METALIC TECHNOFORGE LTD (METALIC-SM) Share Price Within 2% of 52-Week High
- August 13, 2026
- Posted by: Harsh Piplani
- Category: News
METALIC TECHNOFORGE LTD Share Price stood at Rs 116.25, up in today’s trade and within 2% of its 52-week high. The company’s market capitalisation is Rs 261.19 crore.
METALIC TECHNOFORGE LTD Share Price is at Rs 116.25, and the stock is trading within 2% of its 52-week high, putting the forgings company on the radar of investors tracking fresh strength in smaller listed names. With a market capitalisation of Rs 261.19 crore, the company sits in the smaller end of the listed Automobile & Ancillaries space, but the current setup is notable because the Univest screener has identified it as close to its one-year peak.
That matters because stocks trading near their yearly highs often attract additional attention from market participants looking for strong relative positioning, valuation support or profitability metrics that stand out against industry benchmarks. In this case, the supplied data confirms the price event, but it does not establish a company-specific catalyst behind the move.
Still, METALIC TECHNOFORGE LTD Share Price is now being viewed not just through a price lens but also through its fundamentals. The company is trading at a P/E of 21.12 and a P/B of 6.55, while return ratios remain strong, with ROE at 36.28% and ROCE at 23.33%. For investors using Univest to monitor market setups, that combination of price proximity and profitability is what makes the stock worth tracking today.
METALIC TECHNOFORGE LTD Share Price Today: Within 2% of 52-Week High
| Metric | Value |
|---|---|
| LTP at 2% Qualification | Rs 116.25 |
| Market Capitalisation | Rs 261.19 crore |
| 52-Week High Position | Trading within 2% of its 52-week high |
METALIC TECHNOFORGE LTD (METALIC-SM) traded at Rs 116.25.
METALIC TECHNOFORGE LTD Share Price Today is Rs 116.25 at the event qualification timestamp recorded by Univest at 13 August 2026 at 1:31:10 PM IST. The screener identifies the stock as trading within 2% of its 52-week high, which means the counter is moving close to an important reference zone that many traders and long-term market watchers follow closely.
For METALIC TECHNOFORGE LTD Share Price, this kind of positioning can matter even without a confirmed breakout. A stock trading near its one-year high is often interpreted as a sign that it has held up better than weaker counters over the same period. It can also increase visibility because investors usually scan for stocks that are close to major price milestones but have not necessarily crossed them.
The current setup is especially relevant in the context of the company’s size. At Rs 261.19 crore in market capitalisation, METALIC TECHNOFORGE LTD Share Price can draw interest quickly when it approaches widely watched technical zones. The supplied data confirms the event, but it does not establish a specific reason for the move. That keeps the focus on what is verifiable: the stock is near its yearly high, valuation metrics are available for comparison, and the company operates in the Forgings industry within Automobile & Ancillaries.
For readers following METALIC TECHNOFORGE LTD Share Price Today on Univest, the next step is to examine whether the current attention is supported by the company’s financial ratios and how those ratios compare with the wider industry benchmark.
METALIC TECHNOFORGE LTD (METALIC-SM) Fundamental Analysis
| Metric | Value |
|---|---|
| Market Capitalisation | Rs 261.19 crore |
| P/E Ratio | 21.12x |
| P/B Ratio | 6.55x |
| ROE | 36.28% |
| ROCE | 23.33% |
| EPS | Rs 5.16 |
| Book Value Per Share | Rs 16.64 |
| Dividend Yield | 0% |
METALIC TECHNOFORGE LTD was valued at a P/E ratio of 21.12x, a P/B ratio of 6.55x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.
Profitability and capital efficiency were represented by ROE of 36.28% and ROCE of 23.33%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.
Per-share and shareholder-return metrics included EPS of Rs 5.16, book value per share of Rs 16.64, dividend yield of 0%. Dividend yield is a current or historical ratio and does not guarantee future distributions.
