Is Telge Projects the Best Stock in Its Sector? A Look at the Numbers

Is Telge Projects the best stock in its sector? The stock trades on the BSE at Rs 235 as of 21 October 2026, within its 52-week range of Rs 77.05 to Rs 283.95. The sections below cover the business, the key ratios, a peer comparison and a closer look at valuation.

Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers

Click Here – Get Free Investment Predictions

About Telge Projects

Telge Projects Ltd is engaged in a comprehensive range of engineering design services, and company information says it was incorporated on 16 January 2018. It is an engineering design and BIM services provider for EPC firms, fabricators and contractors, offering 3D modelling, structural engineering design, material take-offs, 2D drafting and architectural design with a focus on BIM-driven 3D workflows. At a market capitalisation of Rs 230 Cr, it is tracked as part of the Engineering Design and BIM Services sector on Univest.

Is Telge Projects the Best Stock in Its Sector?

Telge Projects' case in the sector rests on return quality rather than cheap valuation, since the stock trades at a premium to its Industry P/E. Telge Projects' 28.62x P/E is below Tata Elxsi at 33.61x and Cyient at 31.46x, though above the 22.72x Industry P/E, while its 17.22% ROE is lower than Tata Elxsi at 24.73%, though higher than Cyient at 8.48%, and its debt to equity ratio of 0.18 is above Tata Elxsi at 0.05 and Cyient at 0.08.

Metric	Telge Projects
CMP (BSE)	Rs 235.00
52-Week High / Low	Rs 283.95 / Rs 77.05
Market Cap	Rs 230 Cr
P/E (TTM) vs Industry P/E	28.62x vs 22.72x
P/B	5.19
ROE	17.22%
EPS (TTM)	Rs 8.21
Dividend Yield	0.00%
Debt to Equity	0.18

Compare Telge Projects Against Other Engineering Design and BIM Services Sector Stocks

How Telge Projects Compares Against Its Engineering Design and BIM Services Sector Peers

The table below sets Telge Projects against 2 other Engineering Design and BIM Services sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.

Company	Market Cap (Rs Cr)	P/E	ROE	Debt to Equity
Telge Projects	230	28.62	17.22%	0.18
Tata Elxsi	22,524	33.61	24.73%	0.05
Cyient	13,032	31.46	8.48%	0.08
Peer average (2 companies)	-	32.53	16.61%	0.07

Measured against the peer averages, Telge Projects' P/E is 12 percent below the 32.53x average, and its ROE is 0.61 percentage points above the 16.61% average. An average of just two companies is a rough guide, so treat the gap as a pointer for further research and not as a verdict.

What Makes Telge Projects Worth Watching in Engineering Design and BIM Services

• Scale: At Rs 230 Cr, its market capitalisation is smaller than Tata Elxsi (Rs 22,524 Cr) and Cyient (Rs 13,032 Cr), which is a useful reminder that the peers differ in size as well as in valuation.
• Sector drivers: Outsourced design and BIM work from EPC firms, fabricators and contractors, and a shift from 2D drafting to 3D workflows, drive order flow.
• Key risk: Revenue depends on a steady pipeline of design assignments from EPC and fabrication clients, so utilisation of its design teams matters. Trading in the share is thin.

Telge Projects Valuation: Is It Justified?

At a P/B ratio of 5.19, the market pays about Rs 5.19 for every rupee of book value, and the EPS (TTM) of Rs 8.21 is the earnings base behind the P/E. The stock trades about 17 percent below its 52-week high and about 3.0 times its 52-week low. The company does not currently show a dividend yield, so returns for shareholders depend mainly on the share price. As with any single stock, investors should weigh these figures against their own valuation discipline and risk appetite rather than the sector label alone.

Also read – Is Oracle Financial Services Software the Best Stock in Its Sector? A Look at the Numbers

Download the Univest iOS App or Univest Android App to track Telge Projects and other Engineering Design and BIM Services sector stocks.

