Is Prince Pipes and Fittings the Best Stock in Its Sector? A Look at the Numbers
- October 6, 2026
- Posted by: Lakshit Sharma
- Category: Market
Prince Pipes and Fittings CMP Rs 249 (06 Oct 2026). Market cap Rs 2,734 Cr. ROE 4.45%. P/E 26.76x versus Industry P/E 39.16x.
Quick Answer
Prince Pipes and Fittings is one of the names investors compare when screening the Plastic Products sector, built on a 4.45% return on equity and a P/E of 26.76x against an Industry P/E of 39.16x. Whether Prince Pipes and Fittings is the best stock in its sector depends on whether an investor is optimising for return ratios, valuation, or both. This article breaks down the metrics, including a comparison against named Plastic Products sector peers, so you can judge that for yourself.
Is Prince Pipes and Fittings the best stock in its sector? The stock trades on the NSE at Rs 249 as of 06 October 2026, within its 52-week range of Rs 205.00 to Rs 352.20. Prince Pipes and Fittings Ltd manufactures PVC, CPVC and HDPE pipes and fittings for plumbing, agriculture and drainage.
Prince Pipes and Fittings sits in the Plastic Products sector, and its 4.45% ROE and 26.76x P/E give a starting point for judging where it stands against comparable listed names. The rest of this article compares those numbers against verified peers and the sector’s Industry P/E benchmark.
Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers
Click Here – Get Free Investment Predictions
About Prince Pipes and Fittings
Prince Pipes and Fittings Ltd manufactures PVC, CPVC and HDPE pipes and fittings for plumbing, agriculture and drainage. The stock rose about 0.7 percent during this session and is trading about 29 percent below its 52-week high, and the P/E shown reflects the previous close. At a market capitalisation of Rs 2,734 Cr, it is tracked as part of the Plastic Products sector on Univest.
Is Prince Pipes and Fittings the Best Stock in Its Sector?
Prince Pipes and Fittings makes its case as the best stock in its sector primarily on valuation relative to its Industry P/E, combining a 4.45% ROE with a 26.76x P/E against the sector’s 39.16x Industry P/E. Prince Pipes and Fittings’ 26.76x P/E is below the 39.16x Industry P/E, but a 4.45% ROE is thin and its multiple is well above that of Prakash Pipes in this comparison, so the valuation is not backed by strong current returns.
| Metric | Prince Pipes and Fittings |
|---|---|
| CMP (NSE) | Rs 249.15 |
| 52-Week High / Low | Rs 352.20 / Rs 205.00 |
| Market Cap | Rs 2,734 Cr |
| P/E (TTM) vs Industry P/E | 26.76x vs 39.16x |
| P/B | 1.66 |
| ROE | 4.45% |
| EPS (TTM) | Rs 9.24 |
| Dividend Yield | 0.40% |
| Debt to Equity | 0.09 |
Compare Prince Pipes and Fittings Against Other Plastic Products Sector Stocks
How Prince Pipes and Fittings Compares Against Its Plastic Products Sector Peers
The table below sets Prince Pipes and Fittings against 2 other Plastic Products sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.
| Company | Market Cap (Rs Cr) | P/E | ROE | Debt to Equity |
|---|---|---|---|---|
| Prince Pipes and Fittings | 2,734 | 26.76 | 4.45% | 0.09 |
| Prakash Pipes | 582 | 11.80 | 9.04% | 0.04 |
| Pyramid Technoplast | 589 | 18.80 | 10.42% | 0.67 |
| Peer average (2 companies) | – | 15.30 | 9.73% | 0.36 |
Against this peer set, Prince Pipes and Fittings’s 4.45% ROE is below the 9.73% peer average, and its P/E of 26.76x runs above the peer average of 15.30x. Prince Pipes and Fittings’ 26.76x P/E is below the 39.16x Industry P/E, but a 4.45% ROE is thin and its multiple is well above that of Prakash Pipes in this comparison, so the valuation is not backed by strong current returns.
What Makes Prince Pipes and Fittings Worth Watching in Plastic Products
- Below Industry P/E: A 26.76x P/E against a 39.16x Industry P/E is a discount, though the ROE of 4.45% is thin.
- Near debt free: A debt to equity ratio of 0.09 gives Prince Pipes and Fittings significant balance sheet flexibility.
