Mold-Tek Technologies Ltd. (MOLDTECH): Mold-Tek Technologies Share Price Rises 14.03% Today

Mold-Tek Technologies Share Price moved sharply higher on 06 August 2026, with the stock trading at Rs 189, up Rs 23.25 or 14.03% over the previous close of Rs 165.75. At that level, the company’s Market Capitalisation stood at Rs 435.53 crore. In a market where investors track Top Gainers Today and Stocks in News closely, this move stands out because the stock clearly recorded a significant same-day price rise within the micro cap space.

For traders and long-term market watchers alike, Mold-Tek Technologies Share Price Today is drawing attention not only because of the size of the move, but also because the stock climbed from an opening price of Rs 167.35 to an intraday high of Rs 189.95 after touching a day low of Rs 162.15. That kind of intraday spread points to strong Price Action and a decisive move away from the previous close.

The supplied data confirms the price event but does not establish a company-specific catalyst. That matters for readers searching Mold-Tek Technologies Stock News, Why Is Mold-Tek Technologies Rising Today and Mold-Tek Technologies Share Price Rise, because the verified takeaway is straightforward: the stock has risen sharply today, volume has been active, and the move is large enough to merit closer analysis of valuation, profitability and sector positioning.

In this Univest review, the next questions are practical ones. What exactly happened in today’s trade? How meaningful was the volume participation? Do the company’s fundamentals support investor attention? And where does Mold-Tek Technologies Share Price sit relative to peers in the Engineering Consultancy segment of Capital Goods?

Mold-Tek Technologies Ltd. (MOLDTECH) Share Price Today: Price Action Analysis

Metric	Value
Current Price	Rs 189
Previous Close	Rs 165.75
Today's Change	+Rs 23.25 (+14.03%)
Day Open	Rs 167.35
Day High	Rs 189.95
Day Low	Rs 162.15
Current Volume (BSE)	37,102
BSE Traded Volume	37,102
NSE Traded Volume	9,54,499
Combined NSE + BSE Volume	9,91,601
Turnover	Rs 0.7 crore
Market Capitalisation	Rs 435.53 crore
Market Cap Category	Micro Cap

Mold-Tek Technologies Ltd. (MOLDTECH) traded at Rs 189. versus the previous close of Rs 165.75, a rise of 14.03%. The stock opened at Rs 167.35, reached Rs 189.95, touched Rs 162.15. Reported volume was 37,102.

Mold-Tek Technologies Ltd. (MOLDTECH) Fundamental Analysis

Metric	Value
Market Capitalisation	Rs 435.53 crore
P/E Ratio	47.31x
P/B Ratio	3.73x
ROE	17.83%
ROCE	25.84%
EPS	Rs 3.5
Dividend Yield	0%

Mold-Tek Technologies Ltd. was valued at a P/E ratio of 47.31x, a P/B ratio of 3.73x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of 17.83% and ROCE of 25.84%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 3.5, dividend yield of 0%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

Mold-Tek Technologies Share Price is getting market attention, but the fundamental context is more nuanced than the day’s price move alone. With a Market Cap of Rs 435.53 crore, the company sits at the upper end of the micro cap bucket in this dataset, which makes scale a relevant part of the discussion without turning it into a quality judgement by itself. The stock is trading at a P/E Ratio of 47.31 and a P/B Ratio of 3.73.

Those valuation multiples matter because profitability is not weak. The company’s ROE stands at 17.83%, while ROCE is 25.84%. In plain terms, the return on shareholder equity is healthy, and the return generated on capital employed is stronger still. That gap suggests the business has been able to convert its operating capital base into better returns than many lower-quality small companies, at least on the supplied snapshot. Investors reading Mold-Tek Technologies Fundamental Analysis would therefore note that the business is not being valued at 47.31 times earnings against poor profitability; instead, it carries respectable return ratios.

EPS is Rs 3.5, which gives a direct reference point for earnings attributable to each share. Dividend yield is 0, indicating that the stock does not currently offer a historical or current yield support in the supplied data. That means the present Mold-Tek Technologies Share Price is being judged more on earnings, return ratios and market positioning than on cash payout appeal. The dataset does not support a dividend-led investment case.

