3 Agrochemicals Company, Cement Producer and CNC Machining Centres Maker Stocks With a Strong Future Roadmap: Insecticides India, JK Cement and Jyoti CNC Automation
- November 19, 2026
- Posted by: Harsh Piplani
- Category: Best Stocks
Insecticides India, JK Cement and Jyoti CNC Automation: ROE of 11.4% to 16.8% and FY22 to FY26 revenue CAGR of 9.3% to 30.2%. Prices as of 18 Nov 2026.
Quick Answer
The three pesticide, building cement and CNC lathe stocks to watch are Insecticides India, JK Cement and Jyoti CNC Automation. Their return on equity ranges from 11.4% to 16.8%, and their revenue compound annual growth from FY22 to FY26 ranges from 9.3% to 30.2%. Jyoti CNC Automation leads on both return on equity at 16.8% and revenue growth at 30.2% a year. Prices are based on the 18 November 2026 close, and this article is educational, not investment advice.
Pesticide, building cement and CNC lathe stocks let investors follow companies that serve a growing part of the Indian economy. Insecticides India, JK Cement and Jyoti CNC Automation cover an agrochemicals company, a cement producer and a CNC machining centres maker.
This list covers three pesticide, building cement and CNC lathe stocks with complete current figures: Insecticides India, JK Cement and Jyoti CNC Automation. Every figure comes from the latest reported financials and the 18 November 2026 market close. Companies without complete current figures were left out.
Click Here – Get Free Investment Predictions
What Are Pesticide, Building Cement and CNC Lathe Stocks?
Pesticide, building cement and CNC lathe stocks are listed companies that make and sell crop protection chemicals for farmers, make grey and white cement for builders, and make CNC machining centres for factories. Their earnings depend on crop demand, building activity and factory orders.
Pesticide, Building Cement and CNC Lathe Stocks at a Glance
| Company | CMP (Rs) | Market Cap (Rs Cr) | P/E | Industry P/E | ROE (%) | D/E |
|---|---|---|---|---|---|---|
| Insecticides India | 545.1 | 1,507 | 12.0 | 21.9 | 11.4 | 0.13 |
| JK Cement | 5,151.8 | 37,671 | 40.1 | 29.1 | 14.1 | 0.88 |
| Jyoti CNC Automation | 1,050 | 22,175 | 68.9 | 44.4 | 16.8 | 0.43 |
On valuation, Insecticides India trades at a P/E below the industry P/E, while JK Cement and Jyoti CNC Automation trade above it, which reflects the growth the market already expects. Readers comparing pesticide, building cement and CNC lathe stocks should look at return on equity and debt together, since a high return earned with low debt is easier to sustain.
Why Do Pesticide, Building Cement and CNC Lathe Stocks Have a Strong Roadmap in India?
Pesticide, building cement and CNC lathe stocks have a strong roadmap in India because steady farm input demand, strong building activity and strong factory investment keep widening the market for these companies.
- Agrochemicals. Farmers protect their yields.
- Cement. Builders need steady supply.
- Machining centres. Factories need exact machines.
Why Insecticides India Features Among These Pesticide, Building Cement and CNC Lathe Stocks
Among the pesticide, building cement and CNC lathe stocks on this list, Insecticides India is a Delhi-based crop protection company that makes and sells insecticides, herbicides and fungicides to farmers through a wide network of dealers and distributors.
Revenue rose from Rs 1,508 crore in FY22 to Rs 2,152 crore in FY26, a compound annual growth rate of 9.3%. Net profit grew from Rs 107 crore in FY22 to Rs 139 crore in FY26, which works out to a compound annual growth rate of 6.7%.
The company has a return on equity of 11.4%, a debt to equity ratio of 0.13 and a market capitalisation of Rs 1,507 crore. The stock trades at a P/E of 12.0, below the industry P/E of 21.9.
Roadmap: The company is launching new formulations and growing its own brands, which supports better margins. Rising demand for crop protection from Indian farmers supports steady volumes.
What to watch: Follow monsoon trends, new product launches and technical raw material costs.
Why JK Cement Features Among These Pesticide, Building Cement and CNC Lathe Stocks
Among the crop care, cement producer and machine tool shares on this list, JK Cement is a cement and building products company with plants in northern, western and southern India. It sells grey cement, white cement and wall putty, and it has a strong presence in the premium white cement segment.
