Is Macpower CNC Machines the Best Stock in Its Sector? A Look at the Numbers
- October 1, 2026
- Posted by: Chaitanya Auti
- Category: Market
Macpower CNC Machines CMP Rs 2,096 (01 Oct 2026). Market cap Rs 2,097 Cr. ROE 19.33%. P/E 53.91x versus Industry P/E 55.61x.
Quick Answer
Macpower CNC Machines is one of the names investors compare when screening the Capital Goods sector, built on a 19.33% return on equity and a P/E of 53.91x against an Industry P/E of 55.61x. Whether Macpower CNC Machines is the best stock in its sector depends on whether an investor is optimising for return ratios, valuation, or both. This article breaks down the metrics, including a comparison against named Capital Goods sector peers, so you can judge that for yourself.
Is Macpower CNC Machines the best stock in its sector? The stock trades on the NSE at Rs 2,096 as of 01 October 2026, within its 52-week range of Rs 761.00 to Rs 2,226.00. Macpower CNC Machines Ltd manufactures CNC turning and machining centres.
Macpower CNC Machines sits in the Capital Goods sector, and its 19.33% ROE and 53.91x P/E give a starting point for judging where it stands against comparable listed names. The rest of this article compares those numbers against verified peers and the sector’s Industry P/E benchmark.
Also read – Is Abbott India the Best Stock in Its Sector? A Look at the Numbers
Click Here – Get Free Investment Predictions
About Macpower CNC Machines
Macpower CNC Machines Ltd manufactures CNC turning and machining centