Carver Roboweld IPO Review: Key Details, Company Overview and Financials
- October 23, 2026
- Posted by: Harsh Piplani
- Category: IPO
Carver Roboweld IPO opens 28 Oct, closes 30 Oct 2026. Fresh issue of 35,36,000 shares. Lists 4 Nov on BSE SME. Price band to be announced.
Quick Answer
The Carver Roboweld IPO is a 100 percent fresh issue of 35,36,000 equity shares of face value Rs 10, open from 28 to 30 October 2026 on the BSE SME platform. The Rajkot welding consumables maker plans to use Rs 11.99 crore to buy welding robots and Rs 8.60 crore to repay borrowings. FY26 profit after tax rose about 140 percent to Rs 3.48 crore on revenue growth of only 9 percent, and the price band had not been announced in the sources reviewed.
The Carver Roboweld IPO is a book-built SME issue consisting entirely of a fresh issue of 35,36,000 equity shares of face value Rs 10 each, with no offer for sale. The issue opens on 28 October 2026 and closes on 30 October 2026. Allotment is expected on 2 November, share credit on 3 November, and the shares are proposed to list on the BSE SME platform on 4 November 2026.
The price band and lot size were not available in the sources reviewed, so the issue size in rupees and the minimum application amount cannot be stated yet. Of the offer, 1,77,600 shares are reserved for the market maker, Shreni Shares Ltd., leaving 33,58,400 shares for the public. The share count rises from 95,66,805 before the issue to 1,31,02,805 after it.
Smart Horizon Capital Advisors Pvt. Ltd. is the book-running lead manager for the Carver Roboweld issue, and Bigshare Services Pvt. Ltd. is the registrar.
For detailed information on the company’s business, financials, risk factors and the use of proceeds, investors should refer to the Carver Roboweld Red Herring Prospectus (RHP) before making an investment decision.
Click Here – Get Free Investment Predictions
Company Overview
Incorporated in August 2009 and based in Rajkot, Gujarat, Carver Roboweld Limited makes welding consumables such as metal cored wires, welding rods and gauging electrodes, and also supplies welding spare parts, regenerates forging dies and rents out welding robots. Its main plant is in Bamanbore near Rajkot, with service units in Pune, Hosur and Ludhiana, and capacity of 650 tonnes per annum for metal cored wires and welding rods.
It acquired Carver Engineering Pvt. Ltd. in September 2025, which adds plant refurbishment and engineering services. The company holds ISO 9001:2015 certification, had 68 permanent employees and 75 contract workers at 30 June 2026, and its promoters Ranjit Chandrabhai Bose, Rajit Chandra Bose and Deval Ranjitbhai Bose hold 90.07 percent before the issue and about 65.8 percent after it (computed).
Read on for the complete Carver Roboweld IPO details, including dates, issue structure, listing timeline and the company’s financial track record.
IPO Details
| Particulars | Details |
|---|---|
| IPO Date | 28 to 30 October 2026 |
| Allotment | Mon, 2 November 2026 (tentative) |
| Share Credit to Demat | Tue, 3 November 2026 (tentative) |
| Listing Date | Wed, 4 November 2026 (tentative) |
| Face Value | Rs 10 per share |
| Price Band | Not announced in the sources reviewed |
| Lot Size | Not announced in the sources reviewed |
| Issue Type | Bookbuilding IPO (SME) |
| Sale Type | Fresh Issue only (no OFS) |
| Total Issue Size | 35,36,000 shares (rupee value not available until the price band is set) |
| Market Maker Reservation | 1,77,600 shares (Shreni Shares Ltd.) |
| Net Offer to Public | 33,58,400 shares |
| Quota in Net Offer | QIB 49.60% / NII 15.25% / Retail 35.16% |
| Shares Outstanding (pre and post issue) | 95,66,805 and 1,31,02,805 |
| Promoter Holding | 90.07% pre-issue; about 65.8% post-issue (computed) |
| Listing Exchange | BSE SME |
| Lead Manager | Smart Horizon Capital Advisors |
| Registrar | Bigshare Services |
(Compiled from the DRHP/RHP and market updates)
Industry Context
- Welding is used in construction, railways, shipbuilding, power and heavy engineering, so demand for welding consumables tracks industrial and infrastructure activity.
