National Plastic Technologies Ltd. (NATPLASTI): National Plastic Technologies Share Price Rises 11.83% as Micro Cap Stock Turns Top Gainer

National Plastic Technologies share price today stood at Rs 260, up 11.83%, taking its market capitalisation to Rs 141.32 crore.

National Plastic Technologies Share Price moved to Rs 260 on 11 August 2026, a same-day gain of Rs 27.5 or 11.83% from the previous close of Rs 232.5. With a market capitalisation of Rs 141.32 crore, the stock sits in the Micro Cap category, and that makes today’s move notable in Stock Market Today screens tracking sharp percentage gainers. The supplied data confirms the price rise clearly, even though it does not establish a company-specific catalyst behind the move.

For investors tracking National Plastic Technologies Share Price Today, the early session setup was unusual because the stock opened at Rs 260 and also recorded a day high of Rs 260 and a day low of Rs 260. That means the available data shows the stock locked at one traded level during the captured period. On BSE, the reported volume was 1 share, total volume was also 1, and turnover stood at Rs 0 crore, so the price action was sharp in percentage terms but very light in participation terms.

Why is the stock trending in today’s National Plastic Technologies Stock News? The answer from verified data is straightforward: the share price gain itself was large enough to place the company among top gainers in the micro-cap space. Important financial metrics also add context. The stock trades at a P/E ratio of 14.86 and P/B ratio of 2.23, while ROE stands at 5.05, ROCE at 8.04, EPS at Rs 15.65 and dividend yield at 0.65%. Investors should monitor whether price action is followed by broader trading participation, and how valuation and profitability compare with the wider Plastic Products industry, a point Univest examines in detail below.

National Plastic Technologies Ltd. (NATPLASTI) Share Price Today: Price Action Analysis

National Plastic Technologies Ltd. (NATPLASTI) traded at Rs 260. versus the previous close of Rs 232.5, a rise of 11.83%. The stock opened at Rs 260, reached Rs 260, touched Rs 260. Reported volume was 1.

National Plastic Technologies Ltd. (NATPLASTI) Fundamental Analysis

National Plastic Technologies Ltd. was valued at a P/E ratio of 14.86x, a P/B ratio of 2.23x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of 5.05% and ROCE of 8.04%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 15.65, dividend yield of 0.65%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

National Plastic Technologies Fundamental Analysis shows a micro-cap company with moderate valuation multiples and profitability metrics that sit below several broader industry benchmarks. The numbers do not tell investors why the stock rose today, but they do provide useful context on valuation, earnings power and return ratios.

At a market capitalisation of Rs 141.32 crore, National Plastic Technologies is firmly in the micro-cap segment. Market capitalisation indicates company size rather than business quality, but size often shapes trading behaviour, liquidity patterns and peer comparison. The stock’s P/E ratio stands at 14.86, while its P/B ratio is 2.23. On earnings, EPS is Rs 15.65, which means the current share price of Rs 260 is being valued at 14.86 times earnings per share based on the supplied data. In practical terms, that puts the stock on a lower earnings multiple than several larger names in the same Plastic Products industry, although valuation alone cannot explain today’s share price rise.

Profitability ratios present a more mixed picture. ROE is 5.05, indicating the return generated on shareholder equity is modest. ROCE is 8.04, showing the return on total capital employed is also moderate rather than standout. Those figures matter because when investors scan National Plastic Technologies Stock Analysis, they usually want to know whether market interest is backed by efficient capital use. Based strictly on the supplied numbers, the company is profitable enough to support a positive P/E ratio, but its return ratios are not especially high relative to many listed manufacturing businesses.

The P/B ratio of 2.23 suggests the stock trades at more than twice its book-linked accounting net worth. While book value per share itself has not been supplied, the multiple still helps frame valuation. EPS at Rs 15.65 adds further clarity because it ties the current price to actual earnings rather than only asset value. Dividend yield is 0.65%, which indicates a modest historical or current cash payout relative to the market price. That yield is not high enough by itself to define the stock as an income play, but it does show the company has some payout history built into the data.

