
MIS vs CNC vs NRML: What Each Order Product Type Means, How Margin and Square Off Differ and Which One to Choose
MIS = intraday, squared off by the broker before close. CNC = cash and carry, for delivery of shares. NRML = normal, for carrying F&O positions overnight. Margin and costs differ for each.
Updated: 16 Nov 2026 • 10:24 am
Posted by:

Quick Answer
MIS vs CNC vs NRML is about how long you plan to hold and how much margin you need. MIS is for intraday trades and is squared off automatically before the market closes. CNC is for delivery, where shares come to your demat account and you pay the full amount. NRML is the normal product for derivatives that you may carry overnight, with full margin.
MIS vs CNC vs NRML is a question every new trader meets on the order screen, and picking the wrong product type can mean an unwanted auto square off, a surprise charge or a trade that cannot be carried forward.
This guide explains what each product type means, how margin and square off differ and how to choose between them.
Click Here – Get Free Investment Predictions
What Are Product Types?
When you place an order, your broker asks for a product type. It tells the broker how long you intend to hold and how much margin to block. The names vary slightly between brokers, but MIS, CNC and NRML are used by most platforms in India.
MIS: Margin Intraday Square Off
MIS is for intraday trades in shares and F&O. Your broker gives you extra buying power against your margin, so you can take a position larger than your cash balance. The condition is that you must close the position the same day. If you do not, the broker squares it off automatically a few minutes before the market closes, and the time varies by broker.
- Lower margin requirement than delivery.
- Auto square off before close, often with an extra charge.
- Orders may be blocked in the last minutes of the session.
- Brokerage is usually lower or flat for intraday trades.
CNC: Cash and Carry
CNC is for equity delivery. You pay the full value of the shares, they are credited to your demat account after settlement and you can hold them for as long as you like. There is no auto square off. If you sell the same day you buy, the trade is treated as an intraday trade for tax purposes, even under CNC.
NRML: Normal
NRML is for F&O positions you want to carry beyond the day. You pay the full exchange margin, which is higher than the MIS margin. There is no auto square off, but the position closes at expiry, and stock derivatives may lead to physical delivery of shares.
Use the Univest Screener to check live fundamentals before you act on any idea.
MIS vs CNC vs NRML Compared
| Feature | MIS | CNC | NRML |
|---|---|---|---|
| Used for | Intraday shares and F&O | Delivery shares | F&O carried overnight |
| Margin | Lowest | Full payment | Full exchange margin |
| Auto square off | Yes, before close | No | No, until expiry |
| Holding period | Same day | Any | Until expiry |
Which One Should You Choose?
- Pick CNC to buy shares you plan to hold for days, months or years.
- Pick MIS only if you will close the trade the same day and can accept the auto square off.
- Pick NRML for F&O positions that you intend to hold overnight.
- If you are unsure, choose the product that matches your holding plan, not the one that needs the least money.
The Sensex and Nifty move fastest at the open and close, so intraday traders using MIS should watch the square off time closely. A trade that is stuck in a loss at the auto square off turns into a realised loss at the worst moment.
Common Mistakes
The most common mistake is placing an MIS order and forgetting to close it, which leads to a forced square off at an unfavourable price and a penalty. Another is using CNC for a quick intraday trade and expecting extra margin. Beginners also forget that MIS gives higher exposure than their cash, which magnifies losses. Check your broker's rules for exact timings and charges, since they differ.
A MIS order carries the risk of a forced exit, a CNC order carries the need for full payment and a NRML order carries the need for full margin and the cost of carry forward. A MIS order should be treated as a same day plan. A CNC order suits an investor with a longer view. A NRML order suits a trader with a defined expiry plan. Each MIS order, CNC order or NRML order also has different brokerage and T+1 settlement treatment for shares, so read your broker's charges before placing it. The MIS order auto square off time and the penalty vary by broker. Check the square off time for every MIS order and decide before the last half hour whether to close the position. Before you place a CNC order, make sure the funds are available, and before you place a NRML order, check the margin and the expiry date. The right order type is the one that matches your plan. Doing this check for each MIS order, CNC order and NRML order removes a common source of costly errors.
Download the Univest iOS App or Univest Android App to get daily stock research and market updates.
Conclusion
MIS is for same day trades with lower margin and an automatic square off, CNC is for delivery and NRML is for carrying derivatives. The right choice depends on how long you plan to hold.
Match the product to your plan, know your broker's square off time and avoid using MIS as a way to trade beyond your means.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Frequently Asked Questions
What does MIS mean in trading?
Ans. MIS stands for Margin Intraday Square Off. It is a product type for intraday trades, with lower margin than delivery, and the broker closes the position automatically before the market ends if you have not.
What does CNC mean in trading?
Ans. CNC stands for Cash and Carry. It is used to buy shares for delivery. You pay the full amount, the shares are credited to your demat account and you can hold them as long as you wish.
What does NRML mean in trading?
Ans. NRML stands for Normal. It is the product type used for F&O trades that you want to carry overnight. It needs the full exchange margin and does not square off automatically before the day ends.
Can I convert an MIS order to CNC?
Ans. Many brokers allow conversion of an open intraday position to delivery, if you have enough funds to pay the full amount. Check the cut off time and any charges with your broker.
What happens if I do not close an MIS position?
Ans. The broker squares it off automatically shortly before the market closes. You may have to pay an extra charge, and the exit price may not be favourable, so plan to close your own trades.
Is MIS lower cost than CNC?
Ans. MIS needs less margin, and brokerage is often lower for intraday trades. But the risk is higher because the position is larger than your cash, so lower margin does not mean a safer or lower cost trade.
Which product type is best for long term investing?
Ans. CNC is best, because you pay in full, the shares come to your demat account and there is no forced square off. It suits investors who want to hold shares for months or years.
Recent Articles

