Univest
Univest
  • Markets

Amic Forging Ltd. (AMIC) Share Price Within 2% of All-Time High

  • August 12, 2026
  • Posted by: Harsh Piplani
  • Category: News
No Comments
Amic Forging Ltd. Share Price

Amic Forging Ltd. Share Price stood at Rs 1,970 at qualification, placing the stock within 2% of its all-time high. The company’s market capitalisation was Rs 2,197.12 crore.

Amic Forging Ltd. Share Price was at Rs 1,970 when the Univest screener flagged the stock on 12 August 2026 at 12:31:09 PM IST, with the company carrying a market capitalisation of Rs 2,197.12 crore. The verified event here is specific: the stock is trading within 2% of its all-time high, placing it close to record levels and making it relevant for investors who track strength near historic peaks.

The supplied data confirms the price event, but it does not establish a company-specific catalyst behind the move. Even so, proximity to an all-time high matters because it often prompts a closer look at valuation, profitability and industry positioning. In this case, Amic Forging Ltd. Share Price is not just being watched for where it trades today, but also for how its Rs 2,197.12 crore market value and valuation multiples compare with other forgings names.

Univest data also shows that the stock belongs to the Automobile & Ancillaries sector and the Forgings industry, which provides a useful benchmark for assessing whether the current pricing is supported by earnings, book value and return ratios. That makes Amic Forging Ltd. Share Price Today a broader stock analysis story rather than a simple price headline.

Amic Forging Ltd. Share Price Today: Within 2% of All-Time High

Amic Forging Ltd. Share Price Today was Rs 1,970 at the time the event qualified, according to the Univest screener. The same Rs 1,970 figure is the exact event qualification LTP captured at 12:31:09 PM IST on 12 August 2026. Univest identifies the stock as trading within 2% of its all-time high, which means the counter is within striking distance of its historic peak without any confirmation here that it touched or crossed that level.

That distinction matters. A near-ATH setup can attract investor attention because it highlights sustained strength in price positioning, but it is not the same as a confirmed new record. For market participants, Amic Forging Ltd. Share Price being close to record levels can be relevant for two reasons. First, such price zones often draw more scrutiny around whether fundamentals justify the prevailing multiple. Second, they can sharpen comparisons with sector and industry peers, especially when the stock is already trading on meaningfully different valuation ratios.

With a market capitalisation of Rs 2,197.12 crore, Amic Forging Ltd. is also substantially larger than many listed forgings peers in the supplied benchmark set. That gives added importance to how the market is valuing its earnings and net worth at this stage. As a result, Amic Forging Ltd. Stock News today is less about a one-line price update and more about whether momentum and valuation are aligned. The next step is to examine the fundamental backdrop behind this near all-time high status.

Amic Forging Ltd. (AMIC) Share Price Today: Price Action Analysis

Metric Value
LTP at 2% Qualification Rs 1,970
Market Capitalisation Rs 2,197.12 crore
All-Time High Position Trading within 2% of its all-time high

Amic Forging Ltd. (AMIC) traded at Rs 1,970. Reported volume was 98,900.

Amic Forging Ltd. (AMIC) Fundamental Analysis

Metric Value
Market Capitalisation Rs 2,197.12 crore
P/E Ratio 80.14x
P/B Ratio 9.4x
ROE 8.27%
ROCE 9.75%
EPS Rs 24.42
Book Value Per Share Rs 208.16
Dividend Yield 0%

Amic Forging Ltd. was valued at a P/E ratio of 80.14x, a P/B ratio of 9.4x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of 8.27% and ROCE of 9.75%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 24.42, book value per share of Rs 208.16, dividend yield of 0%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

Amic Forging Ltd. Fundamental Analysis starts with size and valuation. The company’s market capitalisation stands at Rs 2,197.12 crore, which places it firmly above the industry median market capitalisation of Rs 122.30 crore and the industry average of Rs 378.33 crore in the supplied same-industry benchmark. That shows investors are assigning materially more value to Amic Forging Ltd. than to many other forgings companies tracked in this comparison set.

On earnings valuation, the P/E ratio is 80.14. EPS is Rs 24.42, which shows the earnings attributable to each share at the current stage. A P/E of 80.14 is a demanding multiple in isolation, and the sector benchmarking later in this article becomes important because it helps show whether that premium is unusual or broadly in line with comparable forgings names. Amic Forging Ltd. Share Price therefore reflects not only current profitability but also the market’s willingness to pay a high multiple of earnings.