Overall, Univest reads the supplied fundamentals as neither distressed nor richly priced on earnings alone. Instead, National Plastic Technologies Share Price appears to be attracting attention because of the day’s sharp move, while the underlying metrics point to a company with measured profitability and mid-range valuation within its space. That makes sector and peer comparison especially important.

Sector and Industry Context

National Plastic Technologies Ltd. (NATPLASTI) is classified under sector: Plastic Products and industry: Plastic Products.

National Plastic Technologies Ltd. (NATPLASTI) has a P/E ratio of 14.86x, which is below the benchmark median of 19.77x, a difference of -24.84%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

National Plastic Technologies Ltd. (NATPLASTI) has a ROE of 5.05%, which is below the benchmark median of 7.62%, a difference of -33.73%. National Plastic Technologies Ltd. (NATPLASTI) has a ROCE of 8.04%, which is below the benchmark median of 9.89%, a difference of -18.71%.

Track today’s top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

The sector snapshot places National Plastic Technologies inside the Plastic Products industry, where benchmark data from 136 companies provides a useful frame for valuation and profitability. On that basis, the company looks cheaper than the industry on P/E, but less efficient than the median business on ROE and ROCE.

The supplied sectorSnapshot uses the benchmark scope of the same industry and covers 136 companies. Within that group, National Plastic Technologies carries a company P/E of 14.86. That sits below the industry median P/E of 19.77 and far below the average P/E of 38.78. The full industry P/E range is wide, stretching from 0.39 to 349.26 across 111 companies with available P/E data. That range matters because it shows how dispersed valuations are inside Plastic Products, with some stocks priced very conservatively and others at much richer multiples.

On price-to-book, the company’s P/B is 2.23. That is above the industry median P/B of 1.48 and also above the average P/B of 1.93 across 136 companies. The reported P/B range runs from -6.18 to 17.59, again highlighting how broad this segment is. So while National Plastic Technologies Share Price does not look expensive on earnings relative to the industry median, it does trade at a somewhat higher book-value multiple than the median and average company in the same group.

Profitability comparisons are equally useful. The company’s ROE is 5.05 versus an industry median of 7.62 and average of 11.53 across 134 companies. Its ROCE is 8.04 against a median of 9.89 and average of 9.33 across 134 companies. That places returns below the median on both measures, though the ROCE gap to the industry average is not especially large. Market-cap context also matters: National Plastic Technologies, at Rs 141.32 crore, is above the industry median market capitalisation of Rs 103.26 crore but below the industry average of Rs 332.54 crore, with the full range extending from Rs 4.02 crore to Rs 2,994.55 crore.

For readers following National Plastic Technologies Share Price News on Univest, the sector takeaway is balanced. Valuation on P/E looks comparatively restrained, but profitability metrics are softer than the industry’s central tendency. That is why peer comparison matters before drawing broad conclusions from today’s top gainer move.

Peer Comparison

National Plastic Technologies Ltd. (NATPLASTI) has a P/E ratio of 14.86x compared with the displayed peer median of 26.71x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of 5.05% compares with a peer median of 10.21% across the companies shown in the table. ROCE stood at 8.04% versus the displayed peer median of 13.83%, providing a capital-efficiency comparison. National Plastic Technologies Ltd. (NATPLASTI) has a market capitalisation of Rs 141.32 crore. Among the 5 peers shown, 5 have a larger market capitalisation.

Peer comparison shows National Plastic Technologies is much smaller than the leading listed names in Plastic Products, while its valuation and return profile sits in the lower-to-middle part of the peer set rather than at either extreme. The strongest contrast is size: peers in the supplied list range from Rs 1,671.74 crore to Rs 2,994.55 crore in market capitalisation, far above National Plastic Technologies at Rs 141.32 crore.

