3 Laminated Tubes Maker, Precision Moulded Parts Producer and Synthetic Leather Specialist Stocks With a Strong Future Roadmap: EPL, Shaily Engineering Plastics and Mayur Uniquoters
- October 26, 2026
- Posted by: Harsh Piplani
- Category: Best Stocks
EPL, Shaily Engineering Plastics and Mayur Uniquoters: ROE of 13.6% to 23.7% and FY22 to FY26 revenue CAGR of 8.7% to 14.7%. Prices as of 23 Oct 2026.
Quick Answer
The three tube, moulded plastic and faux leather stocks to watch are EPL, Shaily Engineering Plastics and Mayur Uniquoters. Their return on equity ranges from 13.6% to 23.7%, and their revenue compound annual growth from FY22 to FY26 ranges from 8.7% to 14.7%. Shaily Engineering Plastics leads on both return on equity at 23.7% and revenue growth at 14.7% a year. Prices are based on the 23 October 2026 close, and this article is educational, not investment advice.
Tube, moulded plastic and faux leather stocks bring together companies with a visible plan for the years ahead. EPL, Shaily Engineering Plastics and Mayur Uniquoters cover a laminated tubes maker, a precision moulded parts producer and a synthetic leather specialist.
This list covers three tube, moulded plastic and faux leather stocks with complete current figures: EPL, Shaily Engineering Plastics and Mayur Uniquoters. Every figure comes from the latest reported financials and the 23 October 2026 market close. Companies without complete current figures were left out.
Click Here – Get Free Investment Predictions
What Are Tube, Moulded Plastic and Faux Leather Stocks?
Tube, moulded plastic and faux leather stocks are listed manufacturers that make toothpaste tubes, moulded plastic parts and artificial leather for consumer, medical and automotive customers. Their earnings depend on brand orders, export demand and input costs.
Tube, Moulded Plastic and Faux Leather Stocks at a Glance
| Company | CMP (Rs) | Market Cap (Rs Cr) | P/E | Industry P/E | ROE (%) | D/E |
|---|---|---|---|---|---|---|
| EPL | 221.81 | 7,244 | 18.4 | 21.7 | 13.6 | 0.34 |
| Shaily Engineering Plastics | 2,937.2 | 13,693 | 77.5 | 35.6 | 23.7 | 0.25 |
| Mayur Uniquoters | 703.6 | 3,260 | 15.7 | 37.9 | 16.9 | 0.01 |
On valuation, EPL and Mayur Uniquoters trade at a P/E below the industry P/E, while Shaily Engineering Plastics trades above it, which reflects the growth the market already expects. Readers comparing tube, moulded plastic and faux leather stocks should look at return on equity and debt together, since a high return earned with low debt is easier to sustain. With the Q2 FY27 results season close, investors in tube, moulded plastic and faux leather stocks can use the coming numbers to test whether growth is holding.
Why Do Tube, Moulded Plastic and Faux Leather Stocks Have a Strong Roadmap in India?
Tube, moulded plastic and faux leather stocks have a strong roadmap in India because personal care growth, medical device sourcing and car upholstery demand keep lifting orders for specialised makers.
- Personal care. Global brands need tubes for creams and pastes.
- Medical parts. Drug-delivery makers source precision components.
- Car interiors. Vehicle makers use synthetic leather upholstery.
Why EPL Features Among These Tube, Moulded Plastic and Faux Leather Stocks
Among the tube, moulded plastic and faux leather stocks on this list, EPL is among the world’s largest makers of laminated plastic tubes used for toothpaste, beauty, personal care and pharmaceutical products. It operates plants across Asia, Europe, the Americas and Africa.
Revenue rose from Rs 3,445 crore in FY22 to Rs 4,806 crore in FY26, a compound annual growth rate of 8.7%. Net profit grew from Rs 221 crore in FY22 to Rs 394 crore in FY26, which works out to a compound annual growth rate of 15.5%.
In the June 2026 quarter, revenue grew 24.7% year on year to Rs 1,392 crore. The company has a return on equity of 13.6%, a debt to equity ratio of 0.34 and a market capitalisation of Rs 7,244 crore. The stock trades at a P/E of 18.4, below the industry P/E of 21.7.
Roadmap: The company is growing sustainable tube formats such as recyclable tubes, which global brands increasingly prefer. A wide plant network lets it serve large customers in many regions.
What to watch: Track the share of sustainable tubes in sales and volume growth in beauty and personal care.
Why Shaily Engineering Plastics Features Among These Tube, Moulded Plastic and Faux Leather Stocks
Among the laminated tube company shares on this list, Shaily Engineering Plastics makes precision injection moulded plastic components, including parts for medical drug-delivery devices, consumer products and automobiles, mainly for global customers.
