Is Defrail Technologies the Best Stock in Its Sector? A Look at the Numbers
- October 22, 2026
- Posted by: Ankit Jaiswal
- Category: Market
Defrail Technologies CMP Rs 79.80 (22 Oct 2026). Market cap Rs 56 Cr. ROE 16.71%. P/E 13.98x versus Industry P/E 36.19x.
Quick Answer
Defrail Technologies is one of the names investors compare when screening the Rubber Components sector. Whether it is the best stock in its sector depends on whether an investor prioritises return ratios, valuation or balance sheet strength. This article sets it against two named peers and the sector benchmark so you can judge for yourself.
Is Defrail Technologies the best stock in its sector? The stock trades on the BSE at Rs 79.80 as of 22 October 2026, within its 52-week range of Rs 64.15 to Rs 122.00. The sections below cover the business, the key ratios, a peer comparison and a closer look at valuation.
Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers
Click Here – Get Free Investment Predictions
About Defrail Technologies
Defrail Technologies Ltd manufactures rubber parts and components, and company information says it was incorporated in October 2023. Company information lists rubber hoses and assemblies, rubber profiles and beadings, and rubber moulded parts as its range, sold mainly to automotive, railway, defence and industrial customers on a business to business basis, and describes it as an RDSO approved vendor for Indian Railways. At a market capitalisation of Rs 56 Cr, it is tracked as part of the Rubber Components sector on Univest.
Is Defrail Technologies the Best Stock in Its Sector?
Defrail Technologies makes its case as the best stock in its sector primarily on valuation relative to its Industry P/E, backed by its return on equity. Defrail Technologies’ 13.98x P/E is below the 36.19x Industry P/E, Sundram Fasteners at 38.83x and Endurance Technologies at 35.10x, while its 16.71% ROE is higher than Sundram Fasteners at 13.83% and Endurance Technologies at 13.91%, and its debt to equity ratio of 0.38 is above Sundram Fasteners at 0.15 and Endurance Technologies at 0.19.
| Metric | Defrail Technologies |
|---|---|
| CMP (BSE) | Rs 79.80 |
| 52-Week High / Low | Rs 122.00 / Rs 64.15 |
| Market Cap | Rs 56 Cr |
| P/E (TTM) vs Industry P/E | 13.98x vs 36.19x |
| P/B | 2.34 |
| ROE | 16.71% |
| EPS (TTM) | Rs 5.71 |
| Dividend Yield | 0.00% |
| Debt to Equity | 0.38 |
Compare Defrail Technologies Against Other Rubber Components Sector Stocks
How Defrail Technologies Compares Against Its Rubber Components Sector Peers
The table below sets Defrail Technologies against 2 other Rubber Components sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.
| Company | Market Cap (Rs Cr) | P/E | ROE | Debt to Equity |
|---|---|---|---|---|
| Defrail Technologies | 56 | 13.98 | 16.71% | 0.38 |
| Sundram Fasteners | 23,824 | 38.83 | 13.83% | 0.15 |
| Endurance Technologies | 34,040 | 35.10 | 13.91% | 0.19 |
| Peer average (2 companies) | – | 36.97 | 13.87% | 0.17 |
Measured against the peer averages, Defrail Technologies’ P/E is 62 percent below the 36.97x average, and its ROE is 2.84 percentage points above the 13.87% average. An average of just two companies is a rough guide, so treat the gap as a pointer for further research and not as a verdict.
What Makes Defrail Technologies Worth Watching in Rubber Components
- Scale: At Rs 56 Cr, its market capitalisation is smaller than Sundram Fasteners (Rs 23,824 Cr) and Endurance Technologies (Rs 34,040 Cr), which is a useful reminder that the peers differ in size as well as in valuation.
- Sector drivers: Orders from automotive and railway customers, approvals that keep it on vendor lists and the cost of rubber and other inputs drive revenue and earnings.
- Key risk: A young company relies on a few approved customer relationships, so the loss or delay of an order can matter. Rubber input costs and railway ordering cycles can also make quarterly numbers uneven.
Defrail Technologies Valuation: Is It Justified?
At a P/B ratio of 2.34, the market pays about Rs 2.34 for every rupee of book value, and the EPS (TTM) of Rs 5.71 is the earnings base behind the P/E. The stock trades about 35 percent below its 52-week high and about 24 percent above its 52-week low. The company does not currently show a dividend yield, so returns for shareholders depend mainly on the share price. As with any single stock, investors should weigh these figures against their own valuation discipline and risk appetite rather than the sector label alone.
