This Aero Tooling Stock Rises 42% in 1 Year: Tariff Shock, Then a Record Quarter

Aero tooling stock returns rarely swing this violently in twelve months. One Bengaluru maker of aeroengine and airframe tooling gained approximately 42% in the year to 17 September 2026, from Rs 1,106.10 to around Rs 1,571.70, after first collapsing to Rs 695 in March 2026.

The company is Unimech Aerospace and Manufacturing Ltd (NSE: UNIMECH), which builds tooling and assemblies used to make and service aircraft engines and airframes. The Unimech Aerospace share price has doubled from its March low, putting this aero tooling stock among the stronger names on a screen of NSE small-cap stocks ranked by 1-year return, dated 17 September 2026.

Click Here – Get Free Investment Predictions

How Much Has This Aero Tooling Stock Returned in 1 Year?

The verified 1-year return is approximately 42%, close to close from 17 September 2025 to 17 September 2026. This aero tooling stock closed at Rs 1,106.10 a year ago and traded near Rs 1,571.70 on 17 September 2026, up about 3.7% from the previous close of Rs 1,515.80.

The shorter windows tell the real story. Six months ago this aero tooling stock traded at Rs 778.80 and has roughly doubled since, while the last month was flat.

Period	From	To	Price Return
1 Month (17 Aug 2026)	Rs 1,511.30	Rs 1,571.70	4%
6 Months (17 Mar 2026)	Rs 778.80	Rs 1,571.70	102%
1 Year (17 Sep 2025)	Rs 1,106.10	Rs 1,571.70	42%
Since Listing (31 Dec 2024)	Rs 1,376.25	Rs 1,571.70	14%
Versus IPO Price	Rs 785.00	Rs 1,571.70	100%

There is no 3-year or 5-year record. This aero tooling stock listed on 31 December 2024, and no split or bonus has been issued since.

Why Did This Aero Tooling Stock Rise 42% in a Year?

Because a tariff shock that crushed FY26 earnings proved to be a timing problem, not a demand problem. Deferred orders returned from March 2026, and four dated events rebuilt the case for this aero tooling stock.

1. The Tariff Hit That Set the Low Base

On 3 October 2025 the company warned that US tariffs on aerospace exports would push Q2 FY26 revenue below Q1 levels and make full-year guidance difficult. This aero tooling stock fell 4.8% that day to Rs 989.80.

The damage landed in the December 2025 quarter: revenue of about Rs 34 crore at a 4.6% operating margin, against 31% two quarters earlier. The Unimech Aerospace share price bottomed at Rs 695 in the week ending 30 March 2026. With 89% of revenue exported, the market priced the tariff as permanent.

2. Rs 450 Crore Hobel Bellows Acquisition, April 2026

On 28 April 2026 the company confirmed an all-cash purchase of a 99.99% stake in Hobel Bellows for approximately Rs 450 crore, the largest deal by this aero tooling stock since listing. Hobel makes metallic bellows, exhaust manifolds and precision tubular assemblies in the Visakhapatnam special economic zone.

Hobel reported revenue of approximately Rs 129 crore for FY26 with EBITDA margins above 50% and a backlog near Rs 65 crore. Management said building that capability organically would have taken 18 to 24 months and roughly Rs 100 crore. It came from reserves, without fresh borrowing.

3. Q4 FY26 Results and an Order Book That Tripled

The March 2026 quarter broke the downtrend. Revenue rose about 20% year on year to Rs 82 crore, EBITDA reached Rs 35.2 crore at a 43.03% margin, and net profit recovered to Rs 26.1 crore from Rs 2.4 crore in December.

More important, the order book stood near Rs 314 crore as of 26 May 2026 against an average around Rs 100 crore the prior year, including roughly Rs 87 crore of nuclear orders. That is the first real diversification for this aero tooling stock.

4. A Long-Term Supply Deal With an Austrian Tier 1 Supplier

On 30 June 2026 the company announced a long-term supply agreement with FACC Operations GmbH of Austria for precision-engineered components and flying parts, won through competitive global sourcing. This aero tooling stock jumped about 9.7% that day to Rs 1,199.80 from Rs 1,092.85.

That pushes this aero tooling stock past ground support tooling into flying parts, which carry longer qualification cycles and stickier revenue. Production follows a qualification phase of several quarters, so the revenue is dated, not immediate.