On valuation alone, the stock cannot be called cheap from the figures available, because a P/E of 47.31 is elevated against many conventional industrial names. But profitability prevents the discussion from becoming one-dimensional. A ROE of 17.83% and ROCE of 25.84% show operating efficiency that is meaningful for the Engineering Consultancy segment. For readers following Mold-Tek Technologies Earnings and Mold-Tek Technologies Financial Results themes, the key analytical balance is this: the stock has decent return metrics, yet the current valuation already reflects a substantial premium to many industry names. Univest therefore sees the present setup as one where price action has to be interpreted alongside sector benchmarks rather than in isolation.

That leads naturally to the broader industry context, where relative valuation becomes even more informative than absolute valuation.

Sector and Industry Context

Metric	Value
Sector	Capital Goods
Industry	Engineering Consultancy
Benchmark Scope	same industry
Company P/E Ratio	47.31x
Benchmark Median P/E	9.34x
Benchmark Average P/E	88.02x
Benchmark P/E Range	2.18x to 932.62x
Company P/B Ratio	3.73x
Benchmark Median P/B	1.3x
Company ROE	17.83%
Benchmark Median ROE	17.38%
Company ROCE	25.84%
Benchmark Median ROCE	16.44%
Company Market Capitalisation	Rs 435.53 crore
Benchmark Median Market Cap	Rs 42.68 crore

Mold-Tek Technologies Ltd. (MOLDTECH) is classified under sector: Capital Goods and industry: Engineering Consultancy.

Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 47.31x, which is above the benchmark median of 9.34x, a difference of +406.53%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Mold-Tek Technologies Ltd. (MOLDTECH) has a ROE of 17.83%, which is above the benchmark median of 17.38%, a difference of +2.59%. Mold-Tek Technologies Ltd. (MOLDTECH) has a ROCE of 25.84%, which is above the benchmark median of 16.44%, a difference of +57.18%.

Track today's top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

Mold-Tek Technologies Share Price is best understood against its industry benchmark, because the Engineering Consultancy segment shows a very wide spread in valuation and profitability. Within the Capital Goods sector and the same-industry benchmark, the company is being compared with 14 companies, giving a useful context for both multiple and return analysis.

The company’s P/E Ratio is 47.31. In the same benchmark set, the median P/E is 9.34, the average is 88.02, the minimum is 2.18 and the maximum is 932.62, based on 13 companies with P/E data. That tells investors two things. First, Mold-Tek Technologies Share Price is trading at a P/E far above the median industry valuation, which implies a premium versus the typical peer. Second, the industry average is heavily skewed upward by very high outliers, so the average alone would not fully describe the group. On that basis, the stock looks expensive versus the median peer, though not extreme within the full observed range.

The valuation picture is similar on book value. Mold-Tek Technologies has a P/B Ratio of 3.73, while the benchmark median is 1.3, the average is 2.02, the minimum is 0.26 and the maximum is 8.46 across 14 companies. Again, this places the company above both the median and the average, indicating that the market values its equity base at a premium relative to much of the industry.

Profitability partly explains that premium. The company’s ROE of 17.83% is slightly above the benchmark median ROE of 17.38% but below the average ROE of 19.66. Its ROCE of 25.84% is materially above the median ROCE of 16.44 and the average ROCE of 17.54. That is a stronger relative result. In other words, Mold-Tek Technologies Share Price commands an above-benchmark valuation while also delivering above-benchmark capital efficiency on ROCE.

Scale is another point in its favour. The company’s market capitalisation of Rs 435.53 crore is the highest in this 14-company industry set, ahead of the benchmark median of Rs 42.68 crore and the benchmark average of Rs 123.35 crore. For Stock Market Today readers assessing sector positioning, Univest would frame this as a company that sits at the top end of its peer group by size, trades at a premium on valuation, and shows profitability that is solid enough to justify investor scrutiny even if it does not automatically justify the multiple.

Peer Comparison

Company	Symbol	Market Cap (Cr)	P/E	P/B	ROE (%)	ROCE (%)
Monarch Surveyors and Engineering Consultants Ltd.	MSECL	321.77	8.64	1.59	12.4	17.13
Likhami Consulting Ltd.	LIKHAMI	297.5	932.62	8.46	-11.23	-11.13
HVAX Technologies Ltd.	HVAX	172.17	12.04	1.99	47.56	39.14
TELGE PROJECTS LIMITED	TELGE	166.43	26.82	3.6	20.81	13.23
Winsol Engineers Ltd.	WINSOL	132.54	9.34	2.72	20.73	11.35

Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 47.31x compared with the displayed peer median of 12.04x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 17.83% compares with a peer median of 20.73% across the companies shown in the table. ROCE stood at 25.84% versus the displayed peer median of 13.23%, providing a capital-efficiency comparison. Mold-Tek Technologies Ltd. (MOLDTECH) has a market capitalisation of Rs 435.53 crore. Among the 5 peers shown, 0 have a larger market capitalisation.