The P/B ratio is 9.40, while book value per share is Rs 208.16. Book value represents the accounting net worth behind each share, so the gap between Rs 1,970 and Rs 208.16 indicates that the market is pricing the company at a substantial premium to stated book value. Whether that premium looks stretched or justified depends on return metrics and peer context.

On operating efficiency, ROE is 8.27% and ROCE is 9.75%. These are positive returns, but they are not exceptionally high when set against the valuation multiples. Dividend yield is 0, which means the current or historical payout contribution to shareholder return is nil in the supplied data. Taken together, the fundamentals show a company that is profitable and valued richly, making Amic Forging Ltd. Share Price a valuation-sensitive story as it trades near its ATH. That naturally leads into how the stock sits within its sector and industry context on Univest.

Sector and Industry Context

Metric Value
Sector Automobile & Ancillaries
Industry Forgings
Benchmark Scope same industry
Company P/E Ratio 80.14x
Benchmark Median P/E 21.67x
Benchmark Average P/E 35.03x
Benchmark P/E Range 0x to 140.91x
Company P/B Ratio 9.4x
Benchmark Median P/B 2.6x
Company ROE 8.27%
Benchmark Median ROE 9.32%
Company ROCE 9.75%
Benchmark Median ROCE 12.31%
Company Market Capitalisation Rs 2,197.12 crore
Benchmark Median Market Cap Rs 122.3 crore

Amic Forging Ltd. (AMIC) is classified under sector: Automobile & Ancillaries and industry: Forgings.

Amic Forging Ltd. (AMIC) has a P/E ratio of 80.14x, which is above the benchmark median of 21.67x, a difference of +269.82%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Amic Forging Ltd. (AMIC) has a ROE of 8.27%, which is below the benchmark median of 9.32%, a difference of -11.27%. Amic Forging Ltd. (AMIC) has a ROCE of 9.75%, which is below the benchmark median of 12.31%, a difference of -20.8%.

Track today’s top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

Amic Forging Ltd. operates in the Automobile & Ancillaries sector and the Forgings industry. The primary benchmark here covers the same industry, with a scope of 15 companies. That makes the comparison relatively focused, because it looks at listed forgings businesses rather than the wider 166-company sector universe. For investors tracking Amic Forging Ltd. Share Price, this narrower benchmark is useful in judging how unusual the stock’s valuation and return profile is inside its direct operating space.

The company P/E is 80.14, compared with an industry median of 21.67 and an industry average of 35.03. The benchmark P/E range runs from 0 to 140.91. On that basis, Amic Forging Ltd. is trading well above both the median and average, with the supplied comparison showing the company P/E at 269.82% above the median. This suggests the market is assigning a steep earnings multiple relative to the broader forgings set.

The company P/B is 9.40, versus a median of 2.60 and an average of 4.22, within a benchmark range of 0.63 to 22.13. The supplied data shows company P/B at 261.54% above the median. By contrast, profitability metrics are more restrained. ROE is 8.27%, below the industry median of 9.32% and average of 12.85, while ROCE is 9.75%, below the median of 12.31% but below only modestly against the average of 10.67. The supplied differentials are -11.27% versus median ROE and -20.80% versus median ROCE.

Market capitalisation adds another dimension. At Rs 2,197.12 crore, the company is far above the industry median of Rs 122.30 crore and average of Rs 378.33 crore, though still below the maximum benchmark market cap of Rs 3,175.72 crore. In short, Amic Forging Ltd. Share Price is being valued at a significant premium inside its direct industry group, even though return ratios sit below the industry median. That makes peer comparison particularly relevant.

