Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM): Tainwala Chemicals & Plastics Share Price Rises 17.53% as Micro Cap Stock Enters Top Gainers

Tainwala Chemicals & Plastics Share Price stood at Rs 237, up 17.53% today, taking the company’s market capitalisation to Rs 188.82 crore.

Tainwala Chemicals & Plastics Share Price jumped to Rs 237 on 11 August 2026, a rise of 17.53% from the previous close of Rs 201.65, pushing the company’s market capitalisation to Rs 188.82 crore. In Stock Market Today activity, that move put the plastic products company among the notable top gainers today in the micro-cap basket. The data confirms a sharp same-day price rise, while also showing a highly concentrated trading pattern with total volume of 111 shares and turnover of 0 crore.

For investors searching Tainwala Chemicals & Plastics Share Price Today, the headline fact is straightforward: the stock opened at Rs 237 and traded at the same level for the day’s open, high and low at the time captured by the event data. That makes this a clear price reset versus the previous close rather than an intraday swing between multiple levels. Univest notes that the supplied data confirms the price event, but it does not establish a company-specific catalyst behind today’s move.

Why is the stock trending in Tainwala Chemicals & Plastics Stock News and Tainwala Chemicals & Plastics News Today searches? First, the 17.53% share price gain is large enough to put the stock in focus. Second, the company sits in the Plastic Products industry, where valuation and profitability metrics can be compared directly with a broad same-industry benchmark of 136 companies. Third, the market is also likely to watch whether this price action is supported by improving fundamentals, sector positioning or only a narrow trading burst. That mix is what makes this Tainwala Chemicals & Plastics Share Price Update relevant for market watchers on Univest.

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) Share Price Today: Price Action Analysis

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) traded at Rs 237. versus the previous close of Rs 201.65, a rise of 17.53%. The stock opened at Rs 237, reached Rs 237, touched Rs 237. Reported volume was 1.

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) Fundamental Analysis

Tainwala Chemicals & Plastics (India) Ltd. was valued at a P/E ratio of 23.61x, a P/B ratio of 1.1x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of -0.35% and ROCE of -0.31%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 8.54, dividend yield of 0%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

Tainwala Chemicals & Plastics Fundamental Analysis begins with scale. The company’s market capitalisation stands at Rs 188.82 crore, placing it firmly in the micro-cap segment. Market cap indicates company size rather than business quality, but it matters because smaller companies can see larger percentage price moves on relatively modest trading activity. That context is especially relevant to today’s Tainwala Chemicals & Plastics Share Price Rise.

On valuation, the stock is trading at a price-to-earnings ratio of 23.61 and a price-to-book ratio of 1.10. Those two numbers offer a mixed starting point. A P/E of 23.61 means the market is valuing the company at 23.61 times earnings per share, while the P/B of 1.10 shows the stock is priced only modestly above its accounting net worth. EPS is Rs 8.54, which gives a direct earnings base behind the current share price. Dividend yield is 0, which means the stock is not offering a current historical yield at the supplied price point.

Profitability metrics are weaker than the valuation ratios alone might suggest. ROE is -0.35 and ROCE is -0.31. Since ROE measures return on shareholder equity and ROCE measures return generated on capital employed, both figures being negative indicates that, on the supplied data, returns are currently below zero rather than strongly profitable. That is an important balancing factor when reading Tainwala Chemicals & Plastics Stock Analysis. A stock can still record a strong same-day price gain even when profitability ratios are soft, but the underlying quality picture becomes more nuanced.

From a financial-analysis perspective, the stock therefore combines a mid-range earnings multiple, a low-to-moderate book multiple and negative return ratios. That makes today’s price action interesting, but not self-explanatory. Univest would frame this as a case where investors may be responding to market activity first, while the fundamental profile remains mixed. To understand that more fully, it helps to compare the company not only with itself, but with its wider Plastic Products benchmark and listed peers tracked on Univest.

Sector and Industry Context

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) is classified under sector: Plastic Products and industry: Plastic Products.

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) has a P/E ratio of 23.61x, which is above the benchmark median of 19.77x, a difference of +19.42%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) has a ROE of -0.35%, which is below the benchmark median of 7.62%, a difference of -104.59%. Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) has a ROCE of -0.31%, which is below the benchmark median of 9.89%, a difference of -103.13%.

Track today’s top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

The Plastic Products benchmark provides the clearest context for judging whether today’s move has broader valuation support. Tainwala Chemicals & Plastics operates in the Plastic Products sector and industry, and the supplied sector snapshot compares it with a same-industry benchmark of 136 companies. That broad sample matters because it lets investors place the company’s valuation and profitability ratios against median, average and range figures rather than looking at them in isolation.

The company’s P/E ratio is 23.61. Within the benchmark, P/E data is available for 111 companies, with a median of 19.77, an average of 38.78, a minimum of 0.39 and a maximum of 349.26. That places Tainwala Chemicals & Plastics above the benchmark median but below the benchmark average. In plain terms, the stock is not among the cheapest names on earnings compared with the industry median, but it is also far from the upper end of the industry’s valuation spread.

