Mold-Tek Technologies (MOLDTECH) Share Price Near 52-Week Low as Stock Trades at Rs 103

Mold-Tek Technologies Share Price is drawing attention today as MOLDTECH is trading at Rs 103, down 1.62% from the previous close of Rs 104.7, and moving close to its 52-week low with a market capitalisation of Rs 634.14 Cr. The latest Univest data confirms the price event, but it does not establish a company-specific catalyst. For readers tracking Mold-Tek Technologies Share Price Today, the move matters because the stock opened at Rs 109.6, touched Rs 109.6, and fell to Rs 99.5 before recovering part of the drop. In Univest stock news terms, this keeps Mold-Tek Technologies Stock News focused on price action, valuation and sector context rather than a verified trigger. The 14-day RSI stands at 71.54, which suggests the stock has been in a strong momentum zone even as it trades near a yearly low area.

For investors searching Mold-Tek Technologies Share Price Live or Mold-Tek Technologies Share Price Update, the combination of a sharp intraday range and a near 52-week trough makes the stock relevant for stock analysis, technical analysis and fundamental analysis. The current level also places Mold-Tek Technologies Share Price in a spot where market participants are likely to watch support behaviour, broad market sentiment and whether the move extends in Stock Market Today or Share Market Today conditions.

Mold-Tek Technologies Share Price Today: Price Action Analysis

Metric	Value
Current Price	Rs 103
Previous Close	Rs 104.7
Today's Move	Rs -1.7 (-1.62%)
Open	Rs 109.6
High	Rs 109.6
Low	Rs 99.5
Market Capitalisation	Rs 634.14 crore

Mold-Tek Technologies Ltd. (MOLDTECH) traded at Rs 103 versus the previous close of Rs 104.7, a fall of 1.62%. The stock opened at Rs 109.6, reached a high of Rs 109.6, touched a low of Rs 99.5.

Mold-Tek Technologies Share Price Today reflects a session that began at Rs 109.6, matched the same level as the day’s high, and slipped to Rs 99.5 before last trading at Rs 103. The previous close was Rs 104.7, so the stock was down Rs 1.7, or 1.62%. That places Mold-Tek Technologies Share Price near its 52-week low region and makes the day’s movement important for traders following Stocks in News and Top Losers Today screens.

The price action shows selling pressure after the open, but the stock did not remain at the low point of the day. For anyone scanning Mold-Tek Technologies Share Price Today, the gap between the day’s high and low is notable and signals active price discovery. Because the stock is near a 52-week low, investors often examine whether Rs 99.5 acts as a support level and whether Rs 103 can stabilise the move in the near term. Univest tracks such near-low setups because they often shape the next phase of price action in an Indian Stock Market update.

Another point to note in Mold-Tek Technologies Stock Analysis is that the current price of Rs 103 is 1.62% below the previous close, yet it remains above the day’s low. That makes the share price action mixed rather than one-directional. In Mold-Tek Technologies Share Price Today searches, this kind of movement typically draws attention from traders looking at 52 Week Low Stocks, Support Level behaviour and broader Market Movers across Capital Goods names.

The 14-day RSI of 71.54 also matters in this context. While the stock is near a one-year low zone on price, the RSI indicates that recent momentum has been firm. That contrast between price placement and momentum profile is exactly why Mold-Tek Technologies Share News is being watched closely on Univest.

Mold-Tek Technologies Ltd. (MOLDTECH) Fundamental Analysis

Metric	Value
Market Capitalisation	Rs 634.14 crore
P/E Ratio	32.76x
P/B Ratio	4.4x
ROE	10.22%
ROCE	14.33%
EPS	Rs 6.39
Book Value Per Share	Rs 47.6
Dividend Yield	0%

Mold-Tek Technologies Ltd. (MOLDTECH) fundamental metrics show P/E 32.76x, P/B 4.4x, ROE 10.22%, ROCE 14.33%. These figures provide context only and are not a buy or sell signal.

