Univest
Univest
  • Markets

Talbros Automotive Components Share Price Target 2027: 3.7% Upside to Rs 419, Bull Rs 510

  • November 20, 2026
  • Posted by: Ankit Jaiswal
  • Category: Market
No Comments
Talbros Automotive Components Share Price Target 2027: 3.7% Upside to Rs 419, Bull Rs 510

Talbros Automotive Components share price Rs 404.05 (20 November 2026). Base target Rs 419, bull Rs 510, downside risk Rs 335. PE 21.22. 52W range Rs 219.90 to Rs 485.80.

Quick Answer

The Talbros Automotive Components share price target for 2027 is Rs 419, about 3.7% above the current price of Rs 404.05. The bull case is Rs 510, and the downside risk level, which is not a target, is Rs 335. The base case assumes flat earnings per share because EPS did not grow over FY24 to FY26, with the stock holding its PE of 21.22. These are model-based estimates built from reported financials, not guaranteed outcomes.

Investors weighing a Talbros Automotive Components target price for 2027 should start with where the stock sits today. At Rs 404.05 on 20 November 2026, it is 16.8% below its 52-week high of Rs 485.80 and 83.7% above its 52-week low of Rs 219.90. That range spans 121% from low to high, so the entry point matters as much as the Talbros Automotive Components price forecast itself.

This article builds the Talbros Automotive Components share price target from reported numbers only: five years of annual results, the last five quarters, the latest shareholding pattern and current valuation ratios from company filings and exchange data. Each scenario states its assumptions, so you can trace how the base case, the bull case and the downside risk level were reached and test them against your own view.

Click Here – Get Free Investment Predictions

Table of Contents

Toggle
  • Talbros Automotive Components Stock Analysis: Company Overview and Key Stats
  • Why Is Talbros Automotive Components Share Price Target Set at Rs 419 for 2027?
    • Earnings Growth Behind the Talbros Automotive Components Target Price: Five Years of Results
    • Margins and the Latest Quarter
    • Balance Sheet and Cash Flow
    • Valuation Check for the Talbros Automotive Components Stock Target: PE, Price to Book and ROE
    • Shareholding Pattern and Institutional Holding
  • Talbros Automotive Components Share Price Targets for the Short Term and 12 Months
    • Short Term Talbros Automotive Components Stock Target Levels: Technical Setup
    • 12 Month Talbros Automotive Components Target Price for 2027
    • How EPS Growth and PE Multiple Change the Talbros Automotive Components Target Price
  • Bull Case and Downside Risk for Talbros Automotive Components Stock Target in 2027
    • Bull Case Rs 510
    • Downside Risk Level Rs 335
  • Key Risks to the Talbros Automotive Components Target Price for 2027
    • Growth Slowdown Risk for the Talbros Automotive Components Price Target
    • Liquidity and Size Risk
    • Valuation and Margin Risk
    • Market and Technical Risk
  • What to Watch to Validate the Talbros Automotive Components Target by 2027
  • Conclusion
  • FAQs on Talbros Automotive Components Share Price Target 2027
    • What is the Talbros Automotive Components share price target for 2027?
    • What is the Talbros Automotive Components share price today?
    • Is Talbros Automotive Components a buy or sell at the current price?
    • What are the bull case target and downside risk level for Talbros Automotive Components shares?
    • What are the main risks to the Talbros Automotive Components price target?
    • What is the PE ratio of Talbros Automotive Components and how does it compare with the industry?
    • Who owns Talbros Automotive Components, and what is the promoter holding?
    • What were Talbros Automotive Components’ latest quarterly results?

Talbros Automotive Components Stock Analysis: Company Overview and Key Stats

Talbros Automotive Components (NSE: TALBROAUTO) has a market capitalisation of Rs 2,584 crore. In FY26 it reported revenue of Rs 888.51 crore and net profit of Rs 104.11 crore. The table collects the figures the Talbros Automotive Components share price target is built on.

Metric Value
Company Talbros Automotive Components
NSE Ticker TALBROAUTO
CMP (20 November 2026) Rs 404.05
52-Week High Rs 485.80
52-Week Low Rs 219.90
Market Cap Rs 2,584 crore
PE Ratio (TTM) 21.22
Industry PE 36.96
Price to Book 2.96
Return on Equity 14.01%
Debt to Equity 0.11
EPS (TTM) Rs 19.73
Dividend Yield 0.18%
12-Month Base Target Rs 419
Bull Case Rs 510
Downside Risk Level (not a target) Rs 335

Why Is Talbros Automotive Components Share Price Target Set at Rs 419 for 2027?

