Mold-Tek Technologies (MOLDTECH) Share Price Near 52-Week High as Stock Stays Firm
- October 12, 2026
- Posted by: Chaitanya Auti
- Category: News
Mold-Tek Technologies Share Price opened at Rs 113.65, matched the day’s high at Rs 113.65 and touched a low of Rs 107.1. The previous close was Rs 109.9, so the stock added Rs 3.2 during the morning session. That places Mold-Tek Technologies Share Price Today very near the top of the day’s range, with the current price sitting below the open and high but above the prior close. For readers following Mold-Tek Technologies Share Price Update, this is a clear near-52-week-high event rather than a new yearly peak. The latest Univest numbers simply show where the stock is trading; they do not explain why the move occurred. Mold-Tek Technologies Share Price therefore stays relevant for price watchers and for those scanning Mold-Tek Technologies News Today.
Mold-Tek Technologies Share Price Today: Price Action Analysis
| Metric | Value |
|---|---|
| Current Price | Rs 113.1 |
| Previous Close | Rs 109.9 |
| Today's Move | +Rs 3.2 (+2.91%) |
| Open | Rs 113.65 |
| High | Rs 113.65 |
| Low | Rs 107.1 |
| Market Capitalisation | Rs 633.14 crore |
Mold-Tek Technologies Ltd. (MOLDTECH) traded at Rs 113.1 versus the previous close of Rs 109.9, a rise of 2.91%. The stock opened at Rs 113.65, reached a high of Rs 113.65 and touched a low of Rs 107.1.
Mold-Tek Technologies Share Price Today shows a gain of 2.91% versus the previous close of Rs 109.9, with the stock last traded at Rs 113.1. The day opened at Rs 113.65 and reached the same level as the day high, while the day low was Rs 107.1. This keeps Mold-Tek Technologies Share Price close to the upper end of the morning range. For search interest around Mold-Tek Technologies Share Price Live and Mold-Tek Technologies Share News, the key verified facts are the current price, the day’s move and the proximity to the 52-week high. The event matters because the stock is trading near its one-year high, not because a specific trigger has been identified. That is the cleanest reading of Mold-Tek Technologies Share Price Today from the latest market data.
Mold-Tek Technologies Ltd. (MOLDTECH) Fundamental Analysis
| Metric | Value |
|---|---|
| Market Capitalisation | Rs 633.14 crore |
| P/E Ratio | 34.39x |
| P/B Ratio | 4.43x |
| ROE | 10.22% |
| ROCE | 14.33% |
| EPS | Rs 3.2 |
| Book Value Per Share | Rs 24.8 |
| Dividend Yield | 0% |
Mold-Tek Technologies Ltd. (MOLDTECH) fundamental metrics show P/E 34.39x, P/B 4.43x, ROE 10.22%, ROCE 14.33%. These figures provide context only and are not a buy or sell signal.
Mold-Tek Technologies Ltd. has a market capitalisation of Rs 633.14 crore, which gives readers a sense of company size before judging valuation. On valuation, P/E at 34.39x, P/B at 4.43x should be read against the sector and peer benchmarks rather than as a standalone signal. Profitability is represented by ROE of 10.22% and ROCE of 14.33%, helping investors compare shareholder returns and capital efficiency. According to latest Univest data, additional metrics include EPS of Rs 3.2, book value per share of Rs 24.8, dividend yield of 0%, adding context to earnings, balance-sheet value and historical payout. Against the latest Univest same industry benchmark, these figures can be compared with benchmark median P/E of 11.64x, median ROE of 15.14%, median ROCE of 21.26%. These numbers explain the fundamental backdrop without converting the article into a buy or sell view.
Sector and Industry Context
| Metric | Value |
|---|---|
| Sector | Capital Goods |
| Industry | Engineering Consultancy |
| Benchmark Scope | same industry |
| Company P/E Ratio | 34.39x |
| Benchmark Median P/E | 11.64x |
| Benchmark Average P/E | 76.66x |
| Benchmark P/E Range | 0x to 973.79x |
| Company P/B Ratio | 4.43x |
| Benchmark Median P/B | 1.81x |
| Company ROE | 10.22% |
| Benchmark Median ROE | 15.14% |
| Company ROCE | 14.33% |
| Benchmark Median ROCE | 21.26% |
| Company Market Capitalisation | Rs 633.14 crore |
| Benchmark Median Market Cap | Rs 86.6 crore |
Mold-Tek Technologies Ltd. (MOLDTECH) is classified under sector: Capital Goods and industry: Engineering Consultancy.
Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 34.39x, which is above the benchmark median of 11.64x, a difference of +195.45%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.
Mold-Tek Technologies Ltd. (MOLDTECH) has a ROE of 10.22%, which is below the benchmark median of 15.14%, a difference of -32.5%. Mold-Tek Technologies Ltd. (MOLDTECH) has a ROCE of 14.33%, which is below the benchmark median of 21.26%, a difference of -32.6%.
Track stocks reaching yearly peaks through the Univest 52-week-high screener. The peer table below provides the company-level comparison.
