Macpower CNC Machines Ltd. (MACPOWER): Macpower CNC Machines Share Price Rises 8.63% as Stock Hits Rs 2,124
- September 22, 2026
- Posted by: Harsh Piplani
- Category: News
SUMMARY: Macpower CNC Machines Ltd. share price rose 8.63% to Rs 2,124, lifting its market capitalisation to Rs 1,956.11 Cr. Turnover stood at Rs 17.64 Cr.
Macpower CNC Machines Share Price moved higher today, with the stock closing at Rs 2,124 after an 8.63% gain from the previous close of Rs 1,955.30. The company’s market capitalisation stood at Rs 1,956.11 Cr, while turnover was Rs 17.64 Cr. The day’s range ran from Rs 1,945.20 to Rs 2,124, and the close matched the session high.
This Macpower CNC Machines Share Price update confirms a notable same-day price rise, but the supplied data does not establish a company-specific catalyst. For readers tracking Macpower CNC Machines Stock News, the important takeaway is the combination of a strong one-day move, a market cap just under Rs 2,000 Cr and a valuation profile that remains higher than the same-industry median on some measures. In Univest coverage terms, the move is best understood as an event-led stock update rather than a story with a verified trigger. Investors following Macpower CNC Machines Share Price Today can next watch how the price behaves relative to the opening level of Rs 1,956.60 and whether the closing print at Rs 2,124 is maintained in subsequent sessions.
Macpower CNC Machines Share Price Today: Price Action Analysis
| Metric | Value |
|---|---|
| Current Price | Rs 2,124 |
| Previous Close | Rs 1,955.3 |
| Today's Move | Rs 168.7 (+8.63%) |
| Open | Rs 1,956.6 |
| High | Rs 2,124 |
| Low | Rs 1,945.2 |
| Turnover | Rs 17.64 crore |
| Market Capitalisation | Rs 1,956.11 crore |
| Market Cap Category | Small Cap |
Macpower CNC Machines Ltd. (MACPOWER) rose to Rs 2,124 from the previous close of Rs 1,955.3, a move of Rs 168.7 or 8.63%. The stock opened at Rs 1,956.6, reached a high of Rs 2,124, recorded a low of Rs 1,945.2.
Macpower CNC Machines Share Price opened at Rs 1,956.60, touched a low of Rs 1,945.20 and finished at Rs 2,124, which was also the day’s high. That means the stock advanced Rs 168.70 over the previous close of Rs 1,955.30, translating into an 8.63% share price rise. The move places Macpower CNC Machines among the stronger names in today’s market update, with the latest close showing the full day’s recovery from the intraday low. For investors searching Macpower CNC Machines Share Price Today or Macpower CNC Machines Stock News, the verified facts show a clean upward session, supported by a close at the top of the range. Univest tracks the Macpower CNC Machines Share Price as part of its Indian stock market coverage and share market today updates.
Macpower CNC Machines Ltd. (MACPOWER) Fundamental Analysis
| Metric | Value |
|---|---|
| Market Capitalisation | Rs 1,956.11 crore |
| P/E Ratio | 50.29x |
| P/B Ratio | 10.58x |
| ROE | 21.3% |
| ROCE | 29.4% |
| EPS | Rs 38.88 |
| Book Value Per Share | Rs 184.75 |
| Dividend Yield | 0.08% |
Macpower CNC Machines Ltd. (MACPOWER) fundamental metrics show P/E 50.29x, P/B 10.58x, ROE 21.3%, ROCE 29.4%. These figures provide context only and are not a buy or sell signal.
Macpower CNC Machines Ltd. has a market capitalisation of Rs 1956.11 crore and falls in the Small Cap category, which gives readers a sense of company size before judging valuation. On valuation, P/E at 50.29x, P/B at 10.58x should be read against the sector and peer benchmarks rather than as a standalone signal. Profitability is represented by ROE of 21.3% and ROCE of 29.4%, helping investors compare shareholder returns and capital efficiency. Additional supplied metrics include EPS of Rs 38.88, book value per share of Rs 184.75, dividend yield of 0.08%, adding context to earnings, balance-sheet value and historical payout. Against the supplied same industry benchmark, these figures can be compared with benchmark median P/E of 29.17x, median ROE of 13.68%, median ROCE of 15.96%. These numbers explain the fundamental backdrop without converting the article into a buy or sell view.
Sector and Industry Context
| Metric | Value |
|---|---|
| Sector | Capital Goods |
| Industry | Engineering – Industrial Equipments |
| Benchmark Scope | same industry |
| Company P/E Ratio | 50.29x |
| Benchmark Median P/E | 29.17x |
| Benchmark Average P/E | 81.75x |
| Benchmark P/E Range | 0.54x to 4,664.08x |
| Company P/B Ratio | 10.58x |
| Benchmark Median P/B | 2.81x |
| Company ROE | 21.3% |
| Benchmark Median ROE | 13.68% |
| Company ROCE | 29.4% |
| Benchmark Median ROCE | 15.96% |
| Company Market Capitalisation | Rs 1,956.11 crore |
| Benchmark Median Market Cap | Rs 366.4 crore |
Macpower CNC Machines Ltd. (MACPOWER) is classified under sector: Capital Goods and industry: Engineering – Industrial Equipments.
Macpower CNC Machines Ltd. (MACPOWER) has a P/E ratio of 50.29x, which is above the benchmark median of 29.17x, a difference of +72.4%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.
Macpower CNC Machines Ltd. (MACPOWER) has a ROE of 21.3%, which is above the benchmark median of 13.68%, a difference of +55.7%. Macpower CNC Machines Ltd. (MACPOWER) has a ROCE of 29.4%, which is above the benchmark median of 15.96%, a difference of +84.21%.