Mold-Tek Technologies Share Price also becomes easier to interpret when placed beside specific listed peers in Engineering Consultancy. Among the supplied companies, Monarch Surveyors and Engineering Consultants trades at a market cap of Rs 321.77 crore with a P/E of 8.64, P/B of 1.59, ROE of 12.4% and ROCE of 17.13%. Against that, Mold-Tek Technologies is larger at Rs 435.53 crore, carries a much higher P/E of 47.31 and P/B of 3.73, but also has better return ratios than Monarch.

HVAX Technologies has a market cap of Rs 172.17 crore, P/E of 12.04, P/B of 1.99, ROE of 47.56% and ROCE of 39.14%. Compared with HVAX, Mold-Tek Technologies Share Price reflects a much richer valuation multiple without matching that peer’s very high profitability. TELGE Projects, at Rs 166.43 crore market cap, shows a P/E of 26.82, P/B of 3.6, ROE of 20.81% and ROCE of 13.23%. Here, Mold-Tek trades at a higher P/E, a similar P/B, lower ROE and much stronger ROCE.

Winsol Engineers has a market cap of Rs 132.54 crore with a P/E of 9.34, P/B of 2.72, ROE of 20.73% and ROCE of 11.35%. DMR Hydroengineering & Infrastructures stands at Rs 30.14 crore market cap, P/E 21.54, P/B 2.25, ROE 16.94% and ROCE 21.02%. Blue Pebble has a market cap of Rs 27.74 crore, P/E 56.62, P/B 1.01, ROE 26.4% and ROCE 23.82%.

There are also more extreme outliers. Likhami Consulting carries a P/E of 932.62 and P/B of 8.46 despite ROE of -11.23% and ROCE of -11.13%, showing how distorted average industry multiples can become. Artefact Projects, by contrast, trades at a P/E of 7.43 and P/B of 0.55 with ROE of 9.2% and ROCE of 13.57%.

The comparative picture is therefore mixed but informative. Mold-Tek Technologies Share Price reflects one of the largest market caps in the group and stronger-than-median profitability, especially on ROCE, yet it is also valued above most peers on both earnings and book value. For anyone doing Mold-Tek Technologies Stock Analysis, that combination of quality and premium pricing is the central peer takeaway.

Why Investors Are Watching Mold-Tek Technologies

Mold-Tek Technologies Share Price is being watched because today’s move combines a sharp gain, a strong close-to-high trading profile and a valuation profile that already sits above many peers. That makes the stock relevant to both short-term traders looking at Momentum Stocks and longer-horizon investors comparing returns, multiples and industry positioning.

• Price action: the stock rose 14.03% to Rs 189 from Rs 165.75, after trading between Rs 162.15 and Rs 189.95.
• Volume: total traded volume reached 9,91,601 shares, with 9,54,499 on NSE and 37,102 on BSE; reported BSE turnover was Rs 0.7 crore.
• Technical context: the supplied RSI is 71.54, which indicates elevated momentum after today’s price rise.
• Fundamentals: P/E is 47.31, P/B is 3.73, ROE is 17.83%, ROCE is 25.84%, EPS is Rs 3.5 and dividend yield is 0.
• Sector position: the company has the highest market capitalisation in its same-industry 14-company benchmark set.

What investors may monitor next is whether Mold-Tek Technologies Share Price holds near current levels after such a large one-day move, and whether future market attention remains supported by relative profitability against a premium valuation. Univest would also keep the stock on watchlists because its sector comparisons are strong enough to sustain interest, even though the supplied data does not establish a specific corporate trigger for today’s rally.

About Mold-Tek Technologies

Mold-Tek Technologies Ltd. is placed in the Capital Goods sector and the Engineering Consultancy industry in the supplied dataset. That industry classification is important because it frames how Mold-Tek Technologies Share Price is being compared by the market: not as a broad industrial conglomerate, but as a specialist player within a narrower consultancy-oriented engineering basket.

The benchmark group used here contains 14 same-industry companies, including names such as Monarch Surveyors and Engineering Consultants, HVAX Technologies, TELGE Projects, Winsol Engineers, Artefact Projects and DMR Hydroengineering & Infrastructures. That places Mold-Tek Technologies within a competitive listed universe where investors often assess P/E Ratio, P/B Ratio, ROE, ROCE and Market Capitalisation side by side rather than relying on one metric alone.