Sector and Industry Context
| Metric | Value |
|---|---|
| Sector | Automobile & Ancillaries |
| Industry | Forgings |
| Benchmark Scope | same industry |
| Company P/E Ratio | 21.12x |
| Benchmark Median P/E | 20.43x |
| Benchmark Average P/E | 38.2x |
| Benchmark P/E Range | 0x to 137.35x |
| Company P/B Ratio | 6.55x |
| Benchmark Median P/B | 2.72x |
| Company ROE | 36.28% |
| Benchmark Median ROE | 8.93% |
| Company ROCE | 23.33% |
| Benchmark Median ROCE | 11.65% |
| Company Market Capitalisation | Rs 261.19 crore |
| Benchmark Median Market Cap | Rs 122.69 crore |
METALIC TECHNOFORGE LTD (METALIC-SM) is classified under sector: Automobile & Ancillaries and industry: Forgings.
METALIC TECHNOFORGE LTD (METALIC-SM) has a P/E ratio of 21.12x, which is above the benchmark median of 20.43x, a difference of +3.38%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.
METALIC TECHNOFORGE LTD (METALIC-SM) has a ROE of 36.28%, which is above the benchmark median of 8.93%, a difference of +306.27%. METALIC TECHNOFORGE LTD (METALIC-SM) has a ROCE of 23.33%, which is above the benchmark median of 11.65%, a difference of +100.26%.
Track stocks reaching yearly peaks through the Univest 52-week-high screener. The peer table below provides the company-level comparison.
Peer Comparison
| Company | Symbol | Market Cap (Cr) | P/E | P/B | ROE (%) | ROCE (%) |
|---|---|---|---|---|---|---|
| Kalyani Forge Ltd. | KALYANIFRG | 253.06 | 20.43 | 2.62 | -1.74 | 0.77 |
| Krishanveer Forge Ltd. | KVFORGE | 150.14 | 13.29 | 2.81 | 12.68 | 16.5 |
| Smiths & Founders (India) Ltd. | SMFIL | 139.43 | 102.98 | 21.71 | 66.48 | 30.18 |
| LGB Forge Ltd. | LGBFORGE | 135.54 | 18.82 | 5.1 | 9.32 | 12.31 |
| Forge Auto International Ltd. | FORGEAUTO-SM | 122.69 | 11.34 | 2.11 | 32.14 | 21.86 |
METALIC TECHNOFORGE LTD (METALIC-SM) has a P/E ratio of 21.12x compared with the displayed peer median of 18.82x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 36.28% compares with a peer median of 12.68% across the companies shown in the table. ROCE stood at 23.33% versus the displayed peer median of 16.5%, providing a capital-efficiency comparison. METALIC TECHNOFORGE LTD (METALIC-SM) has a market capitalisation of Rs 261.19 crore. Among the 5 peers shown, 0 have a larger market capitalisation.
Why Investors Are Watching METALIC TECHNOFORGE LTD
- METALIC TECHNOFORGE LTD Share Price is at Rs 116.25 and the Univest screener identifies it as trading within 2% of its 52-week high.
- The company’s market capitalisation of Rs 261.19 crore places it in the smaller listed segment, where proximity to yearly highs often draws extra market attention.
- Valuation metrics are clearly defined, with a P/E of 21.12 and a P/B of 6.55, allowing direct comparison with forging-industry benchmarks.
- Profitability is notable, with ROE at 36.28% and ROCE at 23.33%, both above the same-industry medians supplied in the benchmark data.
- Peer comparison shows METALIC TECHNOFORGE LTD Share Price carries stronger return ratios than most of the supplied listed forging peers, even if its valuation is not the lowest.
About METALIC TECHNOFORGE LTD
METALIC TECHNOFORGE LTD operates in the Automobile & Ancillaries sector and is classified under the Forgings industry. Based on the supplied company context, METALIC TECHNOFORGE LTD Share Price is therefore linked to a manufacturing niche that serves a component-focused part of the automotive value chain.
