, and promoter holding has stayed near 58.42% since September 2025. Foreign institutional investors (FII) held 6.34% and domestic institutions (DII) held 20.76%, which puts total institutional holding at 27.10%. FII holding fell from 7.00% in September 2025 to 6.34% in September 2026. Public shareholders own the remaining 14.49%. A meaningful institutional holding adds a layer of research coverage and trading depth.

Power Mech Projects Share Price Targets for the Short Term and 12 Months

Short Term Power Mech Projects Stock Target Levels: Technical Setup

At Rs 2,276.00 on 5 November 2026, Power Mech Projects trades below its 50-day simple moving average of Rs 2,372.00 and below its 200-day exponential moving average of Rs 2,440.48. The 14-day RSI reads 36.8, which is neutral territory, and the MACD line sits above its signal line. The nearest resistance level is Rs 2,372.00 (50-day simple moving average) and the nearest support is Rs 1,717.70 (52-week low). A sustained move above Rs 2,372.00 would improve the short-term setup, while a close below Rs 1,717.70 would shift attention to the next support.

12 Month Power Mech Projects Target Price for 2027

The 12-month target of Rs 2,680 means a move of 17.8% up from Rs 2,276.00 over the next 12 months. It would still leave the stock 10.9% below its 52-week high of Rs 3,007.50. Anyone checking the Power Mech Projects share price target against their own view should focus on two inputs: the EPS estimate and the PE multiple.

How EPS Growth and PE Multiple Change the Power Mech Projects Target Price

EPS Growth	PE 13.53	PE 16.91	PE 19.45
0.0% (EPS Rs 132.99)	Rs 1,799	Rs 2,249	Rs 2,587
19.2% (EPS Rs 158.48)	Rs 2,144	Rs 2,680	Rs 3,082
25.0% (EPS Rs 166.24)	Rs 2,249	Rs 2,811	Rs 3,233

Each cell multiplies the forward EPS estimate by the PE shown. Reading across a row shows what a de-rating or re-rating does to the Power Mech Projects price forecast, and reading down a column shows what earnings growth is worth at a fixed multiple.

Bull Case and Downside Risk for Power Mech Projects Stock Target in 2027

Bull Case Rs 3,233

The bull case Power Mech Projects price target needs EPS growth of 25.0%, which lifts forward EPS to Rs 166.24, and a PE multiple that rises 15% to 19.45. That gives Rs 3,233, 42.0% above the current price and above the 52-week high of Rs 3,007.50, so the stock would have to set a fresh 52-week high.

Downside Risk Level Rs 1,799

The downside risk level is not a target. It assumes EPS stays flat at Rs 132.99 and the PE falls 20% to 13.53. That gives Rs 1,799, 21.0% below the current price and above the 52-week low of Rs 1,717.70.

Scenario	EPS Growth	PE Multiple	Price (Rs)	Change vs CMP
Bull Case	25.0%	19.45	Rs 3,233	+42.0%
Base Case	19.2%	16.91	Rs 2,680	+17.8%
Downside Risk	0.0%	13.53	Rs 1,799	-21.0%

Key Risks to the Power Mech Projects Target Price for 2027

Growth Slowdown Risk for the Power Mech Projects Price Target

Revenue in the June 2026 quarter was up 25.1% year on year, and FY26 revenue growth was 15.7%. If growth slows from here, the EPS estimate behind the Power Mech Projects stock target will need revising.

Liquidity and Size Risk

Power Mech Projects has a market capitalisation of Rs 7,111 crore. Institutional holding is 27.10%, and promoters hold 58.42%. Stocks of this size can move sharply on small volumes, and exits can take longer than entries.

Valuation and Margin Risk

Net margin was 6.7% in FY26, so a small slip in costs moves profit noticeably. At a PE of 16.91 versus an industry PE of 22.51, a de-rating toward the downside-risk PE of 13.53 would cut the price even if earnings hold.

Market and Technical Risk

Technical indicators add short-term risk: the 14-day RSI is 36.8 and the MACD sits above its signal line. A broad fall in the Nifty 50 or the Sensex can override company fundamentals for weeks at a time. That applies to any Power Mech Projects stock target, however carefully it is built.

How to Invest in Power Mech Projects

Start with the live price and volume. Any Power Mech Projects share price target is only as current as the data behind it, and the data here is as of 5 November 2026, so refresh the Rs 2,276.00 price before acting on any level.

Next, review the fundamentals yourself. The Univest Screener lets you check Power Mech Projects' PE, ROE, debt and shareholding in one place.