Peer Comparison

Company Symbol Market Cap (Cr) P/E P/B ROE (%) ROCE (%)
MM Forgings Ltd. MMFL 3,175.72 31.48 3.19 17.39 13.35
Tirupati Forge Ltd. TIRUPATIFL-BE 887 140.91 6.75 2.04 3.61
METALIC TECHNOFORGE LTD METALIC-SM 267.91 21.67 6.71 36.28 23.33
Kalyani Forge Ltd. KALYANIFRG 228.74 24.55 2.37 -1.74 0.77
Krishanveer Forge Ltd. KVFORGE 155.34 13.75 2.91 12.68 16.5

Amic Forging Ltd. (AMIC) has a P/E ratio of 80.14x compared with the displayed peer median of 24.55x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 8.27% compares with a peer median of 12.68% across the companies shown in the table. ROCE stood at 9.75% versus the displayed peer median of 13.35%, providing a capital-efficiency comparison. Amic Forging Ltd. (AMIC) has a market capitalisation of Rs 2,197.12 crore. Among the 5 peers shown, 1 have a larger market capitalisation.

The peer snapshot sharpens the picture around Amic Forging Ltd. Share Price. Among the supplied listed forgings peers, MM Forgings Ltd. has the largest market capitalisation at Rs 3,175.72 crore, ahead of Amic Forging Ltd. at Rs 2,197.12 crore. Tirupati Forge Ltd. stands at Rs 887 crore, while METALIC TECHNOFORGE LTD is at Rs 267.91 crore, Kalyani Forge Ltd. at Rs 228.74 crore and Krishanveer Forge Ltd. at Rs 155.34 crore. That means Amic Forging is one of the larger companies in this peer subset.

Valuation, however, is elevated. Amic Forging’s P/E of 80.14 is much higher than MM Forgings at 31.48, METALIC TECHNOFORGE at 21.67, Kalyani Forge at 24.55 and Krishanveer Forge at 13.75. Only Tirupati Forge at 140.91 trades at a higher supplied P/E. On P/B too, Amic Forging at 9.40 is above MM Forgings at 3.19, Tirupati Forge at 6.75, METALIC TECHNOFORGE at 6.71, Kalyani Forge at 2.37 and Krishanveer Forge at 2.91.

Return ratios tell a more mixed story. Amic Forging’s ROE of 8.27% is below MM Forgings at 17.39%, METALIC TECHNOFORGE at 36.28% and Krishanveer Forge at 12.68%, though above Kalyani Forge at -1.74% and Tirupati Forge at 2.04%. ROCE of 9.75% is also below MM Forgings at 13.35%, METALIC TECHNOFORGE at 23.33% and Krishanveer Forge at 16.50%, but above Tirupati Forge at 3.61% and Kalyani Forge at 0.77%.

That leaves Amic Forging Ltd. Share Price in an interesting position: it commands a premium valuation and a relatively large market capitalisation, but its profitability metrics are not the strongest in the peer set. For investors, that combination is exactly why a near-ATH price event deserves careful comparison rather than headline-only interpretation.

Why Investors Are Watching Amic Forging Ltd.

Amic Forging Ltd. Share Price is being watched because the stock is trading within 2% of its all-time high, a zone that typically brings valuation, relative strength and peer positioning into sharper focus. The Univest screener has identified the stock near its ATH at an event LTP of Rs 1,970, while the company’s Rs 2,197.12 crore market capitalisation places it among the larger names in the supplied forgings universe.

  • Verified price event: the stock qualified at Rs 1,970 and is trading within 2% of its all-time high.
  • Momentum context: RSI stands at 52.92, which is broadly neutral rather than overheated.
  • Fundamental context: P/E is 80.14, P/B is 9.40, EPS is Rs 24.42 and book value is Rs 208.16.
  • Profitability context: ROE is 8.27% and ROCE is 9.75%.
  • Industry position: the company trades above the industry median on both P/E and P/B.

What investors may monitor next is whether Amic Forging Ltd. Share Price continues to hold close to record levels while its valuation premium remains materially above the same-industry benchmark. Univest data suggests this is a stock where price strength, peer comparison and return ratios need to be considered together rather than in isolation.

About Amic Forging Ltd.

Amic Forging Ltd. operates in the Forgings industry within the broader Automobile & Ancillaries sector. Based on the supplied company classification, its business sits in a manufacturing segment that typically serves component requirements linked to automotive and adjacent industrial use cases. In market terms, the company is part of a specialised industrial group rather than a diversified broad-sector manufacturer.

The company’s scale is notable inside its direct industry context. With a market capitalisation of Rs 2,197.12 crore, Amic Forging Ltd. is much larger than the same-industry median of Rs 122.30 crore and the average of Rs 378.33 crore in the supplied benchmark universe of 15 forgings companies. That size suggests the market already places the company in the upper tier of listed peers by value, even though it remains below the benchmark maximum of Rs 3,175.72 crore.

