Thaai Casting (TCL) Share Price Falls 11.46% to Rs 100.10

Thaai Casting Share Price fell to Rs 100.10 on 08 September 2026, down 11.46% for the day, taking the company’s market capitalisation to Rs 299.4 crore. The Micro Cap stock opened at Rs 113.05, which was also the day’s high, and later slipped to an intraday low of Rs 98 before trimming part of the decline. That sharp move has put Thaai Casting Stock News on the radar in today’s market update.

The supplied data confirms the price event, but it does not establish a company-specific catalyst behind today’s decline. Even so, Thaai Casting Share Price Today is attracting attention because the fall was steep, the opening level matched the previous close of Rs 113.05, and the session ended far below that mark. For investors tracking Thaai Casting Share Price, the immediate focus shifts to three things: whether price action stabilises after the drop, how the company’s valuation compares with castings peers, and whether its profitability metrics justify continued attention. Univest notes that the stock still sits within a defined industry context rather than in isolation.

Thaai Casting (TCL) Share Price Today: Price Action Analysis

Metric	Value
Current Price	Rs 100.1
Previous Close	Rs 113.05
Today's Move	-Rs 12.95 (-11.46%)
Open	Rs 113.05
High	Rs 113.05
Low	Rs 98
Turnover	Rs 1.05 crore
Market Capitalisation	Rs 299.4 crore
Market Cap Category	Micro Cap

Thaai Casting Share Price Today reflected a decisive intraday re-rating, with the stock moving from a flat open at Rs 113.05 to a low of Rs 98 before recovering modestly to Rs 100.10. The previous close was Rs 113.05, so the absolute day change stood at Rs -12.95, equivalent to a decline of 11.46%. Turnover for the session was Rs 1.05 crore, indicating that the stock drew measurable market attention during the move.

A notable detail in this Thaai Casting Share Price Update is that the stock never traded above its opening level, as the day high remained Rs 113.05. That usually signals that sellers dominated after the opening print, while the bounce from Rs 98 to Rs 100.10 suggests some intraday support emerged near the lows. As a Micro Cap company, Thaai Casting can see sharper single-session price swings than larger peers, which makes today’s decline especially relevant for short-term price action analysis. For readers following Thaai Casting Share News on Univest, the next step is to judge whether the price move aligns with the company’s broader valuation and profitability profile.

Thaai Casting (TCL) Fundamental Analysis

Metric	Value
Market Capitalisation	Rs 299.4 crore
P/E Ratio	21.58x
P/B Ratio	3.26x
ROE	15.56%
ROCE	15.9%
EPS	Rs 5.24
Book Value Per Share	Rs 34.72
Dividend Yield	0%

Thaai Casting Fundamental Analysis shows a business with mid-range profitability metrics for its industry, even after today’s share price decline. At a market cap of Rs 299.4 crore, Thaai Casting remains a Micro Cap company, which gives size context but not a quality verdict. The stock is trading at a P/E ratio of 21.58 and a P/B ratio of 3.26. EPS stands at 5.24, which represents earnings attributable to each share, while book value per share is Rs 34.72, showing the accounting net worth backing each share.

On returns, ROE is 15.56% and ROCE is 15.9%. Those figures indicate the company is generating moderate returns on shareholder equity and capital employed, though not at the top end of the peer set discussed later. Dividend yield is 0, so the current investment case in the supplied data rests on earnings, valuation and operating efficiency rather than cash payout. In simple terms, Thaai Casting Share Price has corrected sharply today, but its core ratios do not point to an obviously stretched valuation relative to its immediate industry benchmark. That makes sector context and peer comparison especially important for interpreting Thaai Casting Stock Analysis on Univest.