Within that group, Mold-Tek Technologies currently stands out on size. Its market capitalisation of Rs 435.53 crore is the highest in the supplied benchmark set, above the average of Rs 123.35 crore and far above the median of Rs 42.68 crore. That does not say everything about business strength, but it does show that the company occupies a relatively large listed position in its industry universe.

For readers following Mold-Tek Technologies Latest News, Mold-Tek Technologies Company News and Mold-Tek Technologies NSE or Mold-Tek Technologies BSE searches, the practical takeaway is that the company sits in a specialised segment where the market tends to reward both profitability and perceived quality. Today’s move has therefore put a sharper spotlight on how Mold-Tek Technologies Share Price is being valued relative to that niche industry positioning.

Track Mold-Tek Technologies Share Price on Univest

Use Mold-Tek Technologies Ltd. (MOLDTECH) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Mold-Tek Technologies Share Price can be tracked on Univest for investors who want a single view of live price movement, market-cap updates and deeper Stock News context. Users following Mold-Tek Technologies Share Price Live can monitor intraday levels, previous close comparisons and how the stock is behaving across NSE and BSE trading sessions.

Univest also helps readers go beyond a basic Mold-Tek Technologies Share Price Update by bringing together core ratios such as P/E, P/B, ROE, ROCE, EPS and dividend yield in one research workflow. For investors comparing today’s move with longer-term context, Univest is also useful for reviewing 52-week trading behaviour, sector comparisons, peer positioning and shareholding pattern data when available. That makes it easier to track Mold-Tek Technologies Stock Performance without reducing the analysis to just one session’s gain.

Frequently Asked Questions

Why is Mold-Tek Technologies Share Price rising today?

Ans. Mold-Tek Technologies Share Price rose because the stock gained Rs 23.25 or 14.03% in today’s session, moving from the previous close of Rs 165.75 to Rs 189. The supplied data confirms the price event, but it does not establish a.

What is Mold-Tek Technologies Share Price Today?

Ans. Mold-Tek Technologies Share Price Today was Rs 189 at the time of the snapshot. That was above the previous close of Rs 165.75, after the stock opened at Rs 167.35 and touched an intraday high of Rs 189.95.

How much did Mold-Tek Technologies stock gain today?

Ans. The stock gained Rs 23.25 in absolute terms and 14.03% in percentage terms during the session. That rise placed Mold-Tek Technologies among notable top gainers in the market and made the stock relevant for event-driven price action tracking.

What were the day high and day low for Mold-Tek Technologies?

Ans. During the session, Mold-Tek Technologies traded between a day low of Rs 162.15 and a day high of Rs 189.95. The stock also opened at Rs 167.35, showing a wide intraday range before rising strongly toward the upper end.

What is the market capitalisation of Mold-Tek Technologies?

Ans. Mold-Tek Technologies had a market capitalisation of Rs 435.53 crore in the supplied data. It is classified in the Micro Cap category, yet it is also the largest company by market cap within its same-industry benchmark set.

Is Mold-Tek Technologies expensive compared with its industry?

Ans. On the supplied figures, Mold-Tek Technologies trades at a P/E of 47.31 versus the industry median of 9.34, and at a P/B of 3.73 versus the benchmark median of 1.3. That indicates a premium valuation relative to typical peers.

How profitable is Mold-Tek Technologies based on available data?

Ans. The company’s ROE is 17.83% and ROCE is 25.84% in the supplied snapshot. ROE is slightly above the industry median of 17.38, while ROCE is well above the industry median of 16.44 and average of 17.54.

What does the volume data show for Mold-Tek Technologies?

Ans. Total traded volume stood at 9,91,601 shares, with 9,54,499 shares on NSE and 37,102 shares on BSE. Reported BSE turnover was Rs 0.7 crore, indicating active participation alongside the stock’s sharp same-day price rise.

What is the EPS and dividend yield of Mold-Tek Technologies?

Ans. Mold-Tek Technologies reported EPS of Rs 3.5 in the supplied data, which reflects earnings attributable to each share. Its dividend yield was 0, so the current market view is not supported by a historical or current yield component.

How does Mold-Tek Technologies compare with selected peers?

Ans. Mold-Tek Technologies has the highest market cap in the supplied peer set at Rs 435.53 crore. Its ROCE of 25.84% is stronger than several peers, but its P/E of 47.31 remains above many companies in the same industry.