
Metal Stocks to Buy After Q2 Results 2026: What Axis Securities' Two Conviction Picks Signal and How Hindalco and Tata Steel Stack Up on Valuation, Price Zones and Risk
Axis Securities lists 2 metal picks post Q2 2026. Hindalco Rs 903.10 (-2.66%), P/E 10.6. Tata Steel Rs 180.03 (-0.81%), P/E 19.2, yield 2.20%. Nifty Metal 12,256.70, 2:38 PM, 18 Nov.
Updated: 18 Nov 2026 • 2:46 pm
Posted by:

Quick Answer
Axis Securities has named two conviction picks from the metal pack after the September quarter results, according to the 18 November report, but the names sit behind a paywall and could not be confirmed. What can be checked today is how the two largest listed names compare. Hindalco trades at Rs 903.10, down 2.66%, at about 10.6 times trailing earnings, while Tata Steel trades at Rs 180.03, down 0.81%, at about 19.1 times with a 2.20% dividend yield. Both sit 20% to 23% below their 52-week highs, so the picks are being discussed after a pullback, not at a peak.
Metal stocks to buy are back in focus after Axis Securities published two conviction picks following the Q2 results season, and the sector has pulled back enough for valuation to matter again.
This article lays out what is confirmed, what is not and how to judge any metal pick yourself. It uses exchange data at 2:38 PM on 18 November for Hindalco, Tata Steel and the Nifty Metal index, shows the price zones traders use, and lists the demand and cost drivers that decide whether a metal producer earns well. The names of Axis Securities' two picks were not available to us, so none are assumed here.
Click Here – Get Free Investment Predictions
What Axis Securities Said and What Is Still Unconfirmed
| Item | Status as of 18 November 2026 |
|---|---|
| Brokerage | Axis Securities |
| Call type | Two conviction picks from the metal sector after Q2 results |
| Names of the two picks | Not confirmed, because the full report is behind a paywall |
| Targets and stop loss | Not confirmed |
| Our approach | Compare the sector's two largest names on published data instead of guessing the picks |
A conviction pick is a stock a brokerage ranks above the rest of its coverage after a results season, usually with a target price and a time frame. The label signals a research view, not a guarantee of returns. Return on equity helps compare efficiency across metal shares in focus. Operating profit per tonne is the cleaner measure of strength for steel names within metal conviction picks.
Because the picks cannot be verified, treat any list circulating on social media with caution until the brokerage's own note or a licensed news report names them. Price to earnings is a starting point, not a verdict, when screening metal sector picks. Order books and long term contracts add visibility to earnings across steel and aluminium counters.
Live Data for Hindalco and Tata Steel at 2:38 PM
| Stock | Live price | Day change | Day range | 52-week range | Distance from 52-week high | Rise from 52-week low |
|---|---|---|---|---|---|---|
| Hindalco | Rs 903.10 | -2.66% | Rs 898.15 to Rs 916.85 | Rs 771.85 to Rs 1,176.00 | 23.2% below | 17.0% above |
| Tata Steel | Rs 180.03 | -0.81% | Rs 178.40 to Rs 181.41 | Rs 160.06 to Rs 224.40 | 19.8% below | 12.5% above |
Hindalco's day volume stood at about 62.6 lakh shares and Tata Steel's at about 1.36 crore shares on the NSE by 2:38 PM, so both prices reflect heavy participation. Support and resistance zones help with timing, though they say little about value in metal sector picks.
The Nifty Metal index, shown on its Nifty Metal page, was at 12,256.70 at the time of writing. Index context helps separate a stock-specific move from a sector-wide one. Brokerage lists differ in time frame, so check the horizon before comparing views on metal sector picks. Investors often stagger entry into steel and aluminium counters to reduce timing risk.
Valuation Check: How Low or High Are the Two Giants?
| Metric | Hindalco | Tata Steel |
|---|---|---|
| Market capitalisation | Rs 2,08,475 crore | Rs 2,26,638 crore |
| Trailing earnings per share | Rs 85.40 | Rs 9.44 |
| Price to earnings at the live price (our arithmetic) | About 10.6 | About 19.1 |
| Industry price to earnings | 10.00 | 20.61 |
| Price to book (previous close) | 1.31 | 2.22 |
| Return on equity | 14.58% | 11.18% |
| Debt to equity | 0.71 | 0.99 |
| Dividend yield | 0.53% | 2.20% |
Hindalco trades close to its industry multiple while earning a higher return on equity than Tata Steel, which suggests the market is not paying up for growth. Tata Steel trades a little below its industry multiple and pays a larger dividend. Coking coal and power make up a large share of cost, and they shape margins across metal shares in focus. Rupee moves change export realisations, which can help or hurt metal conviction picks.
Price to book and return on equity come from previous-close exchange data. The live price to earnings figures are our own arithmetic at the 2:38 PM price. Volume on a breakout matters more than the breakout itself for metal shares in focus.
Screen metal and mining stocks with the Univest Screener
Metal Stocks to Buy: A Five-Step Screen Before You Act
| Step | What to check | Why it matters |
|---|---|---|
| 1 | Price of the underlying metal, such as LME aluminium or steel spreads | Realisations decide profit more than volumes in the short run |
| 2 | Input costs, especially coking coal and power | A rise in costs can erase a rise in selling prices |
| 3 | Debt to equity and interest cover | Metal is cyclical, so heavy debt hurts most in a downturn |
| 4 | Capacity expansion plans and capital spending | Growth projects add earnings later but absorb cash first |
| 5 | Price relative to the 52-week range | A stock 20% below its high needs a reason to recover, not just a lower price |
A broker's pick is a starting point for this screen and not a replacement for it. Two stocks in the same sector can respond very differently to the same commodity move, because their cost curves and debt levels differ. A stock far below its yearly high needs a reason to recover, an idea worth applying to metal conviction picks.
