Ddev Plastiks Industries Ltd. (DDEVPLSTIK): Ddev Plastiks Industries Share Price Rises 8.18% Today

Ddev Plastiks Industries Ltd. traded at Rs 312, up 8.18% today, taking its market capitalisation to Rs 2,984.27 crore and placing the stock among notable small-cap gainers.

Ddev Plastiks Industries Share Price moved sharply higher on 06 August 2026, with the stock trading at Rs 312 at the time of the update, up Rs 23.6 or 8.18% from the previous close of Rs 288.4. With a market capitalisation of Rs 2,984.27 crore, the company sits in the Small Cap category, and today’s move was large enough to qualify under the workflow’s price rise screen for that category. For investors tracking Ddev Plastiks Industries Share Price Today, the verified data confirms a meaningful same-day gain backed by active trading and a move to the top end of the day’s range.

The stock opened at Rs 288.4, which was also the day’s low, and rose to an intraday high of Rs 312.8 before trading close to that level. That pattern matters because it shows the session started at the previous close and then strengthened through the day rather than giving up the gain quickly. Turnover stood at Rs 2.29 crore on the exchange identified for the event volume, while total traded volume across exchanges reached 7,95,323 shares.

For readers searching Ddev Plastiks Industries Stock News or asking why the stock is rising today, the supplied data clearly establishes the price event, the trading activity and the valuation backdrop. It does not, however, establish a company-specific catalyst. What investors can monitor next is whether the stock sustains this higher range, how its valuation compares with the Plastic Products industry, and whether its profitability metrics support continued attention. Univest views this as a data-led Ddev Plastiks Industries Share Price update rather than a call on direction.

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) Share Price Today: Price Action Analysis

Metric	Value
Current Price	Rs 312
Previous Close	Rs 288.4
Today's Change	+Rs 23.6 (+8.18%)
Day Open	Rs 288.4
Day High	Rs 312.8
Day Low	Rs 288.4
Current Volume (BSE)	73,362
BSE Traded Volume	73,362
NSE Traded Volume	7,21,961
Combined NSE + BSE Volume	7,95,323
Turnover	Rs 2.29 crore
Market Capitalisation	Rs 2,984.27 crore
Market Cap Category	Small Cap

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) traded at Rs 312. versus the previous close of Rs 288.4, a rise of 8.18%. The stock opened at Rs 288.4, reached Rs 312.8, touched Rs 288.4. Reported volume was 73,362.

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) Fundamental Analysis

Metric	Value
Market Capitalisation	Rs 2,984.27 crore
P/E Ratio	14.79x
P/B Ratio	2.95x
ROE	-53.85%
ROCE	-4.05%
EPS	Rs 19.5
Dividend Yield	0.43%

Ddev Plastiks Industries Ltd. was valued at a P/E ratio of 14.79x, a P/B ratio of 2.95x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of -53.85% and ROCE of -4.05%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 19.5, dividend yield of 0.43%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

Ddev Plastiks Industries Fundamental Analysis shows a mixed picture: the valuation multiples appear moderate against the industry on some measures, but profitability ratios are weak on the supplied numbers. The company’s market capitalisation stands at Rs 2,984.27 crore, placing it near the upper end of the listed Plastic Products names in the benchmark set. Its price-to-earnings ratio is 14.79 and its price-to-book ratio is 2.95. These are important because they show how the market is valuing current earnings and net worth per share at the present Ddev Plastiks Industries Share Price.

EPS is 19.5, which indicates the earnings attributable to each share based on the supplied data. Against a current price of Rs 312, that aligns with the reported P/E of 14.79 and suggests the stock is not being valued at the very high multiples seen in some peer names. Dividend yield is 0.43, which gives investors a historical payout reference relative to the current stock price. That is a factual income marker, but not a signal of future payouts.

The more challenging part of the financial picture lies in return ratios. ROE is -53.85 and ROCE is -4.05. Those figures indicate weak returns on shareholder equity and capital employed in the supplied snapshot, and they stand out because they are well below healthier double-digit levels often associated with stronger capital efficiency. In practical terms, this means the current Ddev Plastiks Industries Share Price Rise is occurring even as the reported return profile remains under pressure.

