Is BD Industries (Pune) the Best Stock in Its Sector? A Look at the Numbers

Is BD Industries (Pune) the best stock in its sector? The stock trades on the BSE at Rs 120 as of 22 October 2026, within its 52-week range of Rs 98.00 to Rs 123.00. The sections below cover the business, the key ratios, a peer comparison and a closer look at valuation.

Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers

Click Here – Get Free Investment Predictions

About BD Industries (Pune)

B. D. Industries (Pune) Ltd manufactures and trades plastic fuel tanks and related products, and company information says it was incorporated in 1984. Company information says it began with repair and manufacture of traction batteries, later moved into plastic container boxes using roto-moulding technology, and, after acquiring Toyo Containers, makes rotomoulded battery boxes and water tanks, with plastic components for automotive and industrial users. At a market capitalisation of Rs 170 Cr, it is tracked as part of the Rotomoulded Plastic Products sector on Univest.

Is BD Industries (Pune) the Best Stock in Its Sector?

BD Industries (Pune) makes its case as the best stock in its sector primarily on valuation relative to its Industry P/E, backed by its return on equity. BD Industries (Pune)'s 17.82x P/E is below the 36.44x Industry P/E, Supreme Industries at 43.68x and Nilkamal at 20.51x, while its 13.33% ROE is lower than Supreme Industries at 15.46%, though higher than Nilkamal at 8.05%, and its debt to equity ratio of 0.24 is below Nilkamal at 0.27, though above Supreme Industries at 0.01.

Metric	BD Industries (Pune)
CMP (BSE)	Rs 119.75
52-Week High / Low	Rs 123.00 / Rs 98.00
Market Cap	Rs 170 Cr
P/E (TTM) vs Industry P/E	17.82x vs 36.44x
P/B	2.37
ROE	13.33%
EPS (TTM)	Rs 6.72
Dividend Yield	0.00%
Debt to Equity	0.24

Compare BD Industries (Pune) Against Other Rotomoulded Plastic Products Sector Stocks

How BD Industries (Pune) Compares Against Its Rotomoulded Plastic Products Sector Peers

The table below sets BD Industries (Pune) against 2 other Rotomoulded Plastic Products sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.

Company	Market Cap (Rs Cr)	P/E	ROE	Debt to Equity
BD Industries (Pune)	170	17.82	13.33%	0.24
Supreme Industries	45,095	43.68	15.46%	0.01
Nilkamal	2,566	20.51	8.05%	0.27
Peer average (2 companies)	-	32.09	11.76%	0.14

Measured against the peer averages, BD Industries (Pune)'s P/E is 44 percent below the 32.09x average, and its ROE is 1.57 percentage points above the 11.76% average. An average of just two companies is a rough guide, so treat the gap as a pointer for further research and not as a verdict.

What Makes BD Industries (Pune) Worth Watching in Rotomoulded Plastic Products

• Scale: At Rs 170 Cr, its market capitalisation is smaller than Supreme Industries (Rs 45,095 Cr) and Nilkamal (Rs 2,566 Cr), which is a useful reminder that the peers differ in size as well as in valuation.
• Sector drivers: Orders from automotive and industrial customers, demand for tanks and containers and the cost of polymer raw materials drive revenue and margins.
• Key risk: Plastic product makers feel polymer price swings quickly, and customers can push back on pricing. Concentration in a few end markets adds to cyclicality.

BD Industries (Pune) Valuation: Is It Justified?

At a P/B ratio of 2.37, the market pays about Rs 2.37 for every rupee of book value, and the EPS (TTM) of Rs 6.72 is the earnings base behind the P/E. The stock trades about 3 percent below its 52-week high and about 22 percent above its 52-week low. The company does not currently show a dividend yield, so returns for shareholders depend mainly on the share price. As with any single stock, investors should weigh these figures against their own valuation discipline and risk appetite rather than the sector label alone.

Also read – Is Oracle Financial Services Software the Best Stock in Its Sector? A Look at the Numbers

Download the Univest iOS App or Univest Android App to track BD Industries (Pune) and other Rotomoulded Plastic Products sector stocks.