Check the Univest Screener for Live Fundamentals of High-Return Stocks

5. Record Q1 FY27 Numbers and a Rs 750 Crore Fundraise Plan

Results on 3 August 2026 were the best this aero tooling stock has posted. Revenue from operations reached Rs 107.62 crore, up 70.9% year on year, EBITDA rose 98.3% to Rs 39.3 crore at a 36.5% margin, and profit after tax climbed 45.7% to Rs 27.9 crore. The board approved raising up to Rs 750 crore through a qualified institutional placement.

This aero tooling stock gained about 9% on 4 August 2026 to a 13-month high. Management guided for FY27 EBITDA margins of 34% to 35% against roughly 31% in FY26, committed to doubling gross block by end FY27, and put USD 10 million into a Saudi joint venture. The Unimech Aerospace share price ran from Rs 1,236 in late July to a record Rs 1,652.80 on 9 September 2026.

Financials Behind the Aero Tooling Stock

Quarterly earnings are lumpy, the most useful fact about this aero tooling stock. Revenue has swung between Rs 34 crore and Rs 107.62 crore across five quarters, and operating margin between 4.6% and 43%.

Quarter	Revenue (Rs Cr)	Operating Profit (Rs Cr)	OPM	Net Profit (Rs Cr)
Jun 2025 (Q1 FY26)	63	20	31%	19
Sep 2025 (Q2 FY26)	62	19	30%	16
Dec 2025 (Q3 FY26)	34	2	4.6%	2
Mar 2026 (Q4 FY26)	82	35	43%	26
Jun 2026 (Q1 FY27)	108	39	36.5%	28

FY26 as a whole was a step back for this aero tooling stock. Sales came in near Rs 240 crore against Rs 243 crore in FY25, operating profit fell to Rs 76 crore from Rs 92 crore, margin to 32% from 38%, and net profit to Rs 63 crore from Rs 83 crore.

One caveat matters. Other income was approximately Rs 46 crore in FY26 against Rs 25 crore in FY25, largely yield on unspent IPO money, so the operating business earned far less than reported profit suggests. Borrowings rose to Rs 127 crore from Rs 84 crore, and trailing profit growth is still negative at roughly minus 12%.

Who Owns This Aero Tooling Stock?

Promoters hold 79.82% of this aero tooling stock and have not sold a share since listing. The figure is unchanged across five quarters, leaving a free float of only about 20%.

Shareholder	Sep 2025	Dec 2025	Mar 2026	Jun 2026
Promoters	79.82%	79.82%	79.82%	79.82%
FIIs	0.21%	0.36%	0.38%	0.43%
DIIs	6.52%	6.50%	5.99%	5.59%
Public	13.45%	13.33%	13.82%	14.16%

Foreign institutional holding rose from 0.21% to 0.43%. Domestic institutions trimmed from 6.52% to 5.59% through the tariff-hit stretch. The proposed Rs 750 crore placement, if completed, brings institutions into this aero tooling stock at scale and dilutes existing holders.

Is This Aero Tooling Stock Expensive After a 42% Rally?

Yes, on every trailing measure. This aero tooling stock trades at a price to earnings ratio near 107 against an industry figure of about 47, and at roughly 10.5 times book value of Rs 144.87. Return on equity is only 8.58%, because the equity base is swollen by IPO proceeds not yet converted into earnings.

Debt to equity is comfortable at 0.17, market capitalisation approximately Rs 7,714 crore and trailing earnings per share Rs 14.15, with no dividend. Buyers are paying for margin guidance and an order book, not delivered earnings.

Key Risks in This Aero Tooling Stock

Valuation and earnings quality: A price to earnings ratio near 107 leaves this aero tooling stock no room for a weak quarter. Roughly Rs 46 crore of FY26 income came from other income rather than operations, so the operating base is thinner than the headline.

Export and client concentration: About 89% of revenue is exported across roughly 35 customers in seven countries. December 2025 showed how fast this aero tooling stock breaks when trade policy shifts, and nothing structural stops a repeat.

Liquidity and volatility: With promoters at 79.82%, the float is small and volatility runs near 3.6 times the Nifty. On 16 September 2026 the price swung between Rs 1,568.50 and Rs 1,430.10 intraday. Exiting a small-cap aero tooling stock at a chosen price is not assured.

Execution and integration: The company is integrating Hobel Bellows, funding a Saudi joint venture, doubling gross block by end FY27 and qualifying flying parts for a European customer at once. A slip pushes revenue out by quarters rather than weeks.

Short history and dilution: This aero tooling stock has traded under two years, so there is no full cycle to study, and the Rs 750 crore placement will dilute earnings per share. No promoter pledge, insolvency history, auditor qualification or surveillance action was found in the disclosures reviewed.