At the same time, valuation should be read in context rather than in isolation. A P/E of 14.79 is lower than many listed peers in the same industry, but the P/B of 2.95 is above the industry median and average, which suggests the market is assigning a richer multiple to book value than the benchmark middle. That contrast is why Univest treats the stock’s fundamental setup as nuanced rather than straightforward. The price move has brought fresh attention, but investors tracking Ddev Plastiks Industries Earnings, company financials and overall stock performance will also want to weigh earnings-based valuation against weaker profitability metrics before shifting focus to sector and ownership context.

Sector and Industry Context

Metric	Value
Sector	Plastic Products
Industry	Plastic Products
Benchmark Scope	same industry
Company P/E Ratio	14.79x
Benchmark Median P/E	20.13x
Benchmark Average P/E	37.52x
Benchmark P/E Range	1.08x to 349.26x
Company P/B Ratio	2.95x
Benchmark Median P/B	1.46x
Company ROE	-53.85%
Benchmark Median ROE	7.62%
Company ROCE	-4.05%
Benchmark Median ROCE	9.96%
Company Market Capitalisation	Rs 2,984.27 crore
Benchmark Median Market Cap	Rs 110.25 crore

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) is classified under sector: Plastic Products and industry: Plastic Products.

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) has a P/E ratio of 14.79x, which is below the benchmark median of 20.13x, a difference of -26.53%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) has a ROE of -53.85%, which is below the benchmark median of 7.62%, a difference of -806.69%. Ddev Plastiks Industries Ltd. (DDEVPLSTIK) has a ROCE of -4.05%, which is below the benchmark median of 9.96%, a difference of -140.66%.

Track today's top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

Ddev Plastiks Industries operates in the Plastic Products sector and industry, and the benchmark snapshot provides a useful frame for judging whether today’s stock move is occurring against a stretched or moderate valuation background. In a same-industry benchmark covering 134 companies, the company’s P/E of 14.79 sits below the median P/E of 20.13 and well below the average P/E of 37.52. The reported industry P/E range is wide, from 1.08 to 349.26, which shows how dispersed valuations are across this segment.

That comparison means Ddev Plastiks Industries Share Price is not trading at the higher earnings multiple end of the Plastic Products pack. On the other hand, the company’s P/B ratio of 2.95 is above the benchmark median of 1.46 and above the average of 1.81. The industry P/B range runs from -17.77 to 18.37, so the stock is still inside a broad spread, but it is clearly richer than the central tendency on book value terms.

Profitability comparisons are harder on the company. Its ROE of -53.85 is below the benchmark median ROE of 7.62 and below the average ROE of 11.53, based on 132 companies. Its ROCE of -4.05 is also below the benchmark median of 9.96 and average of 11.18, again across 132 companies. Those are meaningful gaps. Market capitalisation is where the company stands out in the opposite direction. With Rs 2,984.27 crore in market cap, it is far above the benchmark median market cap of Rs 110.25 crore and above the benchmark average of Rs 342.07 crore, while still slightly below the benchmark maximum of Rs 3,035.45 crore.

So the sector context is mixed. On earnings multiple, the stock screens below the industry’s central valuation levels. On book value and profitability, the picture is less comfortable. That makes Ddev Plastiks Industries Share Price News more interesting from an analysis standpoint: the stock is large for its industry cohort, modestly valued on P/E, but currently weak on return metrics relative to the same-industry benchmark tracked by Univest.

Peer Comparison

Company	Symbol	Market Cap (Cr)	P/E	P/B	ROE (%)	ROCE (%)
Prince Pipes and Fittings Ltd.	PRINCEPIPE	3,035.45	29.73	1.81	23.65	28.73
Xpro India Ltd.	XPROINDIA	2,782.18	79.8	3.4	40.04	22.21
EPACK PREFAB TECHN LTD	EPACKPEB	2,622.39	27.16	3.42	10.21	13.83
Nilkamal Ltd.	NILKAMAL	2,608.46	21.42	1.67	7.13	10.95
Cosmo First Ltd.	COSMOFIRST	2,423.37	15.41	1.5	39	30.79

Ddev Plastiks Industries Ltd. (DDEVPLSTIK) has a P/E ratio of 14.79x compared with the displayed peer median of 27.16x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of -53.85% compares with a peer median of 23.65% across the companies shown in the table. ROCE stood at -4.05% versus the displayed peer median of 22.21%, providing a capital-efficiency comparison. Ddev Plastiks Industries Ltd. (DDEVPLSTIK) has a market capitalisation of Rs 2,984.27 crore. Among the 5 peers shown, 1 have a larger market capitalisation.