Also read – Is Oracle Financial Services Software the Best Stock in Its Sector? A Look at the Numbers
Download the Univest iOS App or Univest Android App to track Defrail Technologies and other Rubber Components sector stocks.
How to Track Defrail Technologies Before You Invest
Before deciding whether Defrail Technologies deserves its label as the best stock in its sector for your own portfolio, compare it directly against Rubber Components sector peers using the steps below.
- Open the Univest Screener and search for Defrail Technologies to view live price, valuation ratios, and peer comparisons within the Rubber Components sector.
- Compare its P/E, P/B, and ROE against other Rubber Components sector stocks before deciding if the current valuation fits your strategy.
- Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
- Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.
Conclusion
Defrail Technologies gives investors a clear set of numbers to work with, from returns and valuation to leverage and peer standing. Whether it earns the label of best stock in Rubber Components depends on how much weight you give each of them and on how the business executes from here. Because the stock trades below its sector benchmark, the open question is whether earnings growth will close that gap or whether the discount is deserved. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Is Defrail Technologies the best stock in its sector?
Ans. There is no single definitive answer, because the best stock in a sector depends on whether an investor is prioritising returns, valuation or balance sheet strength. Defrail Technologies has a 16.71% ROE and trades at 13.98x P/E against a 36.19x Industry P/E. Against the 2 peers compared in this article, its ROE is above the 13.87% peer average and its P/E is below the 36.97x peer average. Its debt to equity ratio of 0.38 is above the 0.17 peer average, which matters because borrowing can inflate returns and add risk when business conditions weaken. These figures are best read together rather than in isolation, and they work as a starting point for your own research and not as a verdict.
What is the current share price of Defrail Technologies?
Ans. Defrail Technologies was trading at Rs 79.80 on the BSE as of 22 October 2026, and its 52-week range runs from Rs 64.15 to Rs 122.00. That leaves the share price 35 percent short of the 52-week high and 24 percent clear of the 52-week low. Its market capitalisation is Rs 56 Cr and its EPS (TTM) is Rs 5.71, which is the earnings figure behind the 13.98x P/E. Share prices change through the trading day, so check the live quote on Univest before acting on any number here.
What sector does Defrail Technologies belong to?
Ans. Defrail Technologies is classified under the Rubber Components sector on Univest, and that group of listed companies is the reference point for the 36.19x Industry P/E used in this article. The 2 named peers compared here are Sundram Fasteners and Endurance Technologies, chosen as comparable listed names so that the P/E, ROE and debt figures come from the same live data source. Investors who want a wider view can compare more Rubber Components sector stocks on the Univest Screener, since no two companies in a sector have exactly the same business mix.
How does Defrail Technologies compare to its sector peers on P/E?
Ans. Defrail Technologies’ P/E of 13.98x is below the 36.97x average of the 2 named peers, with Sundram Fasteners at 38.83x and Endurance Technologies at 35.10x. It also sits below the 36.19x Industry P/E, which is the benchmark for the wider Rubber Components sector. A P/E that is below a peer average can reflect a valuation discount or premium, but it can also reflect different growth or return expectations, so it should be read alongside ROE and debt. Its P/B ratio of 2.34 gives one more view of how the market values its book value.
What is Defrail Technologies’ return on equity?
Ans. Defrail Technologies reported a return on equity of 16.71%, which is above the 13.87% average of its named peers, with Sundram Fasteners at 13.83% and Endurance Technologies at 13.91%. ROE shows how much profit a company generates on every rupee of shareholders’ equity, so a higher figure generally points to more efficient use of capital. ROE is easier to trust when leverage is modest, and here the debt to equity ratio is 0.38 against a peer average of 0.17. It is worth checking whether the ROE has been stable over several years rather than relying on a single reading.
Should I invest in Defrail Technologies based on its sector position?
Ans. Sector position is only one input into an investment decision. Defrail Technologies has a 16.71% ROE and a 13.98x P/E, which make it worth researching further, and its dividend yield is 0.00%. You should also weigh its business outlook, earnings consistency, debt levels, your investment horizon and your own risk appetite before buying. Spreading money across several stocks and sectors reduces concentration risk, and this article is educational content, not investment advice. For personalised guidance, consult a SEBI-registered advisor.