Download the Univest iOS App or Univest Android App to track the Unimech Aerospace share price live

Unimech Aerospace Share: Analyst View

Analyst coverage on this aero tooling stock is thin, normal under two years from listing. A domestic brokerage initiated coverage on 16 July 2026 with a buy rating, and the share rose 9% that day from Rs 1,258.30.

The bull case rests on aeroengine tooling, supplied around LEAP, Pratt and Whitney and Rolls Royce programmes, which made up roughly 80% of FY26 revenue. The note added global engine ramp-ups and a shift of maintenance work toward Asia.

What matters next for this aero tooling stock is whether the 36.5% Q1 margin holds through weaker middle quarters, whether the order book converts on time, and how the placement is priced.

Unimech Aerospace Share Price Target

The only verified Unimech Aerospace share price target on record is Rs 1,530, set on 16 July 2026 at 50 times estimated FY28 earnings per share. The share has already passed it, so that number now sits below the market and is stale rather than useful.

With no fresher number, the reference points for this aero tooling stock are traded levels: the record high of Rs 1,652.80 on 9 September 2026 as resistance, and the Rs 1,505 to Rs 1,515 zone as support.

Treat any published target on this aero tooling stock as an assumption about FY28 execution rather than a promise, and check when it was last revised.

Other Stocks to Track From the Same Return Screen

Beyond this aero tooling stock, a screen of NSE small-cap stocks ranked by 1-year return also includes related names such as Lumax Auto Technologies with a 1-year return of 76.42%, Centum Electronics at 63.36% and SPR Auto Technologies at 62.33%.

Among the names covered from that screen, MTAR Technologies returned 396.53% over one year. Readers can compare this aero tooling stock with the Nifty 50 benchmark and track each of these names on Univest before making any decision.

Conclusion

This aero tooling stock earned its 42% one-year return the hard way. It lost more than a third of its value on a tariff shock, bottomed at Rs 695 in March 2026, then rebuilt on a Rs 450 crore acquisition, a European flying-parts deal and a record June quarter.

The gap between that recovery and a price to earnings ratio of 107 is where the risk sits. The Unimech Aerospace share price already reflects FY28 expectations, and one tariff headline could reset it. For this aero tooling stock, quarterly margin and order book conversion matter more than the chart. Speak to a SEBI-registered adviser first.

Frequently Asked Questions

Which aero tooling stock rose 42% in one year?

Ans. Unimech Aerospace and Manufacturing Ltd (NSE: UNIMECH) is the aero tooling stock that gained approximately 42% between 17 September 2025 and 17 September 2026, from Rs 1,106.10 to around Rs 1,571.70.

Why did the Unimech Aerospace share price fall to Rs 695 in March 2026?

Ans. US tariffs on aerospace exports made customers defer orders, flagged on 3 October 2025. December quarter revenue dropped to Rs 34 crore at a 4.6% operating margin, and the selling that followed took the share to Rs 695.

What were the Q1 FY27 results of Unimech Aerospace?

Ans. Revenue from operations was Rs 107.62 crore in the June 2026 quarter, up 70.9% year on year and the highest since listing. EBITDA rose 98.3% to Rs 39.3 crore at a 36.5% margin, and profit after tax rose 45.7% to Rs 27.9 crore.

What is the order book of this aero tooling stock?

Ans. The consolidated order book stood at approximately Rs 314 crore as of 26 May 2026, close to three times the prior year average of about Rs 100 crore. Roughly Rs 87 crore was nuclear orders.

Is the Unimech Aerospace share price expensive right now?

Ans. On trailing numbers it is expensive, at a price to earnings ratio near 107 against an industry figure of about 47, and a price to book around 10.5. Return on equity is 8.58%, so it depends on FY27 and FY28 earnings arriving on time.

What is the Unimech Aerospace share price target?

Ans. The only verified Unimech Aerospace share price target on record is Rs 1,530, published by a domestic brokerage on 16 July 2026 at 50 times estimated FY28 earnings. The share has already crossed it and no newer target was found.

Has this aero tooling stock announced a stock split or bonus?

Ans. No stock split or bonus issue has been announced since listing on 31 December 2024. Face value remains Rs 5, so the 42% one-year return is pure price appreciation.

What are the biggest risks in this aero tooling stock?

Ans. The largest risks are a price to earnings ratio near 107, exports at about 89% of revenue, and thin liquidity because promoters hold 79.82%. Volatility runs near 3.6 times the Nifty, and a Rs 750 crore placement will dilute earnings.