Markolines Pavement Technologies Share Price Target 2027: 16.0% Upside to Rs 187
16 November 2026

Hindustan Foods Share Price Target 2027: Can It Reach Rs 779? Base Case at Rs 650
16 November 2026

Goldiam International Share Price Target 2027: 20.2% Upside to Rs 375, Bull Case Rs 449
16 November 2026

GNFC Share Price Target 2027: What Earnings Say About Rs 564 and Rs 675
16 November 2026
Note: This blog is for information purpose only. Investments and trading are subject to market risks, read all scheme related documents carefully.
Reviews
Recent Posts
Markolines Pavement Technologies Share Price Target 2027: 16.0% Upside to Rs 187
Hindustan Foods Share Price Target 2027: Can It Reach Rs 779? Base Case at Rs 650
Goldiam International Share Price Target 2027: 20.2% Upside to Rs 375, Bull Case Rs 449
GNFC Share Price Target 2027: What Earnings Say About Rs 564 and Rs 675
Great Eastern Shipping Share Price Target 2027: 8.7% Upside to Rs 1,611, Bull Rs 1,957
Popular this week
GeeCee Ventures Share Price Target 2027: Is Rs 387 Realistic? Bull Case Points to Rs 470

Uniresearch Global Pvt Ltd
Research Analyst
SEBI Registration Number — INH000013776
Uniresearch is a subsidiary of Univest Communication Technologies Private Limited
Company Address: Registered Address: Ground Floor, Unitech Commercial Tower 2, Block B, Greenwood City, Unit 1-3, Sector 45, Gurugram, Haryana 122003
Write to us : support@univest.in, compliance@univest.in
Verify on SEBI registry →RESEARCH ANALYST
Get SEBI Registered
advice on the stocks
trending today.
Get 3 FREE Trade Ideas
for Startups Accelerator 2024
Trusted by 1Cr Indians
Awarded No.1 by Economic Times