Writing the five checks next to each candidate takes about ten minutes and often removes a name before any money is committed. Commodity prices set the tone for earnings, so track the metal price alongside metal conviction picks. Imports of lower-priced steel can pressure domestic prices, a recurring risk for metal shares in focus.
Price Zones Traders Watch in Hindalco and Tata Steel
| Stock | Reference support | Reference resistance | How derived |
|---|---|---|---|
| Hindalco | Rs 898 (today's low) | Rs 917 (today's high) | Intraday range on 18 November |
| Tata Steel | Rs 178.40 (today's low) | Rs 181.41 (today's high) | Intraday range on 18 November |
| Hindalco, longer view | Rs 771.85 (52-week low) | Rs 1,176.00 (52-week high) | Exchange 52-week range |
| Tata Steel, longer view | Rs 160.06 (52-week low) | Rs 224.40 (52-week high) | Exchange 52-week range |
These are plain reference levels taken from published ranges, not forecasts. A close below the day's low or above the day's high on rising volume is the kind of move short-term traders track. Capital spending plans add future capacity, though they weigh on cash in the near term for metal conviction picks. Management guidance on volumes gives a forward clue for metal shares in focus.
Investors with a longer horizon usually care less about these levels and more about earnings and debt. Aluminium and steel follow different demand cycles, which is why metal sector picks need separate checks. Global growth data, especially from China, feeds through to steel and aluminium counters within weeks.
Risks That Can Hurt Any Metal Pick
| Risk | Effect on a metal producer |
|---|---|
| Slowing global demand, especially from China | Lower realisations for aluminium and steel |
| Import pressure on steel | Weaker domestic prices and margins |
| Higher coking coal and energy costs | Squeezes spreads |
| Currency moves | A stronger rupee lowers rupee realisations on exports |
| Policy changes on duties or quotas | Can shift margins quickly in either direction |
Past strong results do not remove these risks, and a brokerage's conviction view can change when commodity prices shift. Check any target against the date it was issued. Dividend yield gives holders some income while they wait, a feature of a few among steel and aluminium counters. Aluminium producers watch the LME price and conversion costs, a pair that shapes metal sector picks.
Univest does not give buy or sell calls, and this article is general information. Size any position to your own risk limits. Results season often resets expectations, which is why attention returns to metal shares in focus. Writing down an exit level before buying keeps emotion out of decisions on metal conviction picks.
Download the Univest iOS App or Univest Android App to track Hindalco and Tata Steel and set price alerts.
Conclusion
Axis Securities has put two metal names forward after the September quarter results, but the names could not be confirmed, so the useful exercise is to judge the sector on data. Hindalco at about 10.6 times earnings and Tata Steel at about 19.1 times with a 2.20% yield both trade well below their 52-week highs. Debt levels decide how well a company absorbs a weak quarter, a core test for steel and aluminium counters. Policy changes on duties or quotas can shift margins fast, so keep an eye on news about metal sector picks.
Before acting on any pick, check the metal price trend, cost pressure, debt and the date of the brokerage note. The next catalysts are monthly price data for aluminium and steel and any management commentary after the results. A pick is only as good as the assumptions behind it, a rule that holds for steel and aluminium counters. The Nifty Metal index gives a quick read on whether metal sector picks are moving with the sector.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Frequently Asked Questions
Which metal stocks has Axis Securities picked after Q2 results?
Ans. The 18 November report says Axis Securities listed two conviction picks from the metal sector, but the names, targets and stop losses sit behind a paywall and could not be verified. Wait for the brokerage note or a licensed news report before relying on any list.
What does a conviction pick mean in stock research?
Ans. A conviction pick is a stock a brokerage ranks at the top of its coverage after a results season, usually with a target and a time frame. It reflects the analyst's view at one date, and prices or fundamentals can change after that.
How is Hindalco valued compared with Tata Steel today?
Ans. At the 2:38 PM prices, Hindalco trades at about 10.6 times trailing earnings against an industry level of 10.00, while Tata Steel trades at about 19.1 times against 20.61. Hindalco also reports a higher return on equity, at 14.58% versus 11.18%.
What drives the share prices of metal companies in India?
Ans. Selling prices of aluminium and steel, the cost of coking coal and power, global demand and import pressure matter most. Debt and capital spending decide how well a company absorbs a weak phase of the cycle.
Are metal stocks risky for new investors?
Ans. Metal is a cyclical sector, so profits and share prices can swing sharply with commodity prices. Hindalco and Tata Steel both trade 20% to 23% below their 52-week highs, which shows how far the group can move within a year.
What is the Nifty Metal index?
Ans. Nifty Metal is an NSE index that tracks large listed metal and mining companies, and it stood near 12,256.70 on 18 November. Looking at it alongside individual stocks helps show whether a move is specific to one company or shared by the sector.
How should I use a brokerage pick before investing?
Ans. Treat it as a lead. Confirm the date and target, compare valuation with the industry, check debt and the commodity trend, and decide the amount you can risk. Univest does not give buy or sell calls, and this article is general information.
Recent Articles