- Established pipe brand: A broad range of PVC, CPVC and HDPE pipes and fittings gives Prince Pipes and Fittings a recognised brand across plumbing, agriculture and drainage.
Prince Pipes and Fittings Valuation: Is It Justified?
Prince Pipes and Fittings’ 26.76x P/E is below the 39.16x Industry P/E, but a 4.45% ROE is thin and its multiple is well above that of Prakash Pipes in this comparison, so the valuation is not backed by strong current returns. As with any single stock, investors should weigh this against their own valuation discipline and risk appetite rather than the sector label alone.
Also read – Is Precot the Best Stock in Its Sector? A Look at the Numbers
Download the Univest iOS App or Univest Android App to track Prince Pipes and Fittings and other Plastic Products sector stocks.
How to Track Prince Pipes and Fittings Before You Invest
Before deciding whether Prince Pipes and Fittings deserves its label as the best stock in its sector for your own portfolio, compare it directly against Plastic Products sector peers using the steps below.
- Open the Univest Screener and search for Prince Pipes and Fittings to view live price, valuation ratios, and peer comparisons within the Plastic Products sector.
- Compare its P/E, P/B, and ROE against other Plastic Products sector stocks before deciding if the current valuation fits your strategy.
- Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
- Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.
Conclusion
Prince Pipes and Fittings is worth researching mainly on valuation, with a P/E of 26.76x against a 39.16x Industry P/E, but a 4.45% ROE is modest, so the case for calling it the best stock in its sector rests on more than current returns. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Is Prince Pipes and Fittings the best stock in its sector?
Ans. Prince Pipes and Fittings has a 4.45% ROE and trades at 26.76x P/E against a 39.16x Industry P/E, and compares below the peer average ROE of 9.73% in this article’s named comparison, so the answer depends on what an investor is prioritising.
What is the current share price of Prince Pipes and Fittings?
Ans. Prince Pipes and Fittings was trading at Rs 249.15 on the NSE as of 06 October 2026, within its 52-week range of Rs 205.00 to Rs 352.20.
What sector does Prince Pipes and Fittings belong to?
Ans. Prince Pipes and Fittings is classified under the Plastic Products sector on Univest.
How does Prince Pipes and Fittings compare to its sector peers on P/E?
Ans. Prince Pipes and Fittings’s P/E of 26.76x is above the 15.30x average of the 2 named peers compared in this article.
What is Prince Pipes and Fittings’s return on equity?
Ans. Prince Pipes and Fittings reported a return on equity of 4.45%, which is below the 9.73% average of its named peers in this comparison.
Should I invest in Prince Pipes and Fittings based on its sector position?
Ans. Prince Pipes and Fittings’s sector position and metrics make it worth researching further, but any investment decision should factor in your own risk appetite, its valuation relative to peers, and independent research or advice from a SEBI-registered advisor.
{“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “Is Prince Pipes and Fittings the best stock in its sector?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings has a 4.45% ROE and trades at 26.76x P/E against a 39.16x Industry P/E, and compares below the peer average ROE of 9.73% in this article’s named comparison, so the answer depends on what an investor is prioritising.”}}, {“@type”: “Question”, “name”: “What is the current share price of Prince Pipes and Fittings?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings was trading at Rs 249.15 on the NSE as of 06 October 2026, within its 52-week range of Rs 205.00 to Rs 352.20.”}}, {“@type”: “Question”, “name”: “What sector does Prince Pipes and Fittings belong to?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings is classified under the Plastic Products sector on Univest.”}}, {“@type”: “Question”, “name”: “How does Prince Pipes and Fittings compare to its sector peers on P/E?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings’s P/E of 26.76x is above the 15.30x average of the 2 named peers compared in this article.”}}, {“@type”: “Question”, “name”: “What is Prince Pipes and Fittings’s return on equity?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings reported a return on equity of 4.45%, which is below the 9.73% average of its named peers in this comparison.”}}, {“@type”: “Question”, “name”: “Should I invest in Prince Pipes and Fittings based on its sector position?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Prince Pipes and Fittings’s sector position and metrics make it worth researching further, but any investment decision should factor in your own risk appetite, its valuation relative to peers, and independent research or advice from a SEBI-registered advisor.”}}]}