On price-to-book, the company’s P/B ratio of 1.10 sits below the benchmark median of 1.48 and below the benchmark average of 1.93, based on 136 companies. That suggests the stock is valued more conservatively on book value than a typical name in the same industry set. However, valuation alone does not tell the full story because profitability ratios remain soft.

The company’s ROE of -0.35 is below both the benchmark median of 7.62 and the benchmark average of 11.53, based on 134 companies. Its ROCE of -0.31 is also below the median of 9.89 and average of 9.33 across 134 companies. Meanwhile, its market capitalisation of Rs 188.82 crore stands above the industry median market cap of Rs 103.26 crore, though below the average of Rs 332.54 crore. So, in sector terms, Tainwala Chemicals & Plastics Share Price Today reflects a company that is larger than the median industry player by market cap, more conservatively priced on book value, slightly above median on P/E, but notably below benchmark profitability levels.

Peer Comparison

Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) has a P/E ratio of 23.61x compared with the displayed peer median of 26.71x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of -0.35% compares with a peer median of 10.21% across the companies shown in the table. ROCE stood at -0.31% versus the displayed peer median of 13.83%, providing a capital-efficiency comparison. Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) has a market capitalisation of Rs 188.82 crore. Among the 5 peers shown, 5 have a larger market capitalisation.

Peer comparison helps sharpen the picture further. Against large listed names within the supplied Plastic Products set, Tainwala Chemicals & Plastics remains much smaller by market cap than peers such as Prince Pipes and Fittings at Rs 2,994.55 crore, Ddev Plastiks Industries at Rs 2,952.71 crore, Nilkamal at Rs 2,609.73 crore and Xpro India at Rs 2,582.45 crore. Even Tarsons Products, the smallest among the highlighted peers, stands at Rs 1,671.74 crore, still far above Tainwala Chemicals & Plastics at Rs 188.82 crore.

On valuation, Tainwala Chemicals & Plastics has a P/E of 23.61. That is lower than Prince Pipes at 29.33, Xpro India at 76.77, EPACK PREFAB TECHN at 26.71 and Tarsons Products at 84.59. It is, however, higher than Ddev Plastiks at 14.63, Nilkamal at 20.71, Cosmo First at 14.57 and Jai Corp at 11.05. This positions the company roughly in the middle of the peer valuation band rather than at either extreme.

The return profile is where the contrast becomes sharper. Tainwala Chemicals & Plastics reports ROE of -0.35 and ROCE of -0.31. Those figures are lower than Prince Pipes, Nilkamal, Xpro India, EPACK PREFAB TECHN, Cosmo First, Apollo Pipes, Jain Irrigation, Jai Corp and Tarsons Products on both metrics. Ddev Plastiks is the only listed peer in this set with weaker ROE at -53.85 and weaker ROCE at -4.05. That means Tainwala Chemicals & Plastics is not screened as a return leader within the supplied peer basket.

On P/B, the company’s 1.10 is lower than Prince Pipes at 1.78, Ddev Plastiks at 2.91, Nilkamal at 1.61, Xpro India at 3.27, EPACK PREFAB TECHN at 3.36, Cosmo First at 1.47, Apollo Pipes at 2.87, Jai Corp at 1.32 and Tarsons Products at 2.47. Only Jain Irrigation, at 0.35, trades lower on this measure among the named peers. The peer view therefore adds depth to Tainwala Chemicals & Plastics Fundamental Analysis: the stock is relatively lower on book valuation, middle-of-pack on earnings valuation and weak on profitability metrics.

Why Investors Are Watching Tainwala Chemicals & Plastics

Tainwala Chemicals & Plastics is being watched because today’s 17.53% price rise is large enough to stand out in Share Market Today screens, yet the supporting data creates a more layered picture than the headline move alone suggests. The stock has become one of the market movers in its micro-cap bracket, but volume, valuation and sector benchmarking all add nuance. For readers following Tainwala Chemicals & Plastics Share Price Live, the move is important precisely because the stock’s financial ratios and industry positioning do not make the story one-dimensional.

• Verified price action: the stock rose Rs 35.35 from Rs 201.65 to Rs 237, a gain of 17.53%.
• Trading pattern: open, high and low were all Rs 237, indicating a flat captured intraday band after the gap from the previous close.
• Volume context: total volume was 111 shares, including 1 share on BSE and 110 on NSE.
• Valuation context: P/E is 23.61 and P/B is 1.10.
• Profitability context: ROE is -0.35 and ROCE is -0.31.
• Sector positioning: P/E is above the industry median of 19.77, while P/B is below the industry median of 1.48.

What should investors monitor next? The first question is whether Tainwala Chemicals & Plastics Share Price can attract broader trading participation beyond the very small traded quantity seen in the supplied data. The second is whether future Tainwala Chemicals & Plastics Financial Results, earnings quality and return ratios improve enough to narrow the gap with sector profitability benchmarks. Univest readers may also track whether the stock continues appearing in Stocks in News and Stocks Rising Today screens or fades after a one-session move.