The company has a return on equity of 14.1%, a debt to equity ratio of 0.88 and a market capitalisation of Rs 37,671 crore. The stock trades at a P/E of 40.1, above the industry P/E of 29.1.
Revenue rose from Rs 8,134 crore in FY22 to Rs 13,917 crore in FY26, a compound annual growth rate of 14.4%. Net profit grew from Rs 679 crore in FY22 to Rs 988 crore in FY26, which works out to a compound annual growth rate of 9.8%. In the June 2026 quarter, revenue grew 19.4% year on year to Rs 4,071 crore.
Roadmap: The company is expanding grey cement capacity in several regions and growing its white cement and putty range, which carries a strong brand. Housing and infrastructure activity supports steady cement demand.
What to watch: Track capacity additions, volume growth and realisation per tonne.
Why Jyoti CNC Automation Features Among These Pesticide, Building Cement and CNC Lathe Stocks
Among the three companies on this list, Jyoti CNC Automation, based in Rajkot, makes computer numerical control machines, including multi-axis machining centres, for aerospace, defence, auto and general engineering customers.
Revenue rose from Rs 750 crore in FY22 to Rs 2,154 crore in FY26, a compound annual growth rate of 30.2%. Net profit grew from Rs 151 crore in FY24 to Rs 336 crore in FY26, which works out to a compound annual growth rate of 49.2%.
In the June 2026 quarter, revenue grew 19.0% year on year to Rs 512 crore. The company has a return on equity of 16.8%, a debt to equity ratio of 0.43 and a market capitalisation of Rs 22,175 crore. The stock trades at a P/E of 68.9, above the industry P/E of 44.4.
Roadmap: Defence and aerospace manufacturing, along with the shift to precision machining at Indian factories, supports demand for advanced CNC machines. The company has also built a presence in Europe through an acquisition, adding technology and customers abroad.
What to watch: Watch order book trends and how quickly the international business contributes.
Insecticides India vs JK Cement vs Jyoti CNC Automation on Key Financials
The table below sets the three pesticide, building cement and CNC lathe stocks side by side on revenue, profit and margin, using reported figures.
| Company | FY22 Revenue (Rs Cr) | FY26 Revenue (Rs Cr) | Revenue CAGR (FY22-FY26) | FY26 Net Profit (Rs Cr) | FY26 Net Margin |
|---|---|---|---|---|---|
| Insecticides India | 1,508 | 2,152 | 9.3% | 139 | 6.5% |
| JK Cement | 8,134 | 13,917 | 14.4% | 988 | 7.1% |
| Jyoti CNC Automation | 750 | 2,154 | 30.2% | 336 | 15.6% |
Jyoti CNC Automation posts the highest return on equity in this group at 16.8%. JK Cement has the largest FY26 revenue at Rs 13,917 crore, and Jyoti CNC Automation shows the fastest revenue growth with a 30.2% compound annual rate. A useful habit with pesticide, building cement and CNC lathe stocks is to check each new quarterly result against the capacity plans the company described earlier.
Key Risks to Check Before Investing in Pesticide, Building Cement and CNC Lathe Stocks
Every theme carries risks that deserve a check before any decision. For these pesticide, building cement and CNC lathe stocks, the main points are: Long-term crop care, cement producer and machine tool shares holders usually track revenue growth, margins and cash flow side by side rather than relying on a single ratio.
- Season and monsoon. Crop protection sales follow rain and pest cycles.
- Capex cycles. Customer spending on plants and projects can vary.
- Order timing. Project awards can shift between periods.
Treat this list as a starting point for research and not as a recommendation. Read the latest results presentation, check the management commentary on order books or capacity plans, and compare each company with its peers before you decide anything.
Use the Univest Stock Screener to filter pesticide, building cement and CNC lathe stocks by market capitalisation, P/E, ROE and growth, and build your own shortlist.
Final Thoughts on Pesticide, Building Cement and CNC Lathe Stocks
Pesticide, building cement and CNC lathe stocks reward investors who follow demand trends, order books and margins together. Insecticides India, JK Cement and Jyoti CNC Automation each have a clear plan to grow. Based on the 18 November 2026 close, Insecticides India trades at Rs 545.1, JK Cement at Rs 5,151.8 and Jyoti CNC Automation at Rs 1,050.
Download the Univest iOS App or Univest Android App to track pesticide, building cement and CNC lathe stocks, set price alerts and get research-backed stock ideas.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
What are pesticide, building cement and CNC lathe stocks?
