National Fittings Ltd. (NATFIT): National Fittings Share Price Rises 9.02% as Micro Cap Stock Gains Today

National Fittings rose to Rs 185.50, up 9.02% today, taking its market capitalisation to Rs 154.55 crore and putting the micro-cap stock in focus.

National Fittings Share Price moved sharply higher on 19 August 2026, with the stock trading at Rs 185.50 at the time of this update, up Rs 15.35 or 9.02% from the previous close of Rs 170.15. With a market capitalisation of Rs 154.55 crore, National Fittings Ltd. has emerged as a notable micro-cap top gainer in today’s market action. The move is significant because the stock has cleared the qualifying bar for its market-cap category, making it relevant in Stock Market Today and Top Gainers Today screens.

The supplied data confirms the price rise, but it does not establish a company-specific catalyst behind the move. That distinction matters. In fast-moving Share Market Today conditions, a stock can trend because of price action, trading participation and screen-based momentum even when no verified company announcement is tied to the move. That appears to be the factual setup in this case.

National Fittings Share Price Today is also drawing attention because the session high of Rs 185.75 came very close to the last traded price of Rs 185.50, showing that much of the gain was retained into the observed time stamp. Investors tracking National Fittings Stock News will also note that the company trades in the Automobile & Ancillaries sector and the Castings/Forgings industry, where valuation and profitability comparisons provide useful context. In this Univest analysis, the key things to monitor next are whether turnover and volume stay supportive, how the current valuation compares with peers, and whether the profitability profile justifies sustained attention.

National Fittings Ltd. (NATFIT) Share Price Today: Price Action Analysis

National Fittings Ltd. (NATFIT) traded at Rs 185.5. versus the previous close of Rs 170.15, a rise of 9.02%. The stock opened at Rs 171.95, reached Rs 185.75, touched Rs 171.95. Reported volume was 57,929.

National Fittings Ltd. (NATFIT) Fundamental Analysis

National Fittings Ltd. was valued at a P/E ratio of 14.82x, a P/B ratio of 1.66x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of 3.25% and ROCE of 4.81%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 11.48, dividend yield of 0.59%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

National Fittings Fundamental Analysis shows a micro-cap company priced at moderate valuation multiples relative to several sector benchmarks, but with profitability ratios that remain on the lower side. That combination helps explain why today’s move attracts attention, while also keeping the focus on financial quality rather than price alone.

At the current market price, National Fittings Ltd. carries a market capitalisation of Rs 154.55 crore. Its price-to-earnings ratio stands at 14.82, and its price-to-book ratio is 1.66. On the face of it, those are not stretched numbers when viewed against the broader same-industry benchmark, especially because the industry median P/E is 21.06 and the average P/E is 32.2. The company’s P/B of 1.66 is also below the industry median of 2.13 and average of 3.61. That valuation positioning may partly explain why National Fittings Share Price is getting noticed in screen-based stock analysis.

Profitability, however, is more measured. Return on equity is 3.25%, while return on capital employed is 4.81%. Those figures show the business is generating positive returns, but they sit below the same-industry median ROE of 6.95% and median ROCE of 9.6. The gap becomes wider against industry averages of 9.96% for ROE and 11.85% for ROCE. So while valuation is relatively moderate, the profitability profile is not yet especially strong on the supplied numbers.

EPS stands at 11.48, which means the company has positive earnings attributable to each share. Dividend yield is 0.59, indicating a modest historical payout relative to the current share price. National Fittings Share Price also needs to be viewed alongside book-based valuation, and the 1.66 P/B ratio suggests the market is valuing the company at a premium to its accounting net worth, but not at the higher multiples seen in several peers. For readers tracking National Fittings Financial Results and National Fittings Earnings context, today’s rally is easier to understand as a valuation-and-price-action story than a proven profit-inflection story. That makes sector and peer comparison especially important.

Sector and Industry Context

National Fittings Ltd. (NATFIT) is classified under sector: Automobile & Ancillaries and industry: Castings/Forgings.

National Fittings Ltd. (NATFIT) has a P/E ratio of 14.82x, which is below the benchmark median of 21.06x, a difference of -29.63%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

National Fittings Ltd. (NATFIT) has a ROE of 3.25%, which is below the benchmark median of 6.95%, a difference of -53.24%. National Fittings Ltd. (NATFIT) has a ROCE of 4.81%, which is below the benchmark median of 9.6%, a difference of -49.9%.

Track today’s top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

National Fittings operates in Automobile & Ancillaries within the Castings/Forgings industry, and the supplied same-industry benchmark offers a useful frame. Valuation looks lower than benchmark medians and averages, but return ratios are also below the industry’s central levels, creating a mixed but measurable context.

