Is Aesthetik Engineers the Best Stock in Its Sector? A Look at the Numbers

Is Aesthetik Engineers the best stock in its sector? The stock trades on the NSE at Rs 71.00 as of 22 October 2026, within its 52-week range of Rs 59.60 to Rs 119.00. The sections below cover the business, the key ratios, a peer comparison and a closer look at valuation.

Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers

Click Here – Get Free Investment Predictions

About Aesthetik Engineers

Aesthetik Engineers Ltd designs, engineers, fabricates and installs facade systems, and company information says it was incorporated in 2008. Company information says it serves hospitality, residential, commercial and infrastructure projects. At a market capitalisation of Rs 122 Cr, it is tracked as part of the Facade Engineering sector on Univest.

Is Aesthetik Engineers the Best Stock in Its Sector?

Aesthetik Engineers makes its case as the best stock in its sector primarily on valuation relative to its Industry P/E, backed by its return on equity. Aesthetik Engineers' 17.15x P/E is below the 22.67x Industry P/E and Cemindia Projects at 33.00x, though above KNR Constructions at 7.97x, while its 14.19% ROE is lower than Cemindia Projects at 24.91%, though higher than KNR Constructions at 8.79%, and its debt to equity ratio of 0.50 is above Cemindia Projects at 0.38 and KNR Constructions at 0.49.

Metric	Aesthetik Engineers
CMP (NSE)	Rs 71.00
52-Week High / Low	Rs 119.00 / Rs 59.60
Market Cap	Rs 122 Cr
P/E (TTM) vs Industry P/E	17.15x vs 22.67x
P/B	2.43
ROE	14.19%
EPS (TTM)	Rs 4.14
Dividend Yield	0.00%
Debt to Equity	0.50

Compare Aesthetik Engineers Against Other Facade Engineering Sector Stocks

How Aesthetik Engineers Compares Against Its Facade Engineering Sector Peers

The table below sets Aesthetik Engineers against 2 other Facade Engineering sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.

Company	Market Cap (Rs Cr)	P/E	ROE	Debt to Equity
Aesthetik Engineers	122	17.15	14.19%	0.50
Cemindia Projects	19,854	33.00	24.91%	0.38
KNR Constructions	3,141	7.97	8.79%	0.49
Peer average (2 companies)	-	20.48	16.85%	0.43

Measured against the peer averages, Aesthetik Engineers' P/E is 16 percent below the 20.48x average, and its ROE is 2.66 percentage points below the 16.85% average. An average of just two companies is a rough guide, so treat the gap as a pointer for further research and not as a verdict.

What Makes Aesthetik Engineers Worth Watching in Facade Engineering

• Scale: At Rs 122 Cr, its market capitalisation is smaller than Cemindia Projects (Rs 19,854 Cr) and KNR Constructions (Rs 3,141 Cr), which is a useful reminder that the peers differ in size as well as in valuation.
• Sector drivers: Commercial and hospitality construction activity and its order book execution drive revenue and margins.
• Key risk: Facade work is project based and tied to the construction cycle, so order timing can make results uneven. Metal and glass costs can affect margins, and trading volumes are small.

Aesthetik Engineers Valuation: Is It Justified?

At a P/B ratio of 2.43, the market pays about Rs 2.43 for every rupee of book value, and the EPS (TTM) of Rs 4.14 is the earnings base behind the P/E. The stock trades about 40 percent below its 52-week high and about 19 percent above its 52-week low. The company does not currently show a dividend yield, so returns for shareholders depend mainly on the share price. As with any single stock, investors should weigh these figures against their own valuation discipline and risk appetite rather than the sector label alone.

Also read – Is Oracle Financial Services Software the Best Stock in Its Sector? A Look at the Numbers

Download the Univest iOS App or Univest Android App to track Aesthetik Engineers and other Facade Engineering sector stocks.

How to Track Aesthetik Engineers Before You Invest

Before deciding whether Aesthetik Engineers deserves its label as the best stock in its sector for your own portfolio, compare it directly against Facade Engineering sector peers using the steps below.

