3 Bimetal Parts Maker, Engineering Plastics Maker and Industrial Chemicals Company Stocks With a Strong Future Roadmap: Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers

Bimetal, engineering plastic and chemical stocks offer a focused view of a sector where demand keeps widening. Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers cover a bimetal parts maker, an engineering plastics maker and an industrial chemicals company.

This list covers three bimetal, engineering plastic and chemical stocks with complete current figures: Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers. Every figure comes from the latest reported financials and the 11 November 2026 market close. Companies without complete current figures were left out.

Click Here – Get Free Investment Predictions

What Are Bimetal, Engineering Plastic and Chemical Stocks?

Bimetal, engineering plastic and chemical stocks are listed companies that make bimetal strips and electrical contacts for appliances and power, mould engineering plastic parts for vehicles and appliances, and make industrial chemicals, mining chemicals and fertilisers. Their earnings depend on appliance and power demand, vehicle output and industrial chemical volumes.

Bimetal, Engineering Plastic and Chemical Stocks at a Glance

On valuation, Deepak Fertilisers trades at a P/E below the industry P/E, while Shivalik Bimetal and Shaily Engineering Plastics trade above it, which reflects the growth the market already expects. Readers comparing bimetal, engineering plastic and chemical stocks should look at return on equity and debt together, since a high return earned with low debt is easier to sustain. With the Q2 FY27 results season close, investors in bimetal, engineering plastic and chemical stocks can use the coming numbers to test whether growth is holding.

Why Do Bimetal, Engineering Plastic and Chemical Stocks Have a Strong Roadmap in India?

Bimetal, engineering plastic and chemical stocks have a strong roadmap in India because rising appliance and power equipment production, steady vehicle output and wider use of industrial chemicals keep widening the market for these companies.

• Bimetal parts. Appliances and grids need precise contacts.
• Engineering plastics. Vehicles use lighter moulded parts.
• Industrial chemicals. Mining and farms use chemical inputs.

Why Shivalik Bimetal Features Among These Bimetal, Engineering Plastic and Chemical Stocks

Among the bimetal, engineering plastic and chemical stocks on this list, Shivalik Bimetal Controls makes thermostatic bimetal strips, shunts and electrical contact components used in appliances, automobiles and electrical equipment, selling to customers in India and abroad.

In the June 2026 quarter, revenue grew 33.7% year on year to Rs 186 crore, while net profit rose 44.9% to Rs 33.0 crore. Revenue rose from Rs 329 crore in FY22 to Rs 583 crore in FY26, a compound annual growth rate of 15.3%.

Net profit grew from Rs 55.1 crore in FY22 to Rs 95.9 crore in FY26, which works out to a compound annual growth rate of 14.8%. The company has a return on equity of 19.9%, a debt to equity ratio of 0.13 and a market capitalisation of Rs 5,383 crore. The stock trades at a P/E of 50.7, above the industry P/E of 11.3.

Roadmap: The company is growing its shunt business for electric and hybrid vehicles and smart meters while adding new components for industrial and appliance customers. Its materials expertise supports a strong position in the niche.

What to watch: Follow shunt demand from electric vehicles and meters and new component launches.

Why Shaily Engineering Plastics Features Among These Bimetal, Engineering Plastic and Chemical Stocks

Among the electrical strip, polymer part and fertiliser shares on this list, Shaily Engineering Plastics makes precision injection moulded plastic components, including parts for medical drug-delivery devices, consumer products and automobiles, mainly for global customers.

The company has a return on equity of 23.7%, a debt to equity ratio of 0.25 and a market capitalisation of Rs 13,693 crore. The stock trades at a P/E of 77.5, above the industry P/E of 35.6.

Revenue rose from Rs 577 crore in FY22 to Rs 998 crore in FY26, a compound annual growth rate of 14.7%. Net profit grew from Rs 35.3 crore in FY22 to Rs 170 crore in FY26, which works out to a compound annual growth rate of 48.2%. In the June 2026 quarter, revenue grew 12.9% year on year to Rs 281 crore, while net profit rose 16.8% to Rs 48.0 crore.