SPEL Semiconductor Ltd. Hits Upper Circuit on BSE, 18 November 2026
18 November 2026

Melstar Information Technologies Ltd. Hits Lower Circuit on BSE, 18 November 2026
18 November 2026

Simmonds Marshall Ltd. Hits Upper Circuit on BSE, 18 November 2026
18 November 2026

KEI Industries Ltd. (KEI) Industries Share Price: Near 52-Week Low Keeps KEI in Focus
18 November 2026
Note: This blog is for information purpose only. Investments and trading are subject to market risks, read all scheme related documents carefully.
Reviews
Recent Posts
SPEL Semiconductor Ltd. Hits Upper Circuit on BSE, 18 November 2026
Melstar Information Technologies Ltd. Hits Lower Circuit on BSE, 18 November 2026
Simmonds Marshall Ltd. Hits Upper Circuit on BSE, 18 November 2026
KEI Industries Ltd. (KEI) Industries Share Price: Near 52-Week Low Keeps KEI in Focus
State Bank Of India (SBIN) Share Price rises 2.39% as SBIN trades at Rs 1,135.50

Uniresearch Global Pvt Ltd
Research Analyst
SEBI Registration Number — INH000013776
Uniresearch is a subsidiary of Univest Communication Technologies Private Limited
Company Address: Registered Address: Ground Floor, Unitech Commercial Tower 2, Block B, Greenwood City, Unit 1-3, Sector 45, Gurugram, Haryana 122003
Write to us : support@univest.in, compliance@univest.in
Verify on SEBI registry →RESEARCH ANALYST
Get SEBI Registered
advice on the stocks
trending today.
Get 3 FREE Trade Ideas
for Startups Accelerator 2024
Trusted by 1Cr Indians
Awarded No.1 by Economic Times





