Precision Camshafts Share Price Target 2027: Rs 120 Base, Rs 146 Bull and the Risks to Watch

Investors weighing a Precision Camshafts target price for 2027 should start with where the stock sits today. At Rs 106.17 on 13 November 2026, it is 45.3% below its 52-week high of Rs 193.95 and 19.4% above its 52-week low of Rs 88.92. That range spans 118% from low to high, so the entry point matters as much as the Precision Camshafts price forecast itself.

This article builds the Precision Camshafts share price target from reported numbers only: five years of annual results, the last five quarters, the latest shareholding pattern and current valuation ratios from company filings and exchange data. Each scenario states its assumptions, so you can trace how the base case, the bull case and the downside risk level were reached and test them against your own view.

Click Here – Get Free Investment Predictions

Precision Camshafts Stock Analysis: Company Overview and Key Stats

Precision Camshafts (NSE: PRECAM) has a market capitalisation of Rs 1,015 crore. In FY26 it reported revenue of Rs 824.72 crore and net profit of Rs 51.25 crore. The table collects the figures the Precision Camshafts share price target is built on.

Metric	Value
Company	Precision Camshafts
NSE Ticker	PRECAM
CMP (13 November 2026)	Rs 106.17
52-Week High	Rs 193.95
52-Week Low	Rs 88.92
Market Cap	Rs 1,015 crore
PE Ratio (TTM)	24.96
Industry PE	37.59
Price to Book	1.20
Return on Equity	4.13%
Debt to Equity	0.09
EPS (TTM)	Rs 4.28
Dividend Yield	0.94%
12-Month Base Target	Rs 120
Bull Case	Rs 146
Downside Risk Level (not a target)	Rs 85.5

Why Is Precision Camshafts Share Price Target Set at Rs 120 for 2027?

The arithmetic is short. Trailing EPS of Rs 4.28 grown for one year gives a forward EPS estimate of Rs 4.82, and multiplying it by the unchanged PE of 24.96 gives the Rs 120 base-case Precision Camshafts stock target. The bull case adds faster earnings growth and a higher multiple, while the downside risk level assumes flat earnings and a lower multiple.

Earnings Growth Behind the Precision Camshafts Target Price: Five Years of Results

Precision Camshafts grew revenue from Rs 913.95 crore in FY22 to Rs 824.72 crore in FY26, a compound annual growth rate of -2.5%. Net profit grew faster, from Rs 46.02 crore to Rs 51.25 crore (2.7% a year), which shows margin gains did part of the work and not just higher sales.

Financial Year	Revenue (Rs Cr)	Net Profit (Rs Cr)	EPS (Rs)	Dividend per Share (Rs)
FY22	913.95	46.02	4.85	1.10
FY23	1,113.27	46.29	4.87	1.00
FY24	1,062.74	40.35	4.25	1.00
FY25	898.21	54.11	5.70	1.00
FY26	824.72	51.25	5.40	1.00

FY26 revenue growth was -8.2%, slower than the four-year average of -2.5%, and net profit moved down 5.3%. EPS rose from Rs 4.25 in FY24 to Rs 5.40 in FY26. The FY27 outlook for the Precision Camshafts price target depends on whether that EPS estimate keeps compounding.

Margins and the Latest Quarter

Precision Camshafts converted 6.2% of FY26 revenue into net profit, against 6.0% in FY25, within a five-year range of 3.8% to 6.2%. EBITDA margin was 15.9% in FY26 versus 16.6% in FY25.

In the September 2026 quarter, revenue was Rs 221.42 crore, up 6.5% from the same quarter a year earlier, while net profit of Rs 12.93 crore was down 1.7%. EBITDA came in at Rs 25.75 crore, up 12.3% year on year. The next quarterly result is the first test of whether the earnings assumption behind the Precision Camshafts stock target holds.

Balance Sheet and Cash Flow

Debt to equity stands at 0.09, and shareholders' equity grew from Rs 681.65 crore in FY22 to Rs 835.62 crore in FY26. Operating cash flow in FY26 was Rs 120.08 crore against capital expenditure of Rs 78.02 crore, leaving free cash flow of Rs 42.06 crore, or 4.1% of the current market capitalisation. In FY25 free cash flow was Rs 89.43 crore.

Valuation Check for the Precision Camshafts Stock Target: PE, Price to Book and ROE

At a PE of 24.96 against an industry PE of 37.59, Precision Camshafts trades at a discount to its industry. Price to book is 1.20 on a book value of Rs 89.36 per share, and return on equity is 4.13%. A PE of 24.96 equals an earnings yield of 4.0%, and the FY26 dividend of Rs 1.00 per share gives a yield of 0.94%.