The arithmetic is short. Trailing EPS of Rs 19.73 grown for one year gives a forward EPS estimate of Rs 19.73, and multiplying it by the unchanged PE of 21.22 gives the Rs 419 base-case Talbros Automotive Components stock target. The bull case adds faster earnings growth and a higher multiple, while the downside risk level assumes flat earnings and a lower multiple.

Earnings Growth Behind the Talbros Automotive Components Target Price: Five Years of Results

Talbros Automotive Components grew revenue from Rs 587.64 crore in FY22 to Rs 888.51 crore in FY26, a compound annual growth rate of 10.9%. Net profit grew faster, from Rs 44.89 crore to Rs 104.11 crore (23.4% a year), which shows margin gains did part of the work and not just higher sales.

Financial Year Revenue (Rs Cr) Net Profit (Rs Cr) EPS (Rs) Dividend per Share (Rs)
FY22 587.64 44.89 36.36 2.50
FY23 655.19 55.58 9.00 0.50
FY24 790.86 109.98 17.82 0.70
FY25 844.73 94.43 15.30 0.70
FY26 888.51 104.11 16.87 0.75

FY26 revenue growth was 5.2%, slower than the four-year average of 10.9%, and net profit moved up 10.3%. EPS fell from Rs 17.82 in FY24 to Rs 16.87 in FY26. The FY27 outlook for the Talbros Automotive Components price target depends on whether that EPS estimate keeps compounding.

Margins and the Latest Quarter

Talbros Automotive Components converted 11.7% of FY26 revenue into net profit, against 11.2% in FY25, within a five-year range of 7.6% to 13.9%. EBITDA margin was 19.9% in FY26 versus 19.5% in FY25.

In the September 2026 quarter, revenue was Rs 267.49 crore, up 23.3% from the same quarter a year earlier, while net profit of Rs 32.94 crore was up 42.6%. EBITDA came in at Rs 47.21 crore, up 32.8% year on year. The next quarterly result is the first test of whether the earnings assumption behind the Talbros Automotive Components stock target holds.

Balance Sheet and Cash Flow

Debt to equity stands at 0.11, and shareholders’ equity grew from Rs 301.88 crore in FY22 to Rs 742.95 crore in FY26. Operating cash flow in FY26 was Rs 84.67 crore against capital expenditure of Rs 41.49 crore, leaving free cash flow of Rs 43.18 crore, or 1.7% of the current market capitalisation. In FY25 free cash flow was Rs 26.24 crore.

Valuation Check for the Talbros Automotive Components Stock Target: PE, Price to Book and ROE

At a PE of 21.22 against an industry PE of 36.96, Talbros Automotive Components trades at a discount to its industry. Price to book is 2.96 on a book value of Rs 141.59 per share, and return on equity is 14.01%. A PE of 21.22 equals an earnings yield of 4.7%, and the FY26 dividend of Rs 0.75 per share gives a yield of 0.18%.

Shareholding Pattern and Institutional Holding

Promoters held 58.43% of Talbros Automotive Components in September 2026, and promoter holding has stayed near 58.43% since September 2025. Foreign institutional investors (FII) held 1.71% and domestic institutions (DII) held 0.19%, which puts total institutional holding at 1.90%. FII holding rose from 0.72% in September 2025 to 1.71% in September 2026. Public shareholders own the remaining 39.67%. Institutional holding this low means the stock sees limited professional coverage, and price moves can be sharper when trading volumes are thin.

Talbros Automotive Components Share Price Targets for the Short Term and 12 Months

Short Term Talbros Automotive Components Stock Target Levels: Technical Setup

At Rs 404.05 on 20 November 2026, Talbros Automotive Components trades above its 50-day simple moving average of Rs 403.12 and above its 200-day exponential moving average of Rs 365.34. The 14-day RSI reads 71.8, which is overbought territory, and the MACD line sits above its signal line. The nearest resistance level is Rs 485.80 (52-week high) and the nearest support is Rs 403.12 (50-day simple moving average). A sustained move above Rs 485.80 would improve the short-term setup, while a close below Rs 403.12 would shift attention to the next support.

12 Month Talbros Automotive Components Target Price for 2027

The 12-month target of Rs 419 means a move of 3.7% up from Rs 404.05 over the next 12 months. It would still leave the stock 13.8% below its 52-week high of Rs 485.80. The upside in the base case is thin, so the thesis here leans on the bull case and on patience. Anyone checking the Talbros Automotive Components share price target against their own view should focus on two inputs: the EPS estimate and the PE multiple.