Roadmap: The company is expanding in healthcare and consumer components, where global brands outsource complex moulding to trusted makers. Added capacity and new customer programmes support its order flow.

What to watch: Watch new customer programmes in drug-delivery devices and the pace of capacity additions.

Why Deepak Fertilisers Features Among These Bimetal, Engineering Plastic and Chemical Stocks

Among the three companies on this list, Deepak Fertilisers and Petrochemicals makes industrial chemicals such as ammonium nitrate and nitric acid for mining and industry, along with crop nutrients and fertilisers sold to farmers.

Revenue rose from Rs 7,707 crore in FY22 to Rs 11,609 crore in FY26, a compound annual growth rate of 10.8%. Net profit grew from Rs 468 crore in FY24 to Rs 739 crore in FY26, which works out to a compound annual growth rate of 25.7%.

In the June 2026 quarter, revenue grew 21.6% year on year to Rs 3,262 crore, while net profit rose 101.0% to Rs 490 crore. The company has a return on equity of 10.8%, a debt to equity ratio of 0.83 and a market capitalisation of Rs 14,354 crore. The stock trades at a P/E of 14.6, below the industry P/E of 33.2.

Roadmap: The company is expanding its chemical capacity for mining and industrial customers, which supports higher-value sales. Growing mining and infrastructure activity increases demand for its products.

What to watch: Follow mining demand, gas costs and progress on new chemical plants.

Shivalik Bimetal vs Shaily Engineering Plastics vs Deepak Fertilisers on Key Financials

The table below sets the three bimetal, engineering plastic and chemical stocks side by side on revenue, profit and margin, using reported figures.

Shaily Engineering Plastics posts the highest return on equity in this group at 23.7%. Deepak Fertilisers has the largest FY26 revenue at Rs 11,609 crore, and Shivalik Bimetal shows the fastest revenue growth with a 15.3% compound annual rate. A useful habit with bimetal, engineering plastic and chemical stocks is to check each new quarterly result against the capacity plans the company described earlier.

The June 2026 quarter, the latest reported, gives a fresh read on momentum:

Key Risks to Check Before Investing in Bimetal, Engineering Plastic and Chemical Stocks

Every theme carries risks that deserve a check before any decision. For these bimetal, engineering plastic and chemical stocks, the main points are: Long-term electrical strip, polymer part and fertiliser shares holders usually track revenue growth, margins and cash flow side by side rather than relying on a single ratio.

• Raw material costs. Ingredient and packaging prices can move margins.
• Production cycles. Vehicle output can vary with demand.
• Raw material and energy costs. Input prices can move margins in chemicals.

Treat this list as a starting point for research and not as a recommendation. Read the latest results presentation, check the management commentary on order books or capacity plans, and compare each company with its peers before you decide anything.

Use the Univest Stock Screener to filter bimetal, engineering plastic and chemical stocks by market capitalisation, P/E, ROE and growth, and build your own shortlist.

Final Thoughts on Bimetal, Engineering Plastic and Chemical Stocks

Bimetal, engineering plastic and chemical stocks reward patient research into demand, execution and financial strength. Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers each have a clear plan to grow. Based on the 11 November 2026 close, Shivalik Bimetal trades at Rs 1,044.1, Shaily Engineering Plastics at Rs 3,147 and Deepak Fertilisers at Rs 1,249.2. Valuation matters as much as growth, so compare each company's P/E with its industry P/E before adding any of these bimetal, engineering plastic and chemical stocks to a watchlist.

Download the Univest iOS App or Univest Android App to track bimetal, engineering plastic and chemical stocks, set price alerts and get research-backed stock ideas.

What are bimetal, engineering plastic and chemical stocks?

Ans. Bimetal, engineering plastic and chemical stocks are listed companies that make bimetal strips and electrical contacts for appliances and power, mould engineering plastic parts for vehicles and appliances, and make industrial chemicals, mining chemicals and fertilisers. Their earnings depend on appliance and power demand, vehicle output and industrial chemical volumes. This list looks at three of them, Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers, using reported FY22 to FY26 financials and the 11 November 2026 closing prices.

Which bimetal, engineering plastic and chemical stocks are covered in this list?