Sector and Industry Context

Metric	Value
Sector	Automobile & Ancillaries
Industry	Castings/Forgings
Benchmark Scope	same industry
Company P/E Ratio	21.58x
Benchmark Median P/E	24.67x
Benchmark Average P/E	44.52x
Benchmark P/E Range	3.31x to 284.09x
Company P/B Ratio	3.26x
Benchmark Median P/B	2.67x
Benchmark Average P/B	4.72x
Company ROE	15.56%
Benchmark Median ROE	15.56%
Benchmark Average ROE	19.03%
Company ROCE	15.9%
Benchmark Median ROCE	17.47%
Benchmark Average ROCE	21.59%
Company Market Capitalisation	Rs 299.4 crore
Benchmark Median Market Cap	Rs 299.4 crore
Benchmark Average Market Cap	Rs 3,291.38 crore

Thaai Casting operates in Automobile & Ancillaries within the Castings/Forgings industry, and the supplied same-industry benchmark covers 27 companies. This matters because Thaai Casting Share Price cannot be judged only on today’s fall; it also needs to be assessed against industry valuation and profitability levels. On that basis, the stock’s P/E of 21.58 is below the benchmark median of 24.67 and well below the benchmark average of 44.52, within an industry range of 3.31 to 284.09 based on 25 companies.

The P/B ratio of 3.26 is above the industry median of 2.67 but below the average of 4.72, with the broader range spanning 0.69 to 23.23 across 27 companies. Profitability is more mixed. Thaai Casting’s ROE of 15.56% exactly matches the benchmark median of 15.56% but trails the average of 19.03. Its ROCE of 15.9% is below both the median of 17.47 and the average of 21.59. Market-cap context is also telling: Thaai Casting’s Rs 299.4 crore market cap exactly matches the industry median, while the average is much higher at Rs 3,291.38 crore because the group includes much larger companies. For readers tracking Thaai Casting Market Cap and valuation on Univest, the stock sits near the middle of the size distribution but below the stronger end of industry profitability.

Peer Comparison

Company	Symbol	Market Cap (Cr)	P/E	P/B	ROE (%)	ROCE (%)
AIA Engineering	AIAENG	39,504.38	31.12	4.74	16.97	21.16
PTC Industries	PTCIL	35,726.19	284.09	23.23	6.03	7.66
Steelcast	STEELCAS	3,295.58	36.34	7.87	24.1	32.41
Investment & Precision Castings	INVPRECQ	1,275	89.21	12.09	12.13	14.14
Alicon Castalloy	ALICON	1,117.24	30.5	1.74	8.18	11.84

Against key listed peers, Thaai Casting presents a mixed valuation-versus-returns picture. Its P/E of 21.58 is lower than AIA Engineering at 31.12, Steelcast at 36.34, Investment & Precision Castings at 89.21 and Alicon Castalloy at 30.5, while sitting far below PTC Industries at 284.09. That makes Thaai Casting relatively lower valued on earnings than each of the five named peers in the supplied comparison set.

However, Thaai Casting’s profitability does not lead this group. Its ROE of 15.56% is below AIA Engineering’s 16.97% and Steelcast’s 24.1%, though above Investment & Precision Castings at 12.13%, Alicon Castalloy at 8.18% and PTC Industries at 6.03%. The same pattern appears in ROCE: Thaai Casting at 15.9% trails AIA Engineering’s 21.16% and Steelcast’s 32.41%, but exceeds Investment & Precision Castings at 14.14%, Alicon Castalloy at 11.84% and PTC Industries at 7.66%. Size is the clearest gap. Thaai Casting’s market cap of Rs 299.4 crore is far smaller than all five peers, from Alicon’s Rs 1,117.24 crore to AIA Engineering’s Rs 39,504.38 crore. Univest therefore sees Thaai Casting Share Price as cheaper than these peers on P/E, but not stronger across profitability metrics.

Why Investors Are Watching Thaai Casting

• Thaai Casting Share Price fell 11.46% in a single session, from Rs 113.05 to Rs 100.10.
• The stock opened at the day’s high and later touched Rs 98, highlighting weak intraday price action.
• Its P/E of 21.58 sits below the same-industry median of 24.67 and average of 44.52.
• ROE of 15.56% matches the industry median, while ROCE of 15.9% is below industry median and average levels.
• The company’s Rs 299.4 crore market cap exactly matches the industry median in the 27-company benchmark set.