How EPS Growth and PE Multiple Change the Talbros Automotive Components Target Price

EPS Growth PE 16.98 PE 21.22 PE 24.40
0.0% (EPS Rs 19.73) Rs 335 Rs 419 Rs 481
0.0% (EPS Rs 19.73) Rs 335 Rs 419 Rs 481
6.0% (EPS Rs 20.91) Rs 355 Rs 444 Rs 510

Each cell multiplies the forward EPS estimate by the PE shown. Reading across a row shows what a de-rating or re-rating does to the Talbros Automotive Components price forecast, and reading down a column shows what earnings growth is worth at a fixed multiple.

Bull Case and Downside Risk for Talbros Automotive Components Stock Target in 2027

Bull Case Rs 510

The bull case Talbros Automotive Components price target needs EPS growth of 6.0%, which lifts forward EPS to Rs 20.91, and a PE multiple that rises 15% to 24.40. That gives Rs 510, 26.2% above the current price and above the 52-week high of Rs 485.80, so the stock would have to set a fresh 52-week high.

Downside Risk Level Rs 335

The downside risk level is not a target. It assumes EPS stays flat at Rs 19.73 and the PE falls 20% to 16.98. That gives Rs 335, 17.1% below the current price and above the 52-week low of Rs 219.90.

Scenario EPS Growth PE Multiple Price (Rs) Change vs CMP
Bull Case 6.0% 24.40 Rs 510 +26.2%
Base Case 0.0% 21.22 Rs 419 +3.7%
Downside Risk 0.0% 16.98 Rs 335 -17.1%

Key Risks to the Talbros Automotive Components Target Price for 2027

Growth Slowdown Risk for the Talbros Automotive Components Price Target

Revenue in the September 2026 quarter was up 23.3% year on year, and FY26 revenue growth was 5.2%. If growth slows from here, the EPS estimate behind the Talbros Automotive Components stock target will need revising.

Liquidity and Size Risk

Talbros Automotive Components has a market capitalisation of Rs 2,584 crore. Institutional holding is 1.90%, and promoters hold 58.43%. Stocks of this size can move sharply on small volumes, and exits can take longer than entries.

Valuation and Margin Risk

Net margin was 11.7% in FY26, so a small slip in costs moves profit noticeably. At a PE of 21.22 versus an industry PE of 36.96, a de-rating toward the downside-risk PE of 16.98 would cut the price even if earnings hold.

Market and Technical Risk

Technical indicators add short-term risk: the 14-day RSI is 71.8 and the MACD sits above its signal line. A broad fall in the Nifty 50 or the Sensex can override company fundamentals for weeks at a time. That applies to any Talbros Automotive Components stock target, however carefully it is built.

What to Watch to Validate the Talbros Automotive Components Target by 2027

The base-case Talbros Automotive Components share price target of Rs 419 needs EPS to move from Rs 19.73 to about Rs 19.73, which is 0.0% growth over the next twelve months. The bull case of Rs 510 needs 6.0% growth and a higher multiple. Each quarterly result is a checkpoint against those two numbers.

Two figures decide whether the target stays valid: reported quarterly profit against the run rate implied by Rs 19.73 EPS, and the PE of 21.22 against the industry PE. If EPS growth tracks below 0.0%, the base case needs to be lowered; if it runs above, the bull case gains weight.

Check Talbros Automotive Components fundamentals on the Univest Screener

The prices here are as of 20 November 2026, so refresh the Rs 404.05 quote before relying on any level. This is a model-based estimate, not investment advice; consult a SEBI-registered advisor before acting on it.

Download the Univest iOS App or Univest Android App to track Talbros Automotive Components live price and get daily stock recommendations.

Conclusion

The Talbros Automotive Components share price target for 2027 is Rs 419 in the base case, with Rs 510 as the bull case. The support for that view is arithmetic you can check: EPS grew -2.7% a year over FY24 to FY26, and the stock trades at a PE of 21.22. The risks are equally concrete, including a net margin of just 11.7% that leaves profit sensitive to costs and a downside scenario that cuts the price 17% if earnings stall. Use these numbers as a framework for judging the Talbros Automotive Components price target, check them against the latest filings, and size any position to your own risk appetite.

Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).

FAQs on Talbros Automotive Components Share Price Target 2027

What is the Talbros Automotive Components share price target for 2027?

Ans. The base-case Talbros Automotive Components share price target for 2027 is Rs 419, which is 3.7% above the price of Rs 404.05 on 20 November 2026. The bull case is Rs 510 and the downside risk level, which is not a target, is Rs 335. All three come from one method: forward EPS multiplied by a PE multiple, using only reported results. They are model estimates and not guaranteed outcomes, and the next quarterly result is the first check on the EPS assumption.