Ans. This list covers Shivalik Bimetal, Shaily Engineering Plastics and Deepak Fertilisers. Based on the 11 November 2026 close, Shivalik Bimetal traded at Rs 1,044.1, Shaily Engineering Plastics at Rs 3,147 and Deepak Fertilisers at Rs 1,249.2. Their return on equity ranges from 10.8% to 23.7%, and their revenue compound annual growth from FY22 to FY26 ranges from 10.8% to 15.3%.

Why do bimetal, engineering plastic and chemical stocks have a strong future roadmap in India?

Ans. Bimetal, engineering plastic and chemical stocks have a strong roadmap in India because rising appliance and power equipment production, steady vehicle output and wider use of industrial chemicals keep widening the market for these companies. The main drivers are as follows. Bimetal parts. Appliances and grids need precise contacts. Engineering plastics. Vehicles use lighter moulded parts. Industrial chemicals. Mining and farms use chemical inputs. Together these factors give the companies on this list a visible path for growth over the coming years.

How has Shivalik Bimetal performed financially?

Ans. Revenue rose from Rs 329 crore in FY22 to Rs 583 crore in FY26, a compound annual growth rate of 15.3%. Net profit grew from Rs 55.1 crore in FY22 to Rs 95.9 crore in FY26, which works out to a compound annual growth rate of 14.8%. In the June 2026 quarter, revenue grew 33.7% year on year to Rs 186 crore, while net profit rose 44.9% to Rs 33.0 crore. The company has a return on equity of 19.9%, a debt to equity ratio of 0.13 and a market capitalisation of Rs 5,383 crore. The stock trades at a P/E of 50.7, above the industry P/E of 11.3. Looking ahead, the company is growing its shunt business for electric and hybrid vehicles and smart meters while adding new components for industrial and appliance customers. Its materials expertise supports a strong position in the niche.

How has Shaily Engineering Plastics performed financially?

Ans. Revenue rose from Rs 577 crore in FY22 to Rs 998 crore in FY26, a compound annual growth rate of 14.7%. Net profit grew from Rs 35.3 crore in FY22 to Rs 170 crore in FY26, which works out to a compound annual growth rate of 48.2%. In the June 2026 quarter, revenue grew 12.9% year on year to Rs 281 crore, while net profit rose 16.8% to Rs 48.0 crore. The company has a return on equity of 23.7%, a debt to equity ratio of 0.25 and a market capitalisation of Rs 13,693 crore. The stock trades at a P/E of 77.5, above the industry P/E of 35.6. Looking ahead, the company is expanding in healthcare and consumer components, where global brands outsource complex moulding to trusted makers. Added capacity and new customer programmes support its order flow.

How has Deepak Fertilisers performed financially?

Ans. Revenue rose from Rs 7,707 crore in FY22 to Rs 11,609 crore in FY26, a compound annual growth rate of 10.8%. Net profit grew from Rs 468 crore in FY24 to Rs 739 crore in FY26, which works out to a compound annual growth rate of 25.7%. In the June 2026 quarter, revenue grew 21.6% year on year to Rs 3,262 crore, while net profit rose 101.0% to Rs 490 crore. The company has a return on equity of 10.8%, a debt to equity ratio of 0.83 and a market capitalisation of Rs 14,354 crore. The stock trades at a P/E of 14.6, below the industry P/E of 33.2. Looking ahead, the company is expanding its chemical capacity for mining and industrial customers, which supports higher-value sales. Growing mining and infrastructure activity increases demand for its products.

What risks should investors check before buying bimetal, engineering plastic and chemical stocks?

Ans. Investors should check a few risks before buying bimetal, engineering plastic and chemical stocks. Raw material costs. Ingredient and packaging prices can move margins. Production cycles. Vehicle output can vary with demand. Raw material and energy costs. Input prices can move margins in chemicals. Reading the latest results presentation and comparing each company with its peers helps judge how these risks apply to each stock.

Is this list of bimetal, engineering plastic and chemical stocks investment advice?

Ans. No. This article is educational and uses publicly available data as of the 11 November 2026 close. Please verify figures on NSE and BSE, read company filings and consult a SEBI registered adviser before investing. Univest is SEBI registered research analyst INH000013776.