Ddev Plastiks Industries sits in a closely matched market-cap band with several Plastic Products peers, which makes peer comparison particularly relevant after today’s share price gain. At Rs 2,984.27 crore, its market capitalisation is just below Prince Pipes and Fittings Ltd. at Rs 3,035.45 crore and above Xpro India Ltd. at Rs 2,782.18 crore, EPACK PREFAB TECHN LTD at Rs 2,622.39 crore and Nilkamal Ltd. at Rs 2,608.46 crore. That puts the company in the upper tier of its supplied peer set by size.

On valuation, Ddev Plastiks Industries has a P/E of 14.79. That is below Prince Pipes at 29.73, far below Xpro India at 79.8, below EPACK PREFAB TECHN at 27.16, below Nilkamal at 21.42 and slightly below Cosmo First Ltd. at 15.41. Only Jai Corp Ltd. at 10.8 trades at a lower supplied P/E among the peers that have that metric available. This makes the company look relatively inexpensive on earnings multiple versus most of the named peers.

However, the profitability comparison is less favourable. Ddev Plastiks Industries reports ROE of -53.85 and ROCE of -4.05. Those are weaker than Prince Pipes with ROE of 23.65 and ROCE of 28.73, Xpro India with 40.04 and 22.21, EPACK PREFAB TECHN with 10.21 and 13.83, Nilkamal with 7.13 and 10.95, Cosmo First with 39 and 30.79, Apollo Pipes with 13.19 and 16.68, Jain Irrigation Systems with 4.07 and 4.93, Jai Corp with 6.65 and 9.48, and Tarsons Products with 28.19 and 34.25.

Price-to-book also places the stock at 2.95, above Prince Pipes at 1.81, Nilkamal at 1.67, Cosmo First at 1.5, Jain Irrigation at 0.38 and Jai Corp at 1.23, but below Xpro India at 3.4 and EPACK PREFAB TECHN at 3.42. In short, Ddev Plastiks Industries Share Price appears cheaper than many peers on P/E, but that discount does not coincide with stronger reported returns on capital. That balance is central to any serious Ddev Plastiks Industries Stock News read-through.

Why Investors Are Watching Ddev Plastiks Industries

Ddev Plastiks Industries is in focus because today’s move was large enough to place it among notable small-cap gainers, while the underlying data presents a split between strong one-day price action and weaker reported profitability ratios. That combination often attracts both momentum-focused market participants and fundamental investors who want to know whether the valuation already reflects those risks.

• Price action: The stock rose 8.18% to Rs 312 from Rs 288.4 and held close to its intraday high of Rs 312.8.
• Volume: Total traded volume reached 7,95,323 shares, with 73,362 shares on BSE and 7,21,961 on NSE.
• Valuation context: P/E stands at 14.79, below the industry median of 20.13 and average of 37.52.
• Profitability context: ROE is -53.85 and ROCE is -4.05, both below industry medians.
• Sector position: Market capitalisation of Rs 2,984.27 crore is much larger than the industry median of Rs 110.25 crore.

What investors may monitor next is whether Ddev Plastiks Industries Share Price sustains this higher trading zone, whether turnover and total volume remain active in subsequent sessions, and whether the gap between moderate P/E valuation and weak return ratios begins to narrow in future company financials. Univest would frame this as a stock worth tracking closely, not a stock to classify simplistically after one session.

About Ddev Plastiks Industries

Ddev Plastiks Industries Ltd. is classified in the Plastic Products sector and industry. While the supplied dataset does not provide an extended business description, the company can still be placed in context through its market position within this listed industry set. At a market capitalisation of Rs 2,984.27 crore, it is one of the larger companies in the Plastic Products benchmark universe, sitting well above the industry median market cap of Rs 110.25 crore and close to the top end of the supplied size range.