Shareholding Pattern and Institutional Holding

Promoters held 65.37% of Precision Camshafts in September 2026, and promoter holding has stayed near 65.37% since September 2025. Foreign institutional investors (FII) held 0.17% and domestic institutions (DII) held 0.00%, which puts total institutional holding at 0.17%. FII holding has stayed near 0.17% since September 2025. Public shareholders own the remaining 34.46%. Institutional holding this low means the stock sees limited professional coverage, and price moves can be sharper when trading volumes are thin.

Precision Camshafts Share Price Targets for the Short Term and 12 Months

Short Term Precision Camshafts Stock Target Levels: Technical Setup

At Rs 106.17 on 13 November 2026, Precision Camshafts trades below its 50-day simple moving average of Rs 110.37 and below its 200-day exponential moving average of Rs 136.04. The 14-day RSI reads 65.0, which is neutral territory, and the MACD line sits above its signal line. The nearest resistance level is Rs 110.37 (50-day simple moving average) and the nearest support is Rs 88.92 (52-week low). A sustained move above Rs 110.37 would improve the short-term setup, while a close below Rs 88.92 would shift attention to the next support.

12 Month Precision Camshafts Target Price for 2027

The 12-month target of Rs 120 means a move of 13.0% up from Rs 106.17 over the next 12 months. It would still leave the stock 38.1% below its 52-week high of Rs 193.95. Anyone checking the Precision Camshafts share price target against their own view should focus on two inputs: the EPS estimate and the PE multiple.

How EPS Growth and PE Multiple Change the Precision Camshafts Target Price

EPS Growth	PE 19.97	PE 24.96	PE 28.70
0.0% (EPS Rs 4.28)	Rs 85.5	Rs 107	Rs 123
12.7% (EPS Rs 4.82)	Rs 96.3	Rs 120	Rs 138
18.7% (EPS Rs 5.08)	Rs 101	Rs 127	Rs 146

Each cell multiplies the forward EPS estimate by the PE shown. Reading across a row shows what a de-rating or re-rating does to the Precision Camshafts price forecast, and reading down a column shows what earnings growth is worth at a fixed multiple.

Bull Case and Downside Risk for Precision Camshafts Stock Target in 2027

Bull Case Rs 146

The bull case Precision Camshafts price target needs EPS growth of 18.7%, which lifts forward EPS to Rs 5.08, and a PE multiple that rises 15% to 28.70. That gives Rs 146, 37.5% above the current price and below the 52-week high of Rs 193.95.

Downside Risk Level Rs 85.5

The downside risk level is not a target. It assumes EPS stays flat at Rs 4.28 and the PE falls 20% to 19.97. That gives Rs 85.5, 19.5% below the current price and below the 52-week low of Rs 88.92.

Scenario	EPS Growth	PE Multiple	Price (Rs)	Change vs CMP
Bull Case	18.7%	28.70	Rs 146	+37.5%
Base Case	12.7%	24.96	Rs 120	+13.0%
Downside Risk	0.0%	19.97	Rs 85.5	-19.5%

Key Risks to the Precision Camshafts Target Price for 2027

Growth Slowdown Risk for the Precision Camshafts Price Target

Revenue in the September 2026 quarter was up 6.5% year on year, and FY26 revenue growth was -8.2%. If growth slows from here, the EPS estimate behind the Precision Camshafts stock target will need revising.

Liquidity and Size Risk

Precision Camshafts has a market capitalisation of Rs 1,015 crore. Institutional holding is 0.17%, and promoters hold 65.37%. Stocks of this size can move sharply on small volumes, and exits can take longer than entries.

Valuation and Margin Risk

Net margin was 6.2% in FY26, so a small slip in costs moves profit noticeably. At a PE of 24.96 versus an industry PE of 37.59, a de-rating toward the downside-risk PE of 19.97 would cut the price even if earnings hold.

Market and Technical Risk

Technical indicators add short-term risk: the 14-day RSI is 65.0 and the MACD sits above its signal line. A broad fall in the Nifty 50 or the Sensex can override company fundamentals for weeks at a time. Treat every Precision Camshafts share price target as a range of outcomes rather than a single point.

How to Invest in Precision Camshafts

Start with the live price and volume. Any Precision Camshafts share price target is only as current as the data behind it, and the data here is as of 13 November 2026, so refresh the Rs 106.17 price before acting on any level.

Next, review the fundamentals yourself. The Univest Screener lets you check Precision Camshafts' PE, ROE, debt and shareholding in one place.