In the June 2026 quarter, revenue grew 12.9% year on year to Rs 281 crore, while net profit rose 16.8% to Rs 48.0 crore. Revenue rose from Rs 577 crore in FY22 to Rs 998 crore in FY26, a compound annual growth rate of 14.7%.
Net profit grew from Rs 35.3 crore in FY22 to Rs 170 crore in FY26, which works out to a compound annual growth rate of 48.2%. The company has a return on equity of 23.7%, a debt to equity ratio of 0.25 and a market capitalisation of Rs 13,693 crore. The stock trades at a P/E of 77.5, above the industry P/E of 35.6.
Roadmap: The company is expanding in healthcare and consumer components, where global brands outsource complex moulding to trusted makers. Added capacity and new customer programmes support its order flow.
What to watch: Watch new customer programmes in drug-delivery devices and the pace of capacity additions.
Why Mayur Uniquoters Features Among These Tube, Moulded Plastic and Faux Leather Stocks
Among the three companies on this list, Mayur Uniquoters is a Rajasthan-based maker of artificial leather and synthetic fabrics used in footwear, automotive upholstery, furniture and other applications.
The company has a return on equity of 16.9%, a debt to equity ratio of 0.01 and a market capitalisation of Rs 3,260 crore. The stock trades at a P/E of 15.7, below the industry P/E of 37.9.
Revenue rose from Rs 677 crore in FY22 to Rs 1,022 crore in FY26, a compound annual growth rate of 10.9%. Net profit grew from Rs 94.4 crore in FY22 to Rs 192 crore in FY26, which works out to a compound annual growth rate of 19.4%. In the June 2026 quarter, revenue grew 24.1% year on year to Rs 292 crore, while net profit rose 37.8% to Rs 56.1 crore.
Roadmap: The company supplies automotive and footwear customers in India and overseas, and demand for synthetic leather is growing as it replaces genuine leather. A debt-free balance sheet allows it to invest in new products and capacity.
What to watch: Check the volume trend in automotive and footwear customers and export sales.
EPL vs Shaily Engineering Plastics vs Mayur Uniquoters on Key Financials
The table below sets the three tube, moulded plastic and faux leather stocks side by side on revenue, profit and margin, using reported figures.
| Company | FY22 Revenue (Rs Cr) | FY26 Revenue (Rs Cr) | Revenue CAGR (FY22-FY26) | FY26 Net Profit (Rs Cr) | FY26 Net Margin |
|---|---|---|---|---|---|
| EPL | 3,445 | 4,806 | 8.7% | 394 | 8.2% |
| Shaily Engineering Plastics | 577 | 998 | 14.7% | 170 | 17.0% |
| Mayur Uniquoters | 677 | 1,022 | 10.9% | 192 | 18.8% |
Shaily Engineering Plastics posts the highest return on equity in this group at 23.7%. EPL has the largest FY26 revenue at Rs 4,806 crore, and Shaily Engineering Plastics shows the fastest revenue growth with a 14.7% compound annual rate. A useful habit with tube, moulded plastic and faux leather stocks is to check each new quarterly result against the capacity plans the company described earlier.
The June 2026 quarter, the latest reported, gives a fresh read on momentum:
| Company | Q1 FY26 Revenue (Rs Cr) | Q1 FY27 Revenue (Rs Cr) | Year-on-Year Growth |
|---|---|---|---|
| EPL | 1,116 | 1,392 | 24.7% |
| Shaily Engineering Plastics | 249 | 281 | 12.9% |
| Mayur Uniquoters | 235 | 292 | 24.1% |
Key Risks to Check Before Investing in Tube, Moulded Plastic and Faux Leather Stocks
Every theme carries risks that deserve a check before any decision. For these tube, moulded plastic and faux leather stocks, the main points are: Long-term laminated tube company shares holders usually track revenue growth, margins and cash flow side by side rather than relying on a single ratio.
- Input costs. Resin and chemical prices affect margins.
- Customer concentration. Some products depend on a few large buyers.
- Valuation levels. Some of these companies trade at high earnings multiples, so growth must continue to justify them.
Treat this list as a starting point for research and not as a recommendation. Read the latest results presentation, check the management commentary on order books or capacity plans, and compare each company with its peers before you decide anything.
Use the Univest Stock Screener to filter tube, moulded plastic and faux leather stocks by market capitalisation, P/E, ROE and growth, and build your own shortlist.
Final Thoughts on Tube, Moulded Plastic and Faux Leather Stocks
Tube, moulded plastic and faux leather stocks suit investors who prefer to study business strength before price moves. EPL, Shaily Engineering Plastics and Mayur Uniquoters each have a clear plan to grow. Based on the 23 October 2026 close, EPL trades at Rs 221.81, Shaily Engineering Plastics at Rs 2,937.2 and Mayur Uniquoters at Rs 703.6. Valuation matters as much as growth, so compare each company’s P/E with its industry P/E before adding any of these tube, moulded plastic and faux leather stocks to a watchlist.