That positioning matters because investors often look at companies in this segment through two lenses at the same time: scale and efficiency. Scale is visible in Ddev Plastiks Industries’ market value relative to many peers. Efficiency, however, is reflected in the supplied return metrics, where ROE and ROCE currently trail both industry medians and peer comparisons. This combination means the stock’s place in the industry is defined more by size and market valuation than by stronger reported returns in the current snapshot.

For readers following Ddev Plastiks Industries Share News, Ddev Plastiks Industries Latest News or broader Plastic Products company updates, the stock therefore stands out as a larger listed name within its peer group, but one whose financial interpretation still requires careful reading of valuation versus profitability. On Univest, that makes the company relevant not only as part of Stock Market Today movers, but also as a business that should be viewed in industry context rather than through a one-day price move alone.

Track Ddev Plastiks Industries Share Price on Univest

Use Ddev Plastiks Industries Ltd. (DDEVPLSTIK) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Users tracking Ddev Plastiks Industries Share Price on Univest can follow live share price changes, day high and low, market capitalisation, valuation ratios such as P/E and P/B, profitability markers like ROE and ROCE, and broader market insights around the Plastic Products industry. Univest also helps investors monitor 52-week trading context, stock performance trends, sector comparisons and peer positioning in one place. For anyone searching Ddev Plastiks Industries Share Price Live, Ddev Plastiks Industries Share Price Today or Ddev Plastiks Industries Stock Analysis, a structured platform view is useful because it places today’s price rise alongside fundamentals instead of isolating the move from the rest of the data.

Frequently Asked Questions

Why is Ddev Plastiks Industries Share Price rising today?

Ans. Ddev Plastiks Industries Share Price rose because the stock gained Rs 23.6, or 8.18%, to Rs 312 from the previous close of Rs 288.4. The supplied data confirms the move and active trading, but does not establish a company-specific catalyst.

What is Ddev Plastiks Industries Share Price Today?

Ans. Ddev Plastiks Industries Share Price Today was Rs 312 at the time of the update. The stock opened at Rs 288.4, touched a high of Rs 312.8, and held well above the day’s low of Rs 288.4.

How much did Ddev Plastiks Industries stock gain in today’s session?

Ans. The stock gained Rs 23.6 in absolute terms and 8.18% in percentage terms during the session covered in this article. That made Ddev Plastiks Industries one of the more visible small-cap price rise names today.

What does today’s intraday range show for Ddev Plastiks Industries?

Ans. The stock traded between Rs 288.4 and Rs 312.8, creating an intraday range of Rs 24.4. Because it traded near the upper end of that band, the session showed strength rather than a gain that faded sharply.

How much volume was traded in Ddev Plastiks Industries today?

Ans. Total traded volume was 7,95,323 shares, including 73,362 shares on BSE and 7,21,961 shares on NSE. The event exchange was BSE, where current volume was 73,362 shares and turnover stood at Rs 2.29 crore.

What is the market capitalisation of Ddev Plastiks Industries?

Ans. Ddev Plastiks Industries had a market capitalisation of Rs 2,984.27 crore in the supplied snapshot. That places it in the Small Cap category and also makes it much larger than the Plastic Products industry median market cap of Rs 110.25.

Is Ddev Plastiks Industries expensive compared with its industry on P/E?

Ans. On P/E, the stock does not look expensive relative to the supplied industry benchmark. Its P/E is 14.79, below the same-industry median of 20.13 and average of 37.52 across 109 companies with available P/E data.

How does Ddev Plastiks Industries compare on P/B and profitability?

Ans. The company’s P/B ratio is 2.95, above the industry median of 1.46 and average of 1.81. Profitability is weaker in the snapshot, with ROE at -53.85 and ROCE at -4.05, both below industry medians.

How does Ddev Plastiks Industries compare with peers like Prince Pipes and Xpro India?

Ans. Ddev Plastiks Industries has a lower P/E than Prince Pipes at 29.73 and Xpro India at 79.8, but its ROE of -53.85 and ROCE of -4.05 trail both peers by a wide margin in the supplied comparison set.

What should investors monitor next in Ddev Plastiks Industries Stock News?

Ans. Investors can monitor whether the stock sustains levels near Rs 312 after today’s rise, whether volume remains active after 7,95,323 shares traded, and how future financial performance compares with its current valuation and industry benchmark position.