Peer Comparison
| Company | Symbol | Market Cap (Cr) | P/E | P/B | ROE (%) | ROCE (%) |
|---|---|---|---|---|---|---|
| Monarch Surveyors and Engineering Consultants Ltd. | MSECL | 353.83 | 9.5 | 1.53 | 21.9 | 28.51 |
| Likhami Consulting Ltd. | LIKHAMI | 310.64 | 973.79 | 8.84 | 0.66 | 0.91 |
| TELGE PROJECTS LIMITED | TELGE | 240.1 | 40.39 | 5.42 | 23.5 | 24.46 |
| HVAX Technologies Ltd. | HVAX | 197.16 | 13.78 | 2.28 | 21.45 | 22.44 |
| Winsol Engineers Ltd. | WINSOL | 129.08 | 8.97 | 2.61 | 35.15 | 36.65 |
Mold-Tek Technologies Ltd. (MOLDTECH) has a P/E ratio of 34.39x compared with the displayed peer median of 13.78x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 10.22% compares with a peer median of 21.9% across the companies shown in the table. ROCE stood at 14.33% versus the displayed peer median of 24.46%, providing a capital-efficiency comparison. Mold-Tek Technologies Ltd. (MOLDTECH) has a market capitalisation of Rs 633.14 crore. Its market capitalisation is larger than each of the 5 peers shown.
Why Investors Are Watching Mold-Tek Technologies
- Mold-Tek Technologies Share Price is Rs 113.1, which is above the previous close of Rs 109.9 and close to the 52-week high.
- Mold-Tek Technologies Share Price Today shows a gain of 2.91% from the previous close.
- The company’s market capitalisation is Rs 633.14 Cr, which is higher than the industry median market cap of Rs 86.6 Cr.
- Mold-Tek Technologies Fundamental Analysis shows a P/E of 34.39, a P/B of 4.43, ROE of 10.22% and ROCE of 14.33%.
About Mold-Tek Technologies
Mold-Tek Technologies Share Price belongs to Mold-Tek Technologies Ltd., which operates in the Capital Goods sector and the Engineering Consultancy industry. The company’s latest quarterly revenue stood at Rs 59.54 Cr for Jun 2026. Its key market metrics include market cap, P/E, P/B, EPS, book value and dividend yield, which are all part of the company’s public market profile. For readers scanning Mold-Tek Technologies Company News and Mold-Tek Technologies Stock Performance, this is the base operating and valuation context that sits behind the share price move.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Uniresearch Global Pvt. Ltd. (Research Analyst, SEBI Registration Number INH000013776), a subsidiary of Univest Communication Technologies Private Limited.
Frequently Asked Questions
Why is Mold-Tek Technologies Share Price near its 52-week high?
Ans. Mold-Tek Technologies Share Price is trading at Rs 113.1, which is close to its yearly high. The latest Univest data confirms the price event, but it does not identify a specific company catalyst.
What is Mold-Tek Technologies Share Price today?
Ans. Mold-Tek Technologies Share Price today is Rs 113.1, up 2.91% from the previous close of Rs 109.9. The stock opened at Rs 113.65 and touched the same level as the day high.
What does Mold-Tek Technologies Share Price tell investors right now? How is Mold-Tek Technologies valued?
Ans. Mold-Tek Technologies Share Price is supported by a P/E of 34.39 and a P/B of 4.43. Those levels sit above the same-industry medians, while ROE and ROCE remain below the industry medians.
What is Mold-Tek Technologies market cap?
Ans. Mold-Tek Technologies Share Price corresponds to a market capitalisation of Rs 633.14 Cr. That is above the same-industry median market cap of Rs 86.6 Cr in the sector snapshot.
What are the key fundamentals behind Mold-Tek Technologies Share Price?
Ans. The key fundamentals are EPS of 3.2, book value of Rs 24.8, ROE of 10.22%, ROCE of 14.33% and dividend yield of 0. These figures frame the current valuation discussion.
How does Mold-Tek Technologies compare with peers?
Ans. Mold-Tek Technologies Share Price can be compared with peers such as Monarch Surveyors, TELGE Projects, HVAX Technologies and Winsol Engineers. Its market cap is larger, while peer return ratios vary widely across the group.
What revenue figure is available for Mold-Tek Technologies?
Ans. The latest quarterly revenue for Mold-Tek Technologies is Rs 59.54 Cr for Jun 2026. That gives readers a recent operating reference alongside Mold-Tek Technologies Share Price and valuation ratios.
Track Mold-Tek Technologies Share Price on Univest
Use Mold-Tek Technologies Ltd. (MOLDTECH) live share-price page, Univest 52-week-high screener, Univest market blogs to review live stock data, yearly-high lists and related market analysis.
Track Mold-Tek Technologies Share Price on Univest for live updates, market cap, valuation ratios, sector context, 52-week levels and broader stock news. Univest also helps readers follow Mold-Tek Technologies Share Price Today, Mold-Tek Technologies Latest News and Mold-Tek Technologies Stock Analysis in one place.