How to Track Telge Projects Before You Invest

Before deciding whether Telge Projects deserves its label as the best stock in its sector for your own portfolio, compare it directly against Engineering Design and BIM Services sector peers using the steps below.

1. Open the Univest Screener and search for Telge Projects to view live price, valuation ratios, and peer comparisons within the Engineering Design and BIM Services sector.
2. Compare its P/E, P/B, and ROE against other Engineering Design and BIM Services sector stocks before deciding if the current valuation fits your strategy.
3. Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
4. Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.

Conclusion

Telge Projects gives investors a clear set of numbers to work with, from returns and valuation to leverage and peer standing. Whether it earns the label of best stock in Engineering Design and BIM Services depends on how much weight you give each of them and on how the business executes from here. Because the stock trades above its sector benchmark, execution matters more than usual if the current valuation is to hold. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.

Is Telge Projects the best stock in its sector?

Ans. There is no single definitive answer, because the best stock in a sector depends on whether an investor is prioritising returns, valuation or balance sheet strength. Telge Projects has a 17.22% ROE and trades at 28.62x P/E against a 22.72x Industry P/E. Against the 2 peers compared in this article, its ROE is above the 16.61% peer average and its P/E is below the 32.53x peer average. Its debt to equity ratio of 0.18 is above the 0.07 peer average, which matters because borrowing can inflate returns and add risk when business conditions weaken. These figures are best read together rather than in isolation, and they work as a starting point for your own research and not as a verdict.

What is the current share price of Telge Projects?

Ans. Telge Projects was trading at Rs 235.00 on the BSE as of 21 October 2026, and its 52-week range runs from Rs 77.05 to Rs 283.95. That leaves the share price 17 percent short of the 52-week high and 3.0 times the 52-week low. Its market capitalisation is Rs 230 Cr and its EPS (TTM) is Rs 8.21, which is the earnings figure behind the 28.62x P/E. Share prices change through the trading day, so check the live quote on Univest before acting on any number here.

What sector does Telge Projects belong to?

Ans. Telge Projects is classified under the Engineering Design and BIM Services sector on Univest, and that group of listed companies is the reference point for the 22.72x Industry P/E used in this article. The 2 named peers compared here are Tata Elxsi and Cyient, chosen as comparable listed names so that the P/E, ROE and debt figures come from the same live data source. Investors who want a wider view can compare more Engineering Design and BIM Services sector stocks on the Univest Screener, since no two companies in a sector have exactly the same business mix.

How does Telge Projects compare to its sector peers on P/E?

Ans. Telge Projects' P/E of 28.62x is below the 32.53x average of the 2 named peers, with Tata Elxsi at 33.61x and Cyient at 31.46x. It also sits above the 22.72x Industry P/E, which is the benchmark for the wider Engineering Design and BIM Services sector. A P/E that is below a peer average can reflect a valuation discount or premium, but it can also reflect different growth or return expectations, so it should be read alongside ROE and debt. Its P/B ratio of 5.19 gives one more view of how the market values its book value.

What is Telge Projects' return on equity?

Ans. Telge Projects reported a return on equity of 17.22%, which is above the 16.61% average of its named peers, with Tata Elxsi at 24.73% and Cyient at 8.48%. ROE shows how much profit a company generates on every rupee of shareholders' equity, so a higher figure generally points to more efficient use of capital. ROE is easier to trust when leverage is modest, and here the debt to equity ratio is 0.18 against a peer average of 0.07. It is worth checking whether the ROE has been stable over several years rather than relying on a single reading.

Should I invest in Telge Projects based on its sector position?

Ans. Sector position is only one input into an investment decision. Telge Projects has a 17.22% ROE and a 28.62x P/E, which make it worth researching further, and its dividend yield is 0.00%. You should also weigh its business outlook, earnings consistency, debt levels, your investment horizon and your own risk appetite before buying. Spreading money across several stocks and sectors reduces concentration risk, and this article is educational content, not investment advice. For personalised guidance, consult a SEBI-registered advisor.