What is the Talbros Automotive Components share price today?

Ans. As of 20 November 2026, before market open, Talbros Automotive Components (NSE: TALBROAUTO) trades at Rs 404.05, up 0.07% on the day. That is 16.8% below the 52-week high of Rs 485.80 and 83.7% above the 52-week low of Rs 219.90. The market capitalisation of Rs 2,584 crore places it among small-cap stocks. Prices change through the trading session, so check the live quote before acting on any level in this article.

Is Talbros Automotive Components a buy or sell at the current price?

Ans. The data points both ways. On the positive side, EPS has grown -2.7% a year over FY24 to FY26 and the base case implies 3.7% upside; on the cautious side, the net margin is a thin 11.7%, and the downside risk level of Rs 335 is 17% below the current price. Whether Talbros Automotive Components fits your portfolio depends on your time horizon, position size and risk appetite. Consult a SEBI-registered advisor before investing, as this article is not investment advice.

What are the bull case target and downside risk level for Talbros Automotive Components shares?

Ans. The bull case in the Talbros Automotive Components share price target for 2027 is Rs 510, which assumes 6.0% EPS growth and a PE of 24.40, a 15% re-rating from today’s multiple. That is 26.2% above the current price and above the 52-week high of Rs 485.80, so the stock would have to set a fresh 52-week high. The downside risk level is Rs 335, which assumes flat EPS and a PE of 16.98, 20% lower than today. It sits 17.1% below the current price and above the 52-week low of Rs 219.90, and it marks a risk to watch, not a target.

What are the main risks to the Talbros Automotive Components price target?

Ans. Four risks matter most for the Talbros Automotive Components share price target: slower revenue or profit growth, a PE de-rating, thin liquidity or size risk, and weakness in the broader market. With a market capitalisation of Rs 2,584 crore, the stock can move sharply on small volumes, and exits can take longer than entries. A fall to the downside-risk PE of 16.98 would cut the price even if earnings hold.

What is the PE ratio of Talbros Automotive Components and how does it compare with the industry?

Ans. The PE ratio of Talbros Automotive Components is 21.22, against an industry PE of 36.96, which is a discount to the industry. Price to book is 2.96 and return on equity is 14.01%, and the PE equals an earnings yield of 4.7%. The base case holds the PE unchanged, so the Talbros Automotive Components share price target moves only with earnings, while the bull and downside scenarios change the multiple by +15% and -20%.

Who owns Talbros Automotive Components, and what is the promoter holding?

Ans. Promoters held 58.43% of Talbros Automotive Components in September 2026. FII held 1.71%, DII held 0.19% and the public held 39.67%. Together the two institutional groups hold 1.90%. Shareholding is filed every quarter, so it is worth rechecking after each result.

What were Talbros Automotive Components’ latest quarterly results?

Ans. In the September 2026 quarter, Talbros Automotive Components reported revenue of Rs 267.49 crore (up 23.3% year on year) and net profit of Rs 32.94 crore (up 42.6%). For comparison, FY26 full-year revenue growth was 5.2% and net profit moved up 10.3%. Each new quarter either supports or weakens the EPS growth of 0.0% assumed in the base case.



Stock Market
Author: Ankit Jaiswal
Ankit Jaiswal is the Senior Research Analyst at Univest, leading the platform's in-house equity research desk and serving as the editorial reviewer for all research and blog content published at univest.in. With 11+ years of experience in Indian equity markets, he oversees stock recommendations, earnings analysis, sector coverage, and ensures every published article meets SEBI Research Analyst Regulations. He holds a Bachelor of Commerce (B.Com) from St. Xavier's College, Kolkata — one of India's most prestigious commerce institutions — and has cleared CMT Level 2 from the CMT Association, a globally recognised certification in technical analysis and market research. His research methodology combines fundamental analysis (earnings quality, balance sheet strength, management commentary) with advanced technical analysis (chart patterns, momentum indicators, market structure) — giving Univest's retail investors a dual-lens approach that most Indian research platforms lack. Ankit is among the most comprehensively certified analysts in Indian financial media, holding five NISM certifications: Series-XV (Research Analyst), Series-VIII (Equity Derivatives), Series-VII (SORM), Series-VI (Depository Operations), and Series-V-A (Mutual Fund Distributors). At Univest — India's SEBI-registered research and advisory platform — Ankit's responsibilities include leading the research team, finalising stock recommendations published across Pro Lite, Pro Super, and Pro Gold advisory services, and maintaining editorial oversight of all YMYL financial content published on the blog.

Leave a Reply Cancel reply