- Metal cored wires and flux products are replacing manual rods in many plants because they weld faster and with less waste, which supports demand for newer consumables.
- Welding automation and robots are spreading as factories look for consistent quality, and renting robots lowers the upfront cost for small fabricators.
- Raw materials such as steel strip and alloy powders move with commodity prices, and small manufacturers have limited pricing power with large buyers.
- Investors usually track capacity use, raw material cost, receivable days and the share of recurring rental and service income.
Business Strengths
Here are the key strengths investors evaluating the Carver Roboweld IPO should weigh:
- Profit is rising fast: profit after tax rose from Rs 1.01 crore in FY24 to Rs 1.45 crore in FY25 and Rs 3.48 crore in FY26, with an FY26 EBITDA margin of about 31 percent (adjusted, tracker).
- A recurring revenue angle through welding robot rental, plus an integrated mix of consumables, spare parts and engineering services.
- Capacity has grown at about 30 percent a year between FY25 and FY26, and the company holds ISO 9001:2015 certification and an American Welding Society corporate membership.
- Borrowings fell from Rs 22.32 crore at March 2025 to Rs 15.65 crore at March 2026 and Rs 12.27 crore at June 2026, while net worth rose to Rs 17.62 crore.
Screen engineering and industrial stocks on the Univest Screener
Business Risks
Alongside these strengths, the Carver Roboweld issue also carries the following business risks:
- The business is very small. FY26 total income was Rs 27.12 crore and profit was Rs 3.48 crore, so a single large customer or contract change can swing results.
- Revenue growth was only about 9 percent in FY26, so most of the profit jump came from margin gains that may not repeat.
- Net worth rose from Rs 4.56 crore to Rs 16.13 crore in FY26, far more than the profit of Rs 3.48 crore, so the source of the extra capital should be checked in the RHP.
- Debt to equity was 0.97 at March 2026 and the company is exposed to steel and alloy price changes.
- Valuation cannot be judged until the price band is announced, and SME issues are often thinly traded after listing, which can make exit hard.
Financial Performance
The Carver Roboweld IPO follows a year of sharply higher profit on modest sales growth. Total income was Rs 21.67 crore in FY24, Rs 24.97 crore in FY25 and Rs 27.12 crore in FY26, while profit after tax was Rs 1.01 crore, Rs 1.45 crore and Rs 3.48 crore. In the quarter to June 2026, total income was Rs 7.71 crore and profit after tax was Rs 1.49 crore.
Carver Roboweld Ltd. – Financials (Rs in Crore)
| Particulars | Q1 FY27 (Jun 2026) | Fiscal 2026 | Fiscal 2025 | Fiscal 2024 |
|---|---|---|---|---|
| Total Income | 7.71 | 27.12 | 24.97 | 21.67 |
| EBITDA (adjusted) | 2.84 | 8.36 | 4.92 | 4.12 |
| Profit After Tax (PAT) | 1.49 | 3.48 | 1.45 | 1.01 |
| Net Worth | 17.62 | 16.13 | 4.56 | 3.11 |
| Total Borrowings | 12.27 | 15.65 | 22.32 | 13.39 |
| Total Assets | 39.45 | 38.26 | 32.69 | 21.59 |
Amounts in Rs Crore, restated consolidated figures compiled from published Carver Roboweld IPO disclosures and trackers.
Key Ratios and Metrics
The table below summarises the key ratios for the Carver Roboweld issue as of FY26, as published by trackers. Valuation ratios are not shown because the price band was not available in the sources reviewed.
These ratios offer a quick snapshot of the profitability and balance sheet behind the Carver Roboweld IPO.
| KPI (FY26) | Value |
|---|---|
| Return on Equity (RoE) | 33.63% |
| Return on Capital Employed (RoCE) | 21.64% |
| Return on Net Worth (RoNW) | 21.57% |
| EBITDA Margin (adjusted) | 30.94% |
| PAT Margin | 12.87% |
| Debt to Equity | 0.97 (0.70 at Jun 2026) |
| Net Asset Value per Share | Rs 17.54 |
| Earnings per Share (pre-issue) | Rs 3.64 |
| Earnings per Share (post-issue, tracker) | Rs 2.65 |
| Price to Earnings and Market Cap | Not available until the price band is announced |
Objects of the Offer
The company proposes to use the net proceeds from the Carver Roboweld IPO towards the following objects.