Download the Univest iOS App or Univest Android App to track tube, moulded plastic and faux leather stocks, set price alerts and get research-backed stock ideas.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
What are tube, moulded plastic and faux leather stocks?
Ans. Tube, moulded plastic and faux leather stocks are listed manufacturers that make toothpaste tubes, moulded plastic parts and artificial leather for consumer, medical and automotive customers. Their earnings depend on brand orders, export demand and input costs. This list looks at three of them, EPL, Shaily Engineering Plastics and Mayur Uniquoters, using reported FY22 to FY26 financials and the 23 October 2026 closing prices.
Which tube, moulded plastic and faux leather stocks are covered in this list?
Ans. This list covers EPL, Shaily Engineering Plastics and Mayur Uniquoters. Based on the 23 October 2026 close, EPL traded at Rs 221.81, Shaily Engineering Plastics at Rs 2,937.2 and Mayur Uniquoters at Rs 703.6. Their return on equity ranges from 13.6% to 23.7%, and their revenue compound annual growth from FY22 to FY26 ranges from 8.7% to 14.7%.
Why do tube, moulded plastic and faux leather stocks have a strong future roadmap in India?
Ans. Tube, moulded plastic and faux leather stocks have a strong roadmap in India because personal care growth, medical device sourcing and car upholstery demand keep lifting orders for specialised makers. The main drivers are as follows. Personal care. Global brands need tubes for creams and pastes. Medical parts. Drug-delivery makers source precision components. Car interiors. Vehicle makers use synthetic leather upholstery. Together these factors give the companies on this list a visible path for growth over the coming years.
How has EPL performed financially?
Ans. Revenue rose from Rs 3,445 crore in FY22 to Rs 4,806 crore in FY26, a compound annual growth rate of 8.7%. Net profit grew from Rs 221 crore in FY22 to Rs 394 crore in FY26, which works out to a compound annual growth rate of 15.5%. In the June 2026 quarter, revenue grew 24.7% year on year to Rs 1,392 crore. The company has a return on equity of 13.6%, a debt to equity ratio of 0.34 and a market capitalisation of Rs 7,244 crore. The stock trades at a P/E of 18.4, below the industry P/E of 21.7. Looking ahead, the company is growing sustainable tube formats such as recyclable tubes, which global brands increasingly prefer. A wide plant network lets it serve large customers in many regions.
How has Shaily Engineering Plastics performed financially?
Ans. Revenue rose from Rs 577 crore in FY22 to Rs 998 crore in FY26, a compound annual growth rate of 14.7%. Net profit grew from Rs 35.3 crore in FY22 to Rs 170 crore in FY26, which works out to a compound annual growth rate of 48.2%. In the June 2026 quarter, revenue grew 12.9% year on year to Rs 281 crore, while net profit rose 16.8% to Rs 48.0 crore. The company has a return on equity of 23.7%, a debt to equity ratio of 0.25 and a market capitalisation of Rs 13,693 crore. The stock trades at a P/E of 77.5, above the industry P/E of 35.6. Looking ahead, the company is expanding in healthcare and consumer components, where global brands outsource complex moulding to trusted makers. Added capacity and new customer programmes support its order flow.
How has Mayur Uniquoters performed financially?
Ans. Revenue rose from Rs 677 crore in FY22 to Rs 1,022 crore in FY26, a compound annual growth rate of 10.9%. Net profit grew from Rs 94.4 crore in FY22 to Rs 192 crore in FY26, which works out to a compound annual growth rate of 19.4%. In the June 2026 quarter, revenue grew 24.1% year on year to Rs 292 crore, while net profit rose 37.8% to Rs 56.1 crore. The company has a return on equity of 16.9%, a debt to equity ratio of 0.01 and a market capitalisation of Rs 3,260 crore. The stock trades at a P/E of 15.7, below the industry P/E of 37.9. Looking ahead, the company supplies automotive and footwear customers in India and overseas, and demand for synthetic leather is growing as it replaces genuine leather. A debt-free balance sheet allows it to invest in new products and capacity.
What risks should investors check before buying tube, moulded plastic and faux leather stocks?
Ans. Investors should check a few risks before buying tube, moulded plastic and faux leather stocks. Input costs. Resin and chemical prices affect margins. Customer concentration. Some products depend on a few large buyers. Valuation levels. Some of these companies trade at high earnings multiples, so growth must continue to justify them. Reading the latest results presentation and comparing each company with its peers helps judge how these risks apply to each stock.
Is this list of tube, moulded plastic and faux leather stocks investment advice?
Ans. No. This article is educational and uses publicly available data as of the 23 October 2026 close. Please verify figures on NSE and BSE, read company filings and consult a SEBI registered adviser before investing. Univest is SEBI registered research analyst INH000013776.