Ans. Pesticide, building cement and CNC lathe stocks are listed companies that make and sell crop protection chemicals for farmers, make grey and white cement for builders, and make CNC machining centres for factories. Their earnings depend on crop demand, building activity and factory orders. This list looks at three of them, Insecticides India, JK Cement and Jyoti CNC Automation, using reported FY22 to FY26 financials and the 18 November 2026 closing prices.
Which pesticide, building cement and CNC lathe stocks are covered in this list?
Ans. This list covers Insecticides India, JK Cement and Jyoti CNC Automation. Based on the 18 November 2026 close, Insecticides India traded at Rs 545.1, JK Cement at Rs 5,151.8 and Jyoti CNC Automation at Rs 1,050. Their return on equity ranges from 11.4% to 16.8%, and their revenue compound annual growth from FY22 to FY26 ranges from 9.3% to 30.2%.
Why do pesticide, building cement and CNC lathe stocks have a strong future roadmap in India?
Ans. Pesticide, building cement and CNC lathe stocks have a strong roadmap in India because steady farm input demand, strong building activity and strong factory investment keep widening the market for these companies. The main drivers are as follows. Agrochemicals. Farmers protect their yields. Cement. Builders need steady supply. Machining centres. Factories need exact machines. Together these factors give the companies on this list a visible path for growth over the coming years.
How has Insecticides India performed financially?
Ans. Revenue rose from Rs 1,508 crore in FY22 to Rs 2,152 crore in FY26, a compound annual growth rate of 9.3%. Net profit grew from Rs 107 crore in FY22 to Rs 139 crore in FY26, which works out to a compound annual growth rate of 6.7%. The company has a return on equity of 11.4%, a debt to equity ratio of 0.13 and a market capitalisation of Rs 1,507 crore. The stock trades at a P/E of 12.0, below the industry P/E of 21.9. Looking ahead, the company is launching new formulations and growing its own brands, which supports better margins. Rising demand for crop protection from Indian farmers supports steady volumes.
How has JK Cement performed financially?
Ans. Revenue rose from Rs 8,134 crore in FY22 to Rs 13,917 crore in FY26, a compound annual growth rate of 14.4%. Net profit grew from Rs 679 crore in FY22 to Rs 988 crore in FY26, which works out to a compound annual growth rate of 9.8%. In the June 2026 quarter, revenue grew 19.4% year on year to Rs 4,071 crore. The company has a return on equity of 14.1%, a debt to equity ratio of 0.88 and a market capitalisation of Rs 37,671 crore. The stock trades at a P/E of 40.1, above the industry P/E of 29.1. Looking ahead, the company is expanding grey cement capacity in several regions and growing its white cement and putty range, which carries a strong brand. Housing and infrastructure activity supports steady cement demand.
How has Jyoti CNC Automation performed financially?
Ans. Revenue rose from Rs 750 crore in FY22 to Rs 2,154 crore in FY26, a compound annual growth rate of 30.2%. Net profit grew from Rs 151 crore in FY24 to Rs 336 crore in FY26, which works out to a compound annual growth rate of 49.2%. In the June 2026 quarter, revenue grew 19.0% year on year to Rs 512 crore. The company has a return on equity of 16.8%, a debt to equity ratio of 0.43 and a market capitalisation of Rs 22,175 crore. The stock trades at a P/E of 68.9, above the industry P/E of 44.4. Looking ahead, defence and aerospace manufacturing, along with the shift to precision machining at Indian factories, supports demand for advanced CNC machines. The company has also built a presence in Europe through an acquisition, adding technology and customers abroad.
What risks should investors check before buying pesticide, building cement and CNC lathe stocks?
Ans. Investors should check a few risks before buying pesticide, building cement and CNC lathe stocks. Season and monsoon. Crop protection sales follow rain and pest cycles. Capex cycles. Customer spending on plants and projects can vary. Order timing. Project awards can shift between periods. Reading the latest results presentation and comparing each company with its peers helps judge how these risks apply to each stock.
Is this list of pesticide, building cement and CNC lathe stocks investment advice?
Ans. No. This article is educational and uses publicly available data as of the 18 November 2026 close. Please verify figures on NSE and BSE, read company filings and consult a SEBI registered adviser before investing. Univest is SEBI registered research analyst INH000013776.