The sector snapshot compares National Fittings Ltd. with 24 companies in the same industry benchmark. Within that set, the company’s P/E of 14.82 is below the P/E median of 21.06 and well below the average of 32.2. The benchmark range is wide, stretching from 3.24 at the low end to 184.44 at the high end across 22 companies with available P/E data. That tells investors two things: first, National Fittings Share Price is not being valued at the expensive end of the industry; second, the industry itself contains very different operating and return profiles.

The same picture holds for book value multiples. National Fittings has a P/B ratio of 1.66 versus a benchmark median of 2.13 and average of 3.61 across 24 companies, with the full range running from 0.68 to 11.84. On profitability, the company’s ROE of 3.25% is below the benchmark median of 6.95% and average of 9.96. Its ROCE of 4.81% is also below the median of 9.6% and average of 11.85. These numbers suggest that the market is not assigning premium valuation multiples despite today’s price rise, which is broadly consistent with the lower return ratios.

Size is another useful part of the picture. National Fittings’ market capitalisation of Rs 154.55 crore is below the benchmark median market cap of Rs 203.09 crore and far below the average of Rs 414.42 crore across 24 companies. The industry range extends from Rs 40.2 crore to Rs 1,194.45 crore. In Univest’s reading, that places National Fittings in the smaller end of a fragmented listed peer set, where price action can quickly bring a micro-cap stock into focus, but relative financial standing still depends on how it compares with peers one by one.

Peer Comparison

National Fittings Ltd. (NATFIT) has a P/E ratio of 14.82x compared with the displayed peer median of 29.89x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 3.25% compares with a peer median of 3.26% across the companies shown in the table. ROCE stood at 4.81% versus the displayed peer median of 6.57%, providing a capital-efficiency comparison. National Fittings Ltd. (NATFIT) has a market capitalisation of Rs 154.55 crore. Among the 5 peers shown, 5 have a larger market capitalisation.

Peer comparison shows where National Fittings sits within the listed Castings/Forgings space. Its valuation is lower than many peers, but its ROE and ROCE are also modest. That makes the stock easier to classify as relatively cheaper than some peers, but not broadly superior on profitability.

Against Alicon Castalloy Ltd., which has a market cap of Rs 1,194.45 crore, P/E of 29.89, P/B of 2.11, ROE of -0.63% and ROCE of 5.57%, National Fittings stands on a lower valuation and slightly lower ROCE, but with positive ROE. Compared with Investment & Precision Castings Ltd., valued at Rs 1,188.1 crore with a P/E of 85.57 and P/B of 11.59, National Fittings looks materially cheaper on both earnings and book-value multiples, while posting higher ROE of 3.25% versus 0.23% and almost similar ROCE at 4.81% versus 4.82%.

Nelcast Ltd. offers a closer operating comparison on return metrics. Nelcast has a market capitalisation of Rs 1,013.13 crore, P/E of 25.01, P/B of 1.71, ROE of 3.26% and ROCE of 6.57%. Here, National Fittings trades on a lower P/E and slightly lower P/B, while ROE is almost identical at 3.25% versus 3.26%; ROCE, however, is lower at 4.81%.

At the stronger end of the peer set, Uni Abex Alloy Products Ltd. has a P/E of 3.24 but much higher ROE of 20.26% and ROCE of 25.17%, showing that low P/E alone does not tell the whole story. Synergy Green Industries Ltd., by contrast, trades at a very high P/E of 184.44 and P/B of 8.53 with ROE of 4.25% and ROCE of 12.92. Captain Technocast Ltd. and Kalyani Cast-Tech Ltd. also trade at higher valuation multiples than National Fittings, with P/Es of 52.94 and 36.17 respectively. Simplex Castings Ltd., with a P/E of 18.57 and ROE of 2.37%, is another useful reference because it shows National Fittings occupying a middle ground: cheaper than many peers, yet still below the best-in-class names on return ratios. For National Fittings Stock Analysis, that peer map matters as much as today’s price rise.

Why Investors Are Watching National Fittings

National Fittings Share Price is being watched because today’s move combined a clear single-day price rise with near-day-high trading, cash-market turnover of Rs 1.07 crore and a valuation profile that looks lower than much of the same-industry benchmark. At the same time, the company’s ROE and ROCE remain below industry medians, which keeps the discussion balanced. In Univest coverage, this is the kind of setup where price action brings a stock onto investor screens, but fundamentals determine whether that attention broadens or fades.

• Price action: the stock rose 9.02% from Rs 170.15 to Rs 185.50 and traded as high as Rs 185.75.
• Participation: BSE volume was 57,929 shares, equal to the total reported traded volume, with turnover at Rs 1.07 crore.
• Valuation context: P/E of 14.82 and P/B of 1.66 are below same-industry medians of 21.06 and 2.13.
• Profitability context: ROE of 3.25% and ROCE of 4.81% are positive, but below benchmark medians.
• Sector position: the company sits in Automobile & Ancillaries, specifically Castings/Forgings, with a market cap below the industry median.