About Tainwala Chemicals & Plastics

Tainwala Chemicals & Plastics (India) Ltd. is classified within the Plastic Products sector and industry. The supplied company context does not extend into business segments or product-level revenue mix, so the most reliable way to understand its operating space is through that industry classification. In market terms, it belongs to a broad listed group of 136 same-industry companies captured in the benchmark set, ranging from very small firms to players with market capitalisation near Rs 2,994.55 crore.

That placement matters because Plastic Products as a listed industry includes businesses serving varied end markets, and valuation levels can differ sharply across the group. Within this context, Tainwala Chemicals & Plastics has a market cap of Rs 188.82 crore, above the benchmark median of Rs 103.26 crore but well below the larger listed peers referenced in this article. Its current ratios also show that it is not positioned like the sector’s stronger profitability names, even though its book-value multiple is lower than many peers.

For investors researching Tainwala Chemicals & Plastics Company News, the company’s current stock-market profile is therefore defined less by scale leadership and more by where it sits inside the industry valuation and return spectrum. That is why today’s price action has drawn attention on Univest: the market move is sharp, but the business profile, based on supplied numbers, still needs to be interpreted through sector and peer context rather than headline percentage gain alone.

Track Tainwala Chemicals & Plastics Share Price on Univest

Use Tainwala Chemicals & Plastics (India) Ltd. (TAINWALCHM) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Investors using Univest can track Tainwala Chemicals & Plastics Share Price through live market updates, ratio-based stock analysis and structured company-level insights. That includes monitoring Tainwala Chemicals & Plastics Share Price Today, 52-week level tracking where available, market capitalisation changes, valuation ratios such as P/E and P/B, profitability markers like ROE and ROCE, and industry benchmarking against listed peers.

Univest also helps users follow Tainwala Chemicals & Plastics Latest News, market-mover screens, shareholding pattern updates when disclosed, and broader NSE News and BSE News developments connected to the stock. For a micro-cap name that has entered the Top Gainers Today conversation, having price action and fundamental context in one place can help investors monitor the stock objectively without reducing the story to a single-session move.

Frequently Asked Questions

Why is Tainwala Chemicals & Plastics Share Price in focus today?

Ans. Tainwala Chemicals & Plastics Share Price is in focus because the stock rose 17.53% to Rs 237 from the previous close of Rs 201.65, making it one of the notable micro-cap top gainers in today’s market action.

What is Tainwala Chemicals & Plastics Share Price Today?

Ans. Tainwala Chemicals & Plastics Share Price Today is Rs 237 based on the supplied event data. That level was also the day’s open, high and low, while the previous close stood at Rs 201.65.

How much did Tainwala Chemicals & Plastics stock rise today?

Ans. The stock rose by Rs 35.35 in absolute terms and 17.53% in percentage terms. It moved from a previous close of Rs 201.65 to Rs 237, which is the latest price captured in the event.

What is the market capitalisation of Tainwala Chemicals & Plastics?

Ans. Tainwala Chemicals & Plastics has a market capitalisation of Rs 188.82 crore. That places it in the Micro Cap category and above the Plastic Products industry median market cap of Rs 103.26 crore.

What does today’s volume data show for Tainwala Chemicals & Plastics?

Ans. The supplied volume data shows very light activity. Total volume was 111 shares, with 1 share on BSE and 110 shares on NSE, while turnover was reported at 0 crore at the captured time.

Is Tainwala Chemicals & Plastics expensive compared with its industry on P/E?

Ans. Its P/E ratio is 23.61, which is above the same-industry median of 19.77 but below the average of 38.78 across 111 companies with available P/E data in the Plastic Products benchmark.

How does Tainwala Chemicals & Plastics compare on price-to-book?

Ans. The company’s P/B ratio is 1.10. That is below the Plastic Products benchmark median of 1.48 and below the average of 1.93, suggesting a lower book-value multiple than many same-industry companies.

What do the ROE and ROCE figures indicate for Tainwala Chemicals & Plastics?

Ans. ROE stands at -0.35 and ROCE at -0.31. Both are below the industry medians of 7.62 and 9.89 respectively, which indicates weaker profitability than the broader Plastic Products benchmark on supplied data.

What are the key fundamental ratios for Tainwala Chemicals & Plastics?

Ans. Key supplied ratios include a P/E of 23.61, P/B of 1.10, EPS of Rs 8.54, ROE of -0.35, ROCE of -0.31 and dividend yield of 0, offering a mixed fundamental picture.

How does Tainwala Chemicals & Plastics compare with major Plastic Products peers?

Ans. Tainwala Chemicals & Plastics is much smaller than peers like Prince Pipes, Nilkamal and Xpro India by market cap. Its P/E is mid-range within the peer set, while its ROE and ROCE trail most named peers.