How to Track BD Industries (Pune) Before You Invest

Before deciding whether BD Industries (Pune) deserves its label as the best stock in its sector for your own portfolio, compare it directly against Rotomoulded Plastic Products sector peers using the steps below.

1. Open the Univest Screener and search for BD Industries (Pune) to view live price, valuation ratios, and peer comparisons within the Rotomoulded Plastic Products sector.
2. Compare its P/E, P/B, and ROE against other Rotomoulded Plastic Products sector stocks before deciding if the current valuation fits your strategy.
3. Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
4. Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.

Conclusion

BD Industries (Pune) gives investors a clear set of numbers to work with, from returns and valuation to leverage and peer standing. Whether it earns the label of best stock in Rotomoulded Plastic Products depends on how much weight you give each of them and on how the business executes from here. Because the stock trades below its sector benchmark, the open question is whether earnings growth will close that gap or whether the discount is deserved. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.

Is BD Industries (Pune) the best stock in its sector?

Ans. There is no single definitive answer, because the best stock in a sector depends on whether an investor is prioritising returns, valuation or balance sheet strength. BD Industries (Pune) has a 13.33% ROE and trades at 17.82x P/E against a 36.44x Industry P/E. Against the 2 peers compared in this article, its ROE is above the 11.76% peer average and its P/E is below the 32.09x peer average. Its debt to equity ratio of 0.24 is above the 0.14 peer average, which matters because borrowing can inflate returns and add risk when business conditions weaken. These figures are best read together rather than in isolation, and they work as a starting point for your own research and not as a verdict.

What is the current share price of BD Industries (Pune)?

Ans. BD Industries (Pune) was trading at Rs 119.75 on the BSE as of 22 October 2026, and its 52-week range runs from Rs 98.00 to Rs 123.00. That leaves the share price 3 percent short of the 52-week high and 22 percent clear of the 52-week low. Its market capitalisation is Rs 170 Cr and its EPS (TTM) is Rs 6.72, which is the earnings figure behind the 17.82x P/E. Share prices change through the trading day, so check the live quote on Univest before acting on any number here.

What sector does BD Industries (Pune) belong to?

Ans. BD Industries (Pune) is classified under the Rotomoulded Plastic Products sector on Univest, and that group of listed companies is the reference point for the 36.44x Industry P/E used in this article. The 2 named peers compared here are Supreme Industries and Nilkamal, chosen as comparable listed names so that the P/E, ROE and debt figures come from the same live data source. Investors who want a wider view can compare more Rotomoulded Plastic Products sector stocks on the Univest Screener, since no two companies in a sector have exactly the same business mix.

How does BD Industries (Pune) compare to its sector peers on P/E?

Ans. BD Industries (Pune)'s P/E of 17.82x is below the 32.09x average of the 2 named peers, with Supreme Industries at 43.68x and Nilkamal at 20.51x. It also sits below the 36.44x Industry P/E, which is the benchmark for the wider Rotomoulded Plastic Products sector. A P/E that is below a peer average can reflect a valuation discount or premium, but it can also reflect different growth or return expectations, so it should be read alongside ROE and debt. Its P/B ratio of 2.37 gives one more view of how the market values its book value.

What is BD Industries (Pune)'s return on equity?

Ans. BD Industries (Pune) reported a return on equity of 13.33%, which is above the 11.76% average of its named peers, with Supreme Industries at 15.46% and Nilkamal at 8.05%. ROE shows how much profit a company generates on every rupee of shareholders' equity, so a higher figure generally points to more efficient use of capital. ROE is easier to trust when leverage is modest, and here the debt to equity ratio is 0.24 against a peer average of 0.14. It is worth checking whether the ROE has been stable over several years rather than relying on a single reading.

Should I invest in BD Industries (Pune) based on its sector position?

Ans. Sector position is only one input into an investment decision. BD Industries (Pune) has a 13.33% ROE and a 17.82x P/E, which make it worth researching further, and its dividend yield is 0.00%. You should also weigh its business outlook, earnings consistency, debt levels, your investment horizon and your own risk appetite before buying. Spreading money across several stocks and sectors reduces concentration risk, and this article is educational content, not investment advice. For personalised guidance, consult a SEBI-registered advisor.