What investors may monitor next is whether National Fittings Share Price can continue to hold close to the day’s higher zone, whether traded value remains healthy for a micro-cap stock, and whether future company updates improve the profitability profile relative to the sector. Univest also sees the peer gap in return ratios as an important part of the story, because valuation alone rarely explains sustained market attention.

About National Fittings

National Fittings Ltd. is positioned within the Automobile & Ancillaries sector and the Castings/Forgings industry. Even from that limited but verified company context, investors can place the business within a manufacturing ecosystem that typically serves component and engineering supply chains. The industry grouping indicates that the company operates in a segment where production capability, order quality, operating efficiency and capital use often shape market perception over time.

Because National Fittings is classified alongside listed castings and forgings businesses, its market position can also be interpreted through sector and peer benchmarks. The company’s market capitalisation of Rs 154.55 crore places it below the same-industry median of Rs 203.09 crore and well below the average of Rs 414.42 crore, reinforcing its micro-cap status. That smaller size matters in market behaviour, since even moderate trading interest can make National Fittings Share Price more visible in Stocks Rising Today and BSE News trackers.

For readers following National Fittings Company News and National Fittings Latest News, the verified take-away is straightforward: this is a smaller listed player in a specialised industrial segment, and today’s price rise has pushed it onto the market radar. In Univest’s framework, that means company context should be read together with valuation, sector standing and peer profitability rather than in isolation.

Track National Fittings Share Price on Univest

Use National Fittings Ltd. (NATFIT) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Investors who want to follow National Fittings Share Price more closely can use Univest to track live price moves, day change, market capitalisation, sector positioning and stock performance in one place. A structured dashboard helps users watch National Fittings Share Price Today alongside valuation ratios such as P/E and P/B, profitability measures like ROE and ROCE, and broader market context across NSE and BSE coverage screens.

Univest also helps users monitor shareholding pattern updates when available, historical 52-week levels, peer comparison and market insights built around verified data. For a stock that has appeared among today’s market movers, the practical value lies in following whether price action, relative valuation and industry comparisons remain aligned over time. That makes National Fittings Share Price easier to track beyond a single-session move.

Frequently Asked Questions

Why is National Fittings Share Price rising today?

Ans. National Fittings Share Price rose because the stock gained Rs 15.35, or 9.02%, to Rs 185.50 from the previous close of Rs 170.15. The supplied data confirms the move and shows strong intraday positioning near the session high.

What was the latest traded price of National Fittings shares?

Ans. The latest supplied price for National Fittings shares was Rs 185.50. That came after the stock opened at Rs 171.95, traded as high as Rs 185.75 and held most of its gains during the observed session.

How much did National Fittings stock gain in today’s trade?

Ans. National Fittings stock gained Rs 15.35 in absolute terms and 9.02% in percentage terms. The rise was measured against the previous close of Rs 170.15, placing the stock among notable micro-cap gainers in today’s trade.

What do the day high and day low show for National Fittings?

Ans. The stock’s day high was Rs 185.75 and the day low was Rs 171.95, which was also the opening price. This shows the session strength developed after the open and prices stayed near the upper end.

What was the trading volume in National Fittings on BSE?

Ans. BSE volume in National Fittings stood at 57,929 shares, and that was also the total reported traded volume in the supplied data. Cash-market turnover for the session was Rs 1.07 crore, indicating active participation.

What is the market capitalisation of National Fittings Ltd.?

Ans. National Fittings Ltd. had a market capitalisation of Rs 154.55 crore in the supplied data. That places it in the Micro Cap category and below the same-industry median market capitalisation of Rs 203.09 crore.

Is National Fittings expensive based on its valuation ratios?

Ans. National Fittings trades at a P/E of 14.82 and a P/B of 1.66. Both are below the same-industry median levels of 21.06 for P/E and 2.13 for P/B, suggesting relatively lower valuation against that benchmark.

How profitable is National Fittings compared with its industry benchmark?

Ans. National Fittings reported ROE of 3.25% and ROCE of 4.81%. Both figures are positive, but they remain below the same-industry median ROE of 6.95% and median ROCE of 9.6 in the supplied benchmark.

What are the EPS and dividend yield of National Fittings?

Ans. National Fittings had an EPS of 11.48 and a dividend yield of 0.59 in the supplied data. EPS indicates positive earnings per share, while the dividend yield points to a modest historical payout relative to price.

How does National Fittings compare with listed peers?

Ans. National Fittings has a lower P/E than peers such as Alicon Castalloy at 29.89, Nelcast at 25.01 and Captain Technocast at 52.94, but its ROE of 3.25% and ROCE of 4.81% remain modest versus stronger peers.