For investors reading METALIC TECHNOFORGE LTD Stock News, the industry classification matters because forging businesses are often assessed through profitability, capital efficiency and valuation relative to other component makers rather than through broad sector labels alone. In this case, the same-industry benchmark used by Univest covers 15 forging companies, which gives a more focused context for interpreting the stock.
Because the supplied data is industry-led rather than description-led, the clearest takeaway is that METALIC TECHNOFORGE LTD Share Price should be evaluated within the forgings segment of Automobile & Ancillaries, where peer valuation and return ratios can vary sharply from one listed company to another.
Track METALIC TECHNOFORGE LTD Share Price on Univest
Use METALIC TECHNOFORGE LTD (METALIC-SM) live share-price page, Univest 52-week-high screener, Univest market blogs to review live stock data, yearly-high lists and related market analysis.
Investors tracking METALIC TECHNOFORGE LTD Share Price can use Univest to follow live price moves, 52-week levels, valuation ratios, profitability metrics, sector comparisons and peer data in one place. For a stock that is currently within 2% of its 52-week high, that consolidated view can help users monitor whether the market’s attention remains focused on price action alone or continues to be supported by fundamentals.
Univest also helps readers compare METALIC TECHNOFORGE LTD Share Price Today with industry medians, listed peers and core metrics such as P/E, P/B, ROE, ROCE, EPS and book value. For investors who prefer a data-led approach, that makes it easier to keep the stock on a watchlist without relying on speculation.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Frequently Asked Questions
What is METALIC TECHNOFORGE LTD Share Price today?
Ans. METALIC TECHNOFORGE LTD Share Price was Rs 116.25 at the Univest event timestamp on 13 August 2026 at 1:31:10 PM IST. The stock was also identified as trading within 2% of its 52-week high.
Why is METALIC TECHNOFORGE LTD Share Price in focus today?
Ans. METALIC TECHNOFORGE LTD Share Price is in focus because the Univest screener flagged it within 2% of its 52-week high. The stock also has a Rs 261.19 crore market capitalisation and strong reported return ratios.
What is the market capitalisation of METALIC TECHNOFORGE LTD?
Ans. METALIC TECHNOFORGE LTD has a market capitalisation of Rs 261.19 crore. That places the company above the same-industry median market cap of Rs 122.69 crore, though below the benchmark average of Rs 506.41 crore.
What do the valuation ratios show for METALIC TECHNOFORGE LTD Share Price?
Ans. METALIC TECHNOFORGE LTD Share Price is trading at a P/E of 21.12 and a P/B of 6.55. Its P/E is close to the industry median of 20.43, while its P/B is above the median of 2.72.
How profitable is METALIC TECHNOFORGE LTD based on supplied data?
Ans. The company reports ROE of 36.28% and ROCE of 23.33%, which are strong versus the same-industry medians of 8.93% and 11.65%. That profitability profile helps explain interest in METALIC TECHNOFORGE LTD Share Price.
What are the EPS, book value and dividend yield of METALIC TECHNOFORGE LTD?
Ans. METALIC TECHNOFORGE LTD reports EPS of Rs 5.16, book value per share of Rs 16.64 and dividend yield of 0. These figures indicate earnings support and balance-sheet value, but no current dividend yield contribution.
Which sector and industry does METALIC TECHNOFORGE LTD belong to?
Ans. METALIC TECHNOFORGE LTD belongs to the Automobile & Ancillaries sector and the Forgings industry. Univest compares it with a same-industry benchmark of 15 companies, which gives a narrower basis for valuation and profitability analysis.
How does METALIC TECHNOFORGE LTD compare with listed forging peers?
Ans. METALIC TECHNOFORGE LTD Share Price reflects a larger market cap than the five supplied peers and stronger ROE and ROCE than most of them. However, its P/B of 6.55 is higher than several comparable forging companies.
Where can investors track METALIC TECHNOFORGE LTD Share Price?
Ans. Investors can track METALIC TECHNOFORGE LTD Share Price on Univest for live price updates, 52-week levels, valuation ratios, peer comparison and sector benchmarks. That helps place daily price action in a broader analytical context.
