Maximum Drawdown Explained: Formula, Worked Example, How to Read It for Stocks and Funds, Recovery Time and Why It Matters More Than Volatility
- November 19, 2026
- Posted by: Kunal Singla
- Category: Uncategorized
Maximum drawdown = (peak value minus lowest value after the peak) divided by peak value. It shows the worst fall an investor would have faced. A 50% fall needs a 100% gain to recover.
Quick Answer
Maximum drawdown explained simply: it is the largest fall in value from a peak to a later trough before a new peak is reached, calculated as peak minus trough divided by peak. It shows the worst loss an investor would have suffered if they bought at the top and sold at the bottom. A 50% drawdown needs a 100% gain to recover, which is why it is a useful measure of real risk.
Maximum drawdown explained for investors who want to know how bad a stock or fund fall can get: it records the worst peak to trough loss in a period.
This guide covers the formula, a worked example, how to use it for stocks and funds and its limits. It is educational and not a recommendation.
Click Here – Get Free Investment Predictions
Maximum Drawdown Explained: The Formula
Maximum drawdown = (peak value minus trough value) divided by peak value, where the trough is the lowest point after the peak and before a new high.
| Item | Value (illustrative) |
|---|---|
| Peak portfolio value | Rs 1,00,000 |
| Lowest value after the peak | Rs 60,000 |
| Drawdown | (1,00,000 – 60,000) / 1,00,000 = 40% |
Over a long period, there are many drawdowns. The largest one is the maximum drawdown.
Why Recovery Is Harder Than the Fall
| Fall | Gain needed to recover |
|---|---|
| 10% | 11% |
| 20% | 25% |
| 30% | 43% |
| 50% | 100% |
| 70% | 233% |
This is why deep falls hurt so much. A 50% loss needs a 100% gain just to get back to the starting value.
Maximum Drawdown vs Volatility
| Feature | Volatility (standard deviation) | Maximum drawdown |
|---|---|---|
| What it measures | Average swing of returns | Worst fall from a peak |
| Counts upside moves | Yes | No |
| Matches investor experience | Loosely | Closely |
| Shows recovery time | No | Yes, with the recovery period |
Use the Univest Screener to check live fundamentals before you act on any idea.
Two funds can have the same volatility but very different drawdowns. The drawdown tells you the worst loss you would actually have lived through.
How to Use It for Stocks and Funds
- Check the drawdown over five to ten years, including a crash such as 2008 or 2020.
- Compare with the benchmark. The index of the Nifty 50 is a useful reference for large cap funds.
- Compare with peer funds in the same category.
- Check the recovery time, which is the time to reach a new peak.
- Ask whether you could hold through that fall without selling.
Using It With Other Measures
- Calmar ratio: annual return divided by the worst fall. Higher is better.
- Rolling returns: show consistency across periods.
- Sortino ratio: adjusts return for downside swings.
- Stop loss rules: help limit your own drawdown in trading.
Your risk tolerance decides how much drawdown you can live with. An investor with low risk tolerance who sees a 40% fall in a market crash may sell at the bottom, which turns a temporary fall into a permanent loss. Match risk tolerance and investment horizon to the fund: a mutual fund with a peak to trough fall of 20% suits a more cautious investor than one that fell 45%. Recovery time matters as much as the size of the fall, because a long recovery time ties up capital. Check how your risk tolerance compares with the worst fall.
Limits
- It depends on the period chosen. A calm period understates risk.
- It looks backward, and a future fall can be bigger.
- It shows one event, not how often falls occur.
- It uses closing values and may miss intraday falls.
Download the Univest iOS App or Univest Android App to get daily stock research and market updates.
Conclusion
This measure shows the worst peak to trough fall and how long the recovery took. It reflects real investor pain better than volatility does.
Check it over a full market cycle and compare with the benchmark and peers.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Frequently Asked Questions
What is maximum drawdown?
Ans. Maximum drawdown is the largest percentage fall from a peak to a later trough before a new peak. It shows the worst loss an investor would have faced in a period.
How do I calculate maximum drawdown?
Ans. Take the peak value, subtract the lowest value after it, and divide by the peak value. The largest such figure over the period is the drawdown.
What is a good maximum drawdown?
Ans. Lower is better, but it depends on the asset. Compare with the benchmark and peers. A fund with a smaller drawdown than its category in a crash showed better downside control.
How is it different from volatility?
Ans. Volatility measures the average size of swings, up and down. Drawdown measures only the worst fall from a peak, which matches how investors experience losses.
Why does a 50% fall need a 100% gain?
Ans. Because the gain is applied to a smaller base. If Rs 100 falls to Rs 50, you need Rs 50 more, which is 100% of the lower value, to get back to Rs 100.
What is the Calmar ratio?
Ans. The Calmar ratio divides annual return by maximum drawdown. It shows how much return was earned for the worst fall, and a higher figure is better.
Can maximum drawdown predict future losses?
Ans. No. It describes past falls, and a future fall can be larger. Use it to judge whether you can tolerate such a fall and size your investments accordingly.