Mold-Tek Technologies Ltd. has a market capitalisation of Rs 634.14 crore, which gives readers a sense of company size before judging valuation. On valuation, P/E at 32.76x, P/B at 4.4x should be read against the sector and peer benchmarks rather than as a standalone signal. Profitability is represented by ROE of 10.22% and ROCE of 14.33%, helping investors compare shareholder returns and capital efficiency. According to latest Univest data, additional metrics include EPS of Rs 6.39, book value per share of Rs 47.6, dividend yield of 0%, adding context to earnings, balance-sheet value and historical payout. Against the latest Univest same industry benchmark, these figures can be compared with benchmark median P/E of 11.5x, median ROE of 15.14%, median ROCE of 21.26%. These numbers explain the fundamental backdrop without converting the article into a buy or sell view.

Sector and Industry Context

Metric	Value
Sector	Capital Goods
Industry	Engineering Consultancy
Benchmark Scope	same industry
Company P/E Ratio	32.76x
Benchmark Median P/E	11.5x
Benchmark Average P/E	76.56x
Benchmark P/E Range	0x to 973.79x
Company P/B Ratio	4.4x
Benchmark Median P/B	1.82x
Company ROE	10.22%
Benchmark Median ROE	15.14%
Company ROCE	14.33%
Benchmark Median ROCE	21.26%
Company Market Capitalisation	Rs 634.14 crore
Benchmark Median Market Cap	Rs 79.89 crore

Mold-Tek Technologies Ltd. (MOLDTECH) is classified under sector: Capital Goods and industry: Engineering Consultancy.

Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 32.76x, which is above the benchmark median of 11.5x, a difference of +184.87%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Mold-Tek Technologies Ltd. (MOLDTECH) has a ROE of 10.22%, which is below the benchmark median of 15.14%, a difference of -32.5%. Mold-Tek Technologies Ltd. (MOLDTECH) has a ROCE of 14.33%, which is below the benchmark median of 21.26%, a difference of -32.6%.

Track stocks falling to yearly lows through the Univest 52-week-low screener. The peer table below provides the company-level comparison.

Peer Comparison

Company	Symbol	Market Cap (Cr)	P/E	P/B	ROE (%)	ROCE (%)
Monarch Surveyors and Engineering Consultants Ltd.	MSECL	347.03	9.32	1.5	21.9	28.51
Likhami Consulting Ltd.	LIKHAMI	310.64	973.79	8.84	0.66	0.91
TELGE PROJECTS LIMITED	TELGE	249.75	39.92	5.35	23.5	24.46
HVAX Technologies Ltd.	HVAX	195.77	13.69	2.27	21.45	22.44
Winsol Engineers Ltd.	WINSOL	122.91	8.54	2.48	35.15	36.65

Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 32.76x compared with the displayed peer median of 13.69x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 10.22% compares with a peer median of 21.9% across the companies shown in the table. ROCE stood at 14.33% versus the displayed peer median of 24.46%, providing a capital-efficiency comparison. Mold-Tek Technologies Ltd. (MOLDTECH) has a market capitalisation of Rs 634.14 crore. Its market capitalisation is larger than each of the 5 peers shown.

Why Investors Are Watching Mold-Tek Technologies

• Mold-Tek Technologies Share Price is near a 52-week low, so price action is drawing attention in Market News.
• The day’s range from Rs 109.6 to Rs 99.5 shows active price swings in Mold-Tek Technologies Share Price Today.
• RSI at 71.54 keeps technical interest high even though the stock is near a yearly low area.
• P/E of 32.76 and P/B of 4.4 keep valuation in focus for Mold-Tek Technologies Fundamental Analysis.
• ROE of 10.22% and ROCE of 14.33% trail the industry median, shaping Mold-Tek Technologies Stock Analysis.