1. Open the Univest Screener and search for Aesthetik Engineers to view live price, valuation ratios, and peer comparisons within the Facade Engineering sector.
2. Compare its P/E, P/B, and ROE against other Facade Engineering sector stocks before deciding if the current valuation fits your strategy.
3. Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
4. Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.

Conclusion

Aesthetik Engineers gives investors a clear set of numbers to work with, from returns and valuation to leverage and peer standing. Whether it earns the label of best stock in Facade Engineering depends on how much weight you give each of them and on how the business executes from here. Because the stock trades below its sector benchmark, the open question is whether earnings growth will close that gap or whether the discount is deserved. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.

Is Aesthetik Engineers the best stock in its sector?

Ans. There is no single definitive answer, because the best stock in a sector depends on whether an investor is prioritising returns, valuation or balance sheet strength. Aesthetik Engineers has a 14.19% ROE and trades at 17.15x P/E against a 22.67x Industry P/E. Against the 2 peers compared in this article, its ROE is below the 16.85% peer average and its P/E is below the 20.48x peer average. Its debt to equity ratio of 0.50 is above the 0.43 peer average, which matters because borrowing can inflate returns and add risk when business conditions weaken. These figures are best read together rather than in isolation, and they work as a starting point for your own research and not as a verdict.

What is the current share price of Aesthetik Engineers?

Ans. Aesthetik Engineers was trading at Rs 71.00 on the NSE as of 22 October 2026, and its 52-week range runs from Rs 59.60 to Rs 119.00. That leaves the share price 40 percent short of the 52-week high and 19 percent clear of the 52-week low. Its market capitalisation is Rs 122 Cr and its EPS (TTM) is Rs 4.14, which is the earnings figure behind the 17.15x P/E. Share prices change through the trading day, so check the live quote on Univest before acting on any number here.

What sector does Aesthetik Engineers belong to?

Ans. Aesthetik Engineers is classified under the Facade Engineering sector on Univest, and that group of listed companies is the reference point for the 22.67x Industry P/E used in this article. The 2 named peers compared here are Cemindia Projects and KNR Constructions, chosen as comparable listed names so that the P/E, ROE and debt figures come from the same live data source. Investors who want a wider view can compare more Facade Engineering sector stocks on the Univest Screener, since no two companies in a sector have exactly the same business mix.

How does Aesthetik Engineers compare to its sector peers on P/E?

Ans. Aesthetik Engineers' P/E of 17.15x is below the 20.48x average of the 2 named peers, with Cemindia Projects at 33.00x and KNR Constructions at 7.97x. It also sits below the 22.67x Industry P/E, which is the benchmark for the wider Facade Engineering sector. A P/E that is below a peer average can reflect a valuation discount or premium, but it can also reflect different growth or return expectations, so it should be read alongside ROE and debt. Its P/B ratio of 2.43 gives one more view of how the market values its book value.

What is Aesthetik Engineers' return on equity?

Ans. Aesthetik Engineers reported a return on equity of 14.19%, which is below the 16.85% average of its named peers, with Cemindia Projects at 24.91% and KNR Constructions at 8.79%. ROE shows how much profit a company generates on every rupee of shareholders' equity, so a higher figure generally points to more efficient use of capital. ROE is easier to trust when leverage is modest, and here the debt to equity ratio is 0.50 against a peer average of 0.43. It is worth checking whether the ROE has been stable over several years rather than relying on a single reading.

Should I invest in Aesthetik Engineers based on its sector position?

Ans. Sector position is only one input into an investment decision. Aesthetik Engineers has a 14.19% ROE and a 17.15x P/E, which make it worth researching further, and its dividend yield is 0.00%. You should also weigh its business outlook, earnings consistency, debt levels, your investment horizon and your own risk appetite before buying. Spreading money across several stocks and sectors reduces concentration risk, and this article is educational content, not investment advice. For personalised guidance, consult a SEBI-registered advisor.