- Purchase of welding robots (capital expenditure) (Rs 11.99 Cr)
- Repayment or prepayment of borrowings from banks and financial institutions (Rs 8.60 Cr)
- General corporate purposes (amount not shown in the sources reviewed)
Because the whole issue is fresh, all proceeds go to the company, subject to issue expenses, and the object amounts should be confirmed in the RHP.
Download the Univest iOS App or Univest Android App to track the Carver Roboweld IPO and get daily stock recommendations.
Conclusion
Here is the bottom line on the Carver Roboweld IPO.
The Carver Roboweld issue offers exposure to a small welding consumables maker with a rental robot model, rising margins and falling debt.
The cautions are a very small revenue base, slow sales growth, a net worth jump that needs explaining, steel price exposure, SME liquidity and a valuation that is not yet known.
Overall, investors weighing the Carver Roboweld issue should wait for the price band, read the Red Herring Prospectus (RHP) for customer concentration and the change in net worth, and match the position size to their own risk profile, keeping SME liquidity in mind.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data independently before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Univest does not publish grey market premium figures. Grey market premium is an unofficial and unregulated indicator collected informally outside the stock exchanges. It is not published, verified or endorsed by SEBI, NSE or BSE, can vary widely between trackers, and is not always accurate.
FAQs
When does the Carver Roboweld IPO open and close?
Ans. The Carver Roboweld IPO opens for subscription on 28 October 2026 and closes on 30 October 2026. Allotment is expected on 2 November, and the shares are proposed to list on the BSE SME platform on 4 November 2026.
What is the price band and minimum investment for the Carver Roboweld IPO?
Ans. The price band and lot size were not available in the sources reviewed. SME issues usually have a larger minimum application than mainboard issues, so check the final announcement before applying.
What does Carver Roboweld do?
Ans. Carver Roboweld is a Rajkot-based maker of welding consumables such as metal cored wires and welding rods. It also supplies welding spare parts, regenerates forging dies, rents welding robots and offers plant refurbishment through its subsidiary Carver Engineering.
Is the Carver Roboweld IPO a fresh issue or an offer for sale?
Ans. It is a 100 percent fresh issue of 35,36,000 equity shares, so all proceeds go to the company, subject to issue expenses. Promoters hold 90.07 percent before the issue.
How will Carver Roboweld use the IPO money?
Ans. The company plans to use Rs 11.99 crore to buy welding robots and Rs 8.60 crore to repay bank and financial institution borrowings, with any balance for general corporate purposes.
How has Carver Roboweld performed financially?
Ans. Total income rose from Rs 24.97 crore in FY25 to Rs 27.12 crore in FY26, and profit after tax rose from Rs 1.45 crore to Rs 3.48 crore. The June 2026 quarter added income of Rs 7.71 crore and profit of Rs 1.49 crore.
Is the Carver Roboweld IPO expensive?
Ans. That cannot be answered until the price band is announced. Once it is, compare the upper band with the pre-issue earnings per share of Rs 3.64 and the net asset value of Rs 17.54, and note that the share count rises after the fresh issue.
What are the main risks in the Carver Roboweld IPO?
Ans. The main risks are a very small business, slow revenue growth, a net worth jump that needs explaining, steel and alloy price swings, thin trading in SME shares and a valuation that is not yet known.
Who are the lead manager and registrar for the Carver Roboweld IPO?
Ans. Smart Horizon Capital Advisors Pvt. Ltd. is the book-running lead manager and Bigshare Services Pvt. Ltd. is the registrar. Shreni Shares Ltd. is the market maker.
Is the Carver Roboweld IPO a good investment?
Ans. The Carver Roboweld issue offers rising profit and a rental robot model in a niche market, but a tiny revenue base and SME liquidity risk call for caution. Wait for the price band, read the prospectus, and size the position to your own risk appetite before applying.