Check Power Mech Projects fundamentals on the Univest Screener

Then compare the three Power Mech Projects target price scenarios with your own view. If you expect EPS growth below 19.2%, the base case is too optimistic for you; if you expect more, the bull case deserves weight.

Decide your position size and exit levels before you buy. The support and resistance levels above can serve as reference points, but they are not recommendations.

Finally, place the order through a SEBI-registered broker or the Univest app, and review the position after each quarterly result. Consult a SEBI-registered advisor if you are unsure.

Download the Univest iOS App or Univest Android App to track Power Mech Projects live price and get daily stock recommendations.

Conclusion

The Power Mech Projects share price target for 2027 is Rs 2,680 in the base case, with Rs 3,233 as the bull case. The support for that view is arithmetic you can check: EPS grew 19.2% a year over FY24 to FY26, and the stock trades at a PE of 16.91. The risks are equally concrete, including a net margin of just 6.7% that leaves profit sensitive to costs and a downside scenario that cuts the price 21% if earnings stall. Use these numbers as a framework, check them against the latest filings, and size any position to your own risk appetite.

FAQs on Power Mech Projects Share Price Target 2027

What is the Power Mech Projects share price target for 2027?

Ans. The base-case Power Mech Projects share price target for 2027 is Rs 2,680, which is 17.8% above the price of Rs 2,276.00 on 5 November 2026. The bull case is Rs 3,233 and the downside risk level, which is not a target, is Rs 1,799. All three come from one method: forward EPS multiplied by a PE multiple, using only reported results. They are model estimates and not guaranteed outcomes, and the next quarterly result is the first check on the EPS assumption.

What is the Power Mech Projects share price today?

Ans. As of 5 November 2026, 11:30 AM IST, Power Mech Projects (NSE: POWERMECH) trades at Rs 2,276.00, up 1.28% on the day. That is 24.3% below the 52-week high of Rs 3,007.50 and 32.5% above the 52-week low of Rs 1,717.70. The market capitalisation of Rs 7,111 crore places it among small-cap stocks. Prices change through the trading session, so check the live quote before acting on any level in this article.

Is Power Mech Projects a buy or sell at the current price?

Ans. The data points both ways. On the positive side, EPS has grown 19.2% a year over FY24 to FY26 and the base case implies 17.8% upside; on the cautious side, the net margin is a thin 6.7%, and the downside risk level of Rs 1,799 is 21% below the current price. Whether Power Mech Projects fits your portfolio depends on your time horizon, position size and risk appetite. Consult a SEBI-registered advisor before investing, as this article is not investment advice.

What are the bull case target and downside risk level for Power Mech Projects shares?

Ans. The bull case in the Power Mech Projects share price target for 2027 is Rs 3,233, which assumes 25.0% EPS growth and a PE of 19.45, a 15% re-rating from today's multiple. That is 42.0% above the current price and above the 52-week high of Rs 3,007.50, so the stock would have to set a fresh 52-week high. The downside risk level is Rs 1,799, which assumes flat EPS and a PE of 13.53, 20% lower than today. It sits 21.0% below the current price and above the 52-week low of Rs 1,717.70, and it marks a risk to watch, not a target.

What are the main risks to the Power Mech Projects price target?

Ans. Four risks matter most for the Power Mech Projects share price target: slower revenue or profit growth, a PE de-rating, thin liquidity or size risk, and weakness in the broader market. With a market capitalisation of Rs 7,111 crore, the stock can move sharply on small volumes, and exits can take longer than entries. A fall to the downside-risk PE of 13.53 would cut the price even if earnings hold.

What is the PE ratio of Power Mech Projects and how does it compare with the industry?

Ans. The PE ratio of Power Mech Projects is 16.91, against an industry PE of 22.51, which is a discount to the industry. Price to book is 2.82 and return on equity is 14.45%, and the PE equals an earnings yield of 5.9%. The base case holds the PE unchanged, so the Power Mech Projects share price target moves only with earnings, while the bull and downside scenarios change the multiple by +15% and -20%.

Who owns Power Mech Projects, and what is the promoter holding?

Ans. Promoters held 58.42% of Power Mech Projects in September 2026. FII held 6.34%, DII held 20.76% and the public held 14.49%. Together the two institutional groups hold 27.10%. Shareholding is filed every quarter, so it is worth rechecking after each result.

What were Power Mech Projects' latest quarterly results?

Ans. In the June 2026 quarter, Power Mech Projects reported revenue of Rs 1,632 crore (up 25.1% year on year) and net profit of Rs 89.33 crore (up 10.9%). For comparison, FY26 full-year revenue growth was 15.7% and net profit moved up 18.5%. Each new quarter either supports or weakens the EPS growth of 19.2% assumed in the base case.