Check Precision Camshafts fundamentals on the Univest Screener

Then compare the three Precision Camshafts target price scenarios with your own view. If you expect EPS growth below 12.7%, the base case is too optimistic for you; if you expect more, the bull case deserves weight.

Decide your position size and exit levels before you buy. The support and resistance levels above can serve as reference points, but they are not recommendations.

Finally, place the order through a SEBI-registered broker or the Univest app, and review the position after each quarterly result. Consult a SEBI-registered advisor if you are unsure.

Download the Univest iOS App or Univest Android App to track Precision Camshafts live price and get daily stock recommendations.

Conclusion

The Precision Camshafts share price target for 2027 is Rs 120 in the base case, with Rs 146 as the bull case. The support for that view is arithmetic you can check: EPS grew 12.7% a year over FY24 to FY26, and the stock trades at a PE of 24.96. The risks are equally concrete, including a net margin of just 6.2% that leaves profit sensitive to costs and a downside scenario that cuts the price 19% if earnings stall. Use these numbers as a framework for judging the Precision Camshafts price target, check them against the latest filings, and size any position to your own risk appetite.

FAQs on Precision Camshafts Share Price Target 2027

What is the Precision Camshafts share price target for 2027?

Ans. The base-case Precision Camshafts share price target for 2027 is Rs 120, which is 13.0% above the price of Rs 106.17 on 13 November 2026. The bull case is Rs 146 and the downside risk level, which is not a target, is Rs 85.5. All three come from one method: forward EPS multiplied by a PE multiple, using only reported results. They are model estimates and not guaranteed outcomes, and the next quarterly result is the first check on the EPS assumption.

What is the Precision Camshafts share price today?

Ans. As of 13 November 2026, 9:21 AM IST, Precision Camshafts (NSE: PRECAM) trades at Rs 106.17, down 0.93% on the day. That is 45.3% below the 52-week high of Rs 193.95 and 19.4% above the 52-week low of Rs 88.92. The market capitalisation of Rs 1,015 crore places it among small-cap stocks. Prices change through the trading session, so check the live quote before acting on any level in this article.

Is Precision Camshafts a buy or sell at the current price?

Ans. The data points both ways. On the positive side, EPS has grown 12.7% a year over FY24 to FY26 and the base case implies 13.0% upside; on the cautious side, the net margin is a thin 6.2%, and the downside risk level of Rs 85.5 is 19% below the current price. Whether Precision Camshafts fits your portfolio depends on your time horizon, position size and risk appetite. Consult a SEBI-registered advisor before investing, as this article is not investment advice.

What are the bull case target and downside risk level for Precision Camshafts shares?

Ans. The bull case in the Precision Camshafts share price target for 2027 is Rs 146, which assumes 18.7% EPS growth and a PE of 28.70, a 15% re-rating from today's multiple. That is 37.5% above the current price and below the 52-week high of Rs 193.95. The downside risk level is Rs 85.5, which assumes flat EPS and a PE of 19.97, 20% lower than today. It sits 19.5% below the current price and below the 52-week low of Rs 88.92, and it marks a risk to watch, not a target.

What are the main risks to the Precision Camshafts price target?

Ans. Four risks matter most for the Precision Camshafts share price target: slower revenue or profit growth, a PE de-rating, thin liquidity or size risk, and weakness in the broader market. With a market capitalisation of Rs 1,015 crore, the stock can move sharply on small volumes, and exits can take longer than entries. A fall to the downside-risk PE of 19.97 would cut the price even if earnings hold.

What is the PE ratio of Precision Camshafts and how does it compare with the industry?

Ans. The PE ratio of Precision Camshafts is 24.96, against an industry PE of 37.59, which is a discount to the industry. Price to book is 1.20 and return on equity is 4.13%, and the PE equals an earnings yield of 4.0%. The base case holds the PE unchanged, so the Precision Camshafts share price target moves only with earnings, while the bull and downside scenarios change the multiple by +15% and -20%.

Who owns Precision Camshafts, and what is the promoter holding?

Ans. Promoters held 65.37% of Precision Camshafts in September 2026. FII held 0.17%, DII held 0.00% and the public held 34.46%. Together the two institutional groups hold 0.17%. Shareholding is filed every quarter, so it is worth rechecking after each result.

What were Precision Camshafts' latest quarterly results?

Ans. In the September 2026 quarter, Precision Camshafts reported revenue of Rs 221.42 crore (up 6.5% year on year) and net profit of Rs 12.93 crore (down 1.7%). For comparison, FY26 full-year revenue growth was -8.2% and net profit moved down 5.3%. Each new quarter either supports or weakens the EPS growth of 12.7% assumed in the base case.