About Thaai Casting

Thaai Casting is part of the Automobile & Ancillaries sector and operates within the Castings/Forgings industry. Based on the supplied company context, the market identifies it as a castings-focused business within a manufacturing segment that serves industrial and automotive-linked demand chains. For investors reading Thaai Casting Latest News and Thaai Casting Company News, the key takeaway is that the stock belongs to a sector where valuation and return ratios vary widely, from low-single-digit P/E names to premium-rated peers with much larger market capitalisation. That industry positioning is central to interpreting Thaai Casting Share Price News after a sharp one-day decline.

Track Thaai Casting Share Price on Univest

UseThaai Casting (TCL) live share-price page,Univest top decliners screener,Univest market blogsto review live stock data, top decliners and related market analysis.

On Univest, users can track Thaai Casting Share Price Live alongside daily price action, fundamental ratios, market capitalisation, peer comparison and broader market insights. The platform also helps investors follow 52-week levels, sector context and ongoing stock updates in one place. For anyone monitoring Thaai Casting Share Price Today after this decline, Univest offers a structured way to compare price moves with valuation and profitability data rather than viewing the session in isolation.

Frequently Asked Questions

Why is Thaai Casting Share Price falling today?

Ans. Thaai Casting Share Price fell 11.46% to Rs 100.10 on 08 September 2026. The supplied data confirms the price decline and intraday weakness, but it does not establish any company-specific catalyst behind today’s move.

What is the latest Thaai Casting Share Price Today?

Ans. Thaai Casting Share Price Today stood at Rs 100.10 at the time of the supplied update. The stock was down Rs 12.95 from the previous close of Rs 113.05, marking an 11.46% single-session decline.

How did Thaai Casting perform intraday?

Ans. The stock opened at Rs 113.05, which was also the day’s high, then declined to an intraday low of Rs 98 before closing the reported update at Rs 100.10. That pattern reflects sustained weakness after the open.

What does today’s turnover indicate for Thaai Casting?

Ans. Thaai Casting recorded turnover of Rs 1.05 crore during the session. In the context of an 11.46% decline and a move from Rs 113.05 to Rs 100.10, that shows the stock drew noticeable trading interest.

Is Thaai Casting expensive based on P/E ratio?

Ans. Thaai Casting trades at a P/E of 21.58, which is below its same-industry median of 24.67 and well below the average of 44.52. On supplied industry numbers alone, that does not look relatively stretched.

What does the P/B ratio of Thaai Casting show?

Ans. Thaai Casting’s P/B ratio is 3.26. That is above the industry median of 2.67 but below the industry average of 4.72, placing the stock in the middle of the sector’s broader valuation range.

How profitable is Thaai Casting compared with its industry?

Ans. Thaai Casting reports ROE of 15.56% and ROCE of 15.9%. Its ROE exactly matches the industry median of 15.56, while its ROCE sits below the industry median of 17.47 and average of 21.59.

What are Thaai Casting’s EPS, book value and dividend yield?

Ans. Thaai Casting has EPS of 5.24 and book value per share of Rs 34.72. Its dividend yield is 0, which means the supplied data currently points to no dividend yield contribution in the stock’s profile.

How does Thaai Casting compare with listed peers?

Ans. Thaai Casting’s P/E of 21.58 is lower than AIA Engineering, Steelcast, Alicon Castalloy, Investment & Precision Castings and PTC Industries. Its profitability is mixed, while its Rs 299.4 crore market cap is much smaller than those peers.

What should investors monitor next in Thaai Casting Stock News?

Ans. Investors may track whether Thaai Casting Share Price stabilises after touching Rs 98, how it behaves around current valuation levels, and whether profitability metrics like 15.56% ROE and 15.9% ROCE improve against industry benchmarks.