On valuation, National Plastic Technologies trades at a P/E of 14.86. That is close to Ddev Plastiks Industries at 14.63 and Cosmo First at 14.57, above Jai Corp at 11.05, and well below Prince Pipes and Fittings at 29.33, Nilkamal at 20.71, EPACK PREFAB TECHN at 26.71, Xpro India at 76.77 and Tarsons Products at 84.59. This tells investors that the stock is not being valued at the richer end of the peer universe on earnings.

Price-to-book comparison is somewhat different. National Plastic Technologies has a P/B of 2.23, which is above Prince Pipes at 1.78, Nilkamal at 1.61, Cosmo First at 1.47, Jain Irrigation Systems at 0.35 and Jai Corp at 1.32. It is below Ddev Plastiks at 2.91, Xpro India at 3.27, EPACK PREFAB TECHN at 3.36 and Apollo Pipes at 2.87. That places it roughly in the middle of the pack on asset-based valuation.

Return ratios are less impressive relative to peers. National Plastic Technologies posts ROE of 5.05 and ROCE of 8.04. Those figures are lower than Prince Pipes at 23.65 ROE and 28.73 ROCE, Nilkamal at 7.13 and 10.95, Xpro India at 40.04 and 22.21, EPACK PREFAB TECHN at 10.21 and 13.83, Cosmo First at 39 and 30.79, Apollo Pipes at 13.19 and 16.68, Jai Corp at 6.65 and 9.48, and Tarsons Products at 28.19 and 34.25. They are above Jain Irrigation Systems on ROE at 4.07 and ROCE at 4.93, and above Ddev Plastiks on both metrics because that company shows ROE of -53.85 and ROCE of -4.05.

The peer picture therefore supports a measured reading of National Plastic Technologies Share Price Rise. The stock is cheaper than several larger peers on P/E, but it does not match the stronger profitability levels seen in many of them. Univest sees that as a reason to watch follow-through carefully rather than read too much into one session’s price action alone.

Why Investors Are Watching National Plastic Technologies

Investors are watching National Plastic Technologies because today’s move was large enough to put the stock on top-gainer radars, while its valuation and industry position create enough context for deeper review. In market news terms, this is a stock that moved sharply, but with fundamentals that call for comparison rather than quick assumptions.

• Verified price action: National Plastic Technologies Share Price rose 11.83% from Rs 232.5 to Rs 260, a gain of Rs 27.5 in one session.
• Trading pattern: The stock opened, hit the day high and day low at Rs 260, showing a single reported traded level in the captured data.
• Volume backdrop: BSE volume, current volume and total volume were all 1 share, while turnover was Rs 0 crore.
• Valuation context: P/E at 14.86 is below the industry median of 19.77, but P/B at 2.23 is above the industry median of 1.48.
• Profitability context: ROE of 5.05 and ROCE of 8.04 are below the industry medians of 7.62 and 9.89 respectively.

What should investors monitor next? The key variables are whether National Plastic Technologies Share Price Today continues to hold gains with broader trading participation, whether future Stock Updates show a more normal volume pattern, and whether the stock’s relative valuation remains supported against larger Plastic Products peers. Univest also flags the importance of tracking whether the company’s lower-than-median profitability metrics improve over time, because that is often central to how the market values smaller industrial names.

About National Plastic Technologies

National Plastic Technologies operates in the Plastic Products sector and industry, based on the supplied classification. That places the company inside a broad listed universe where businesses can range from pipes and fittings to packaging, moulded products, engineered polymer applications and other plastic-based manufacturing activities. While the supplied data set does not provide a detailed business description, the sector label is still useful because it puts the company in an industrial manufacturing category where valuation, return ratios and market-cap positioning often vary widely across listed names.