About Mold-Tek Technologies

Mold-Tek Technologies operates in the Capital Goods sector and the Engineering Consultancy industry. The company is tracked on both NSE and BSE under MOLDTECH, and its market positioning is best understood through its business profile, earnings profile and industry comparison. In Mold-Tek Technologies Share News, the company is treated as a mid-sized listed engineering consultancy name with a market cap of Rs 634.14 Cr.

The latest revenue figure available is Rs 59.54 Cr for Jun 2026, which gives a snapshot of recent operating scale. Investors tracking Mold-Tek Technologies Company News often look at how such revenue trends connect with earnings efficiency, valuation and peer comparison. The company’s EPS of 6.39, book value of Rs 47.6 and dividend yield of 0 help define its financial profile in a straightforward way.

For readers following Mold-Tek Technologies Stock Performance, the company overview is important because it ties together market cap, profitability and sector placement. Univest presents this context so that Mold-Tek Technologies Share Price Today can be assessed with both market data and business fundamentals in view.

Track Mold-Tek Technologies Share Price on Univest

Use Mold-Tek Technologies Ltd. (MOLDTECH) live share-price page, Univest 52-week-low screener, Univest market blogs to review live stock data, yearly-low lists and related market analysis.

Investors can track Mold-Tek Technologies Share Price on Univest for live share price updates, technical indicators, fundamental ratios, shareholding pattern, 52-week levels and market insights. Univest also helps users review Mold-Tek Technologies Latest News, market cap context and peer comparison in one place.

For those watching Mold-Tek Technologies Share Price Live, this is useful because it keeps the price action, valuation and sector lens connected. That makes Univest a practical reference point for Mold-Tek Technologies Share Price Today, especially when the stock is moving near a 52-week low.

Frequently Asked Questions

Why is Mold-Tek Technologies Share Price falling today?

Ans. Mold-Tek Technologies Share Price is down 1.62% at Rs 103 versus the previous close of Rs 104.7. Univest data confirms the move near a 52-week low, but it does not establish a company-specific catalyst.

What is Mold-Tek Technologies Share Price today?

Ans. Mold-Tek Technologies Share Price today is Rs 103. The stock traded between Rs 99.5 and Rs 109.6 in the current move, which keeps attention on short-term price action near a yearly low zone.

Is Mold-Tek Technologies near its 52-week low?

Ans. Yes. Mold-Tek Technologies Share Price is trading near its 52-week low, which is why it is appearing in 52 Week Low Stocks screens. The move is notable even without a verified catalyst.

How is Mold-Tek Technologies valued versus peers?

Ans. Mold-Tek Technologies has a P/E of 32.76 and P/B of 4.4. In its 16-company industry benchmark, both are above the median, so the valuation sits richer than the typical peer.

What do ROE and ROCE say about Mold-Tek Technologies?

Ans. ROE is 10.22% and ROCE is 14.33%. Both are below the industry medians, which suggests the company’s return efficiency trails the midpoint of its Engineering Consultancy peer set. ROE stands at 10.22%.

What is the market cap of Mold-Tek Technologies?

Ans. Mold-Tek Technologies has a market cap of Rs 634.14 Cr. That places it above the industry median market cap, although still well below the average of larger peers in the benchmark set.

Does Mold-Tek Technologies pay a dividend?

Ans. The dividend yield is 0, so the current data does not indicate a dividend return. Investors tracking Mold-Tek Technologies Share Price therefore focus more on earnings, valuation and stock performance.

How does Mold-Tek Technologies compare with Monarch Surveyors and Engineering Consultants?

Ans. Monarch Surveyors has a lower P/E of 9.32 and stronger ROE and ROCE at 21.9% and 28.51%. Mold-Tek Technologies is larger by market cap but trades at richer valuation multiples.

Where can I track Mold-Tek Technologies Share Price Live?

Ans. Univest tracks Mold-Tek Technologies Share Price Live with price action, 52-week levels, valuation ratios, peer comparison and sector context. That helps readers review Mold-Tek Technologies Stock News in one place.