Track stocks leading today through the Univest top gainers screener. The peer table below provides the company-level comparison.
Peer Comparison
| Company | Symbol | Market Cap (Cr) | P/E | P/B | ROE (%) | ROCE (%) |
|---|---|---|---|---|---|---|
| Bharat Heavy Electricals Ltd. | BHEL | 1,51,121.55 | 62.02 | 5.69 | 6.29 | 9.24 |
| Thermax Ltd. | THERMAX | 42,305.85 | 71.91 | 7.67 | 13.76 | 15.85 |
| Jyoti CNC Automation Ltd. | JYOTICNC | 23,886.25 | 78.72 | 12.3 | 18.22 | 21.34 |
| Inox India Ltd. | INOXINDIA | 19,077.8 | 74.4 | 16.26 | 26.11 | 33.54 |
| Triveni Turbine Ltd. | TRITURBINE | 18,082.06 | 52.52 | 11.83 | 26.32 | 35.95 |
Macpower CNC Machines Ltd. (MACPOWER) has a P/E ratio of 50.29x compared with the displayed peer median of 71.91x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 21.3% compares with a peer median of 18.22% across the companies shown in the table. ROCE stood at 29.4% versus the displayed peer median of 21.34%, providing a capital-efficiency comparison. Macpower CNC Machines Ltd. (MACPOWER) has a market capitalisation of Rs 1,956.11 crore. Among the 5 peers shown, 5 have a larger market capitalisation.
Why Investors Are Watching Macpower CNC Machines
- Macpower CNC Machines Share Price rose 8.63% today to Rs 2,124.
- The stock closed at the day’s high of Rs 2,124 after opening at Rs 1,956.60.
- Market capitalisation stood at Rs 1,956.11 Cr, below the same-industry average of Rs 2,870.17 Cr.
- P/E is 50.29 and P/B is 10.58, both above the same-industry median.
- ROE of 21.3% and ROCE of 29.4% are above the same-industry median and average.
About Macpower CNC Machines
Macpower CNC Machines Ltd. operates in the Capital Goods sector and the Engineering – Industrial Equipments industry. The company is part of the industrial machinery and equipment ecosystem, where productivity, manufacturing precision and capital spending cycles typically matter for business performance. Based on the supplied data, the company’s current market position is reflected in its market capitalisation of Rs 1,956.11 Cr and its listing context within a broad industry benchmark set of 163 companies.
For readers following Macpower CNC Machines Company News or Macpower CNC Machines Latest News, the core company profile here is straightforward: it is an industrial equipment business with profitability metrics that compare favourably with the industry median. The stock’s latest move therefore sits within a clearly defined manufacturing and engineering backdrop, which is why Univest classifies it under Capital Goods coverage and tracks it as part of wider stock market today analysis.
Track Macpower CNC Machines Share Price on Univest
Use Macpower CNC Machines Ltd. (MACPOWER) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top-gainers lists and related market analysis.
Readers can track Macpower CNC Machines Share Price on Univest for live price updates, fundamental ratios, market capitalisation, shareholding pattern, 52-week levels and broader market insights. Univest also presents Macpower CNC Machines Stock News in a format that connects today’s move with valuation, sector context and company-level data.
For investors who follow Macpower CNC Machines Share Price Live, Macpower CNC Machines Share Price Today and Macpower CNC Machines Stock Performance, Univest brings the latest stock update together with the company’s key financial ratios in one place. That makes it easier to monitor the next session without relying on scattered market notes.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Frequently Asked Questions
Why did Macpower CNC Machines share price rise today?
Ans. The supplied data confirms an 8.63% rise to Rs 2,124, but it does not establish a company-specific catalyst. The move is verified through the day’s open, high, low and previous close.
What is Macpower CNC Machines share price today?
Ans. Macpower CNC Machines share price today is Rs 2,124. It rose Rs 168.70 from the previous close of Rs 1,955.30 and finished at the day’s high, which strengthens the session summary.
What is Macpower CNC Machines market cap?
Ans. Macpower CNC Machines market capitalisation is Rs 1,956.11 Cr. That places it above the same-industry median of Rs 366.40 Cr, while remaining below the same-industry average of Rs 2,870.17 Cr.
Is Macpower CNC Machines expensive compared with its peers?
Ans. Its P/E of 50.29 and P/B of 10.58 are above the same-industry median, so the stock trades at a richer valuation than the typical company in the benchmark set. Comparable listed companies include Bharat Heavy Electricals Ltd., Thermax Ltd., Jyoti.
How do Macpower CNC Machines fundamentals look?
Ans. ROE is 21.3% and ROCE is 29.4%, both above the industry median and average. EPS is Rs 38.88 and book value is Rs 184.75, which adds useful context to the share price move.
What does the sector comparison show for Macpower CNC Machines?
Ans. In the Capital Goods sector’s Engineering – Industrial Equipments industry, the company’s P/E and P/B stand above the benchmark median, while ROE and ROCE also sit above benchmark centre values.
How does Macpower CNC Machines compare with Thermax and Jyoti CNC Automation?
Ans. Macpower CNC Machines has a lower market cap than both peers, but its ROE and ROCE are above Thermax and below Jyoti CNC Automation on return metrics. Its valuation also sits differently from each peer.
Where can investors track Macpower CNC Machines share price live?
Ans. Investors can track Macpower CNC Machines share price live on Univest, where the stock page brings together price, valuation, market cap, shareholding pattern and other company-level market insights in one place.