The industry comparison in this article shows just how broad that range is. Within the same Plastic Products benchmark group, market capitalisations extend from Rs 4.02 crore to Rs 2,994.55 crore, and P/E multiples run from 0.39 to 349.26. That means a micro-cap company such as National Plastic Technologies can trade very differently from larger peers even while remaining in the same sector label. In today’s National Plastic Technologies Latest News cycle, that context matters because a sharp share price gain in a smaller company does not automatically imply the same valuation structure or profitability profile seen in larger industry leaders.

For readers using Univest for National Plastic Technologies Company News and stock analysis, the most grounded way to understand the business right now is through its sector identity, its micro-cap market position and its current financial ratios. Those data points together define where the company sits within the listed Plastic Products landscape.

Track National Plastic Technologies Share Price on Univest

Use National Plastic Technologies Ltd. (NATPLASTI) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Investors tracking National Plastic Technologies Share Price can use Univest to follow live share price movement, market capitalisation, valuation ratios and broader stock performance in one place. For a stock like this, where today’s percentage move was sharp but the reported trading volume was extremely light, continuous monitoring becomes more useful than looking at the headline move alone.

On Univest, users can track National Plastic Technologies Share Price Today alongside P/E, P/B, ROE, ROCE, EPS, dividend yield, 52-week levels when available and peer comparison within the Plastic Products industry. Univest also helps readers place National Plastic Technologies Stock News in context by comparing price action with sector benchmarks and market-cap positioning, making it easier to follow future share price updates without relying only on one day’s move.

Frequently Asked Questions

Why is National Plastic Technologies share price rising today?

Ans. National Plastic Technologies share price rose because the stock moved from Rs 232.5 to Rs 260 in the current session, a gain of Rs 27.5 or 11.83%. The supplied data confirms the price rise but does not establish a company-specific.

What is the National Plastic Technologies share price today?

Ans. National Plastic Technologies share price today is Rs 260. The stock’s previous close was Rs 232.5, so the current move reflects an 11.83% rise. That places the company among notable micro-cap gainers in today’s market action.

How much did National Plastic Technologies stock gain in one day?

Ans. The stock gained Rs 27.5 in absolute terms during the session. On a percentage basis, that equals 11.83%, with the price moving from the previous close of Rs 232.5 to the current level of Rs 260.

What does today’s intraday price data show for the stock?

Ans. The supplied intraday data shows National Plastic Technologies opened at Rs 260, and the day high and day low were also Rs 260. That means the captured session data reflects trading at one reported price level only.

What is the market capitalisation of National Plastic Technologies?

Ans. National Plastic Technologies has a market capitalisation of Rs 141.32 crore. Based on the supplied classification, it falls in the Micro Cap category, which is relevant when comparing today’s price rise with similarly sized listed stocks.

Is National Plastic Technologies expensive based on P/E?

Ans. The stock’s P/E ratio is 14.86. That is below the same-industry median of 19.77 and below the average of 38.78 across 111 companies with P/E data, so earnings valuation looks lower than the broader industry midpoint.

How does the stock compare on P/B, ROE and ROCE?

Ans. National Plastic Technologies has a P/B of 2.23, ROE of 5.05 and ROCE of 8.04. Its P/B is above the industry median of 1.48, while ROE and ROCE are below the medians of 7.62 and 9.89.

What are the key earnings and dividend metrics for the company?

Ans. The supplied data shows EPS at Rs 15.65 and dividend yield at 0.65%. EPS helps explain the stock’s P/E ratio of 14.86, while the dividend yield indicates a modest payout relative to the current share price.

How does National Plastic Technologies compare with major listed peers?

Ans. National Plastic Technologies is far smaller than peers such as Prince Pipes, Nilkamal and Xpro India on market capitalisation. Its P/E of 14.86 is lower than many peers, but its ROE of 5.05 and ROCE of 8.04 trail several larger.

What should investors monitor after this share price rise?

Ans. Investors should watch whether gains hold with broader participation, because current volume, BSE volume and total volume were all 1 share, while turnover was Rs 0 crore. Valuation and profitability versus Plastic Products peers also remain important.