Its industry context is also important for interpreting Amic Forging Ltd. Share Price. Forgings companies are often compared on earnings multiples, book value and capital efficiency because these metrics help investors assess both pricing power and the quality of returns on invested capital. In Amic Forging’s case, the market is valuing the business at a meaningful premium to many peers, which is why its near all-time high position has become a notable stock news event on Univest.

Track Amic Forging Ltd. Share Price on Univest

Use Amic Forging Ltd. (AMIC) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Investors tracking Amic Forging Ltd. Share Price can use Univest to follow live price moves, market capitalisation, technical indicators, valuation ratios and broader market insights in one place. For stocks approaching all-time high zones, that consolidated view matters because price action alone rarely tells the full story.

On Univest, users can monitor Amic Forging Ltd. Share Price Today alongside metrics such as P/E, P/B, ROE, ROCE, EPS, book value and 52-week reference levels, while also comparing the stock with other listed forgings companies. The platform also helps place near-ATH events in context through sector benchmarking and peer analysis, which is especially useful when a stock is trading at premium valuations.

Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).

Frequently Asked Questions

What is Amic Forging Ltd. Share Price today?

Ans. Amic Forging Ltd. Share Price was Rs 1,970 when the Univest screener qualified the event on 12 August 2026 at 12:31:09 PM IST. That price placed the stock within 2% of its all-time high.

Why is Amic Forging Ltd. Share Price in focus today?

Ans. Amic Forging Ltd. Share Price is in focus because the stock is trading within 2% of its all-time high. With a market capitalisation of Rs 2,197.12 crore, the event puts valuation and peer comparisons under closer watch.

What does the near all-time high event mean for Amic Forging Ltd.?

Ans. It means the stock is trading close to its historic peak, not that it has created a new high. For Amic Forging Ltd., this brings attention to current pricing, valuation multiples and its position within the forgings industry.

What is the market capitalisation of Amic Forging Ltd.?

Ans. Amic Forging Ltd. had a market capitalisation of Rs 2,197.12 crore in the supplied data. That is well above the same-industry median of Rs 122.30 crore and the average of Rs 378.33 crore.

Is Amic Forging Ltd. expensive compared with its industry?

Ans. On the supplied benchmark, Amic Forging Ltd. looks richly valued. Its P/E is 80.14 versus the industry median of 21.67, while its P/B is 9.40 compared with the benchmark median of 2.60.

What do Amic Forging Ltd.’s profitability ratios show?

Ans. The supplied profitability metrics show ROE at 8.27% and ROCE at 9.75%. Both are positive, but each is below the same-industry median, which stands at 9.32% for ROE and 12.31% for ROCE.

What are the EPS, book value and dividend yield of Amic Forging Ltd.?

Ans. Amic Forging Ltd. reported EPS of Rs 24.42, book value per share of Rs 208.16 and dividend yield of 0. These figures help explain earnings support, net worth backing and payout context at current prices.

How does Amic Forging Ltd. compare with listed forgings peers?

Ans. Amic Forging Ltd. is one of the larger supplied peers by market capitalisation at Rs 2,197.12 crore, but its P/E of 80.14 is above MM Forgings, METALIC TECHNOFORGE, Kalyani Forge and Krishanveer Forge.

Which sector and industry does Amic Forging Ltd. belong to?

Ans. Amic Forging Ltd. belongs to the Automobile & Ancillaries sector and operates in the Forgings industry. The supplied benchmark comparison for valuation and returns covers 15 listed companies from the same industry.



Author: Harsh Piplani
I am Harsh Piplani, an Assistant Content Manager with over 5 years of experience in crafting impactful, result-driven content. I hold a B.Com (Hons) degree and have worked across diverse industries, including education, fintech, healthcare, jewellery, and more. I specialise in content strategy, SEO, and optimisation, ensuring that every piece I create is not just well-written but also well-ranked. I believe content should do more than fill space so as to drive traffic, build authority, and support business growth. I enjoy turning complex ideas into clear, engaging narratives, and, as I like to say, I know how to spin words like a web to influence, structured, strategic, and impossible to ignore. For me, great content sits at the intersection of creativity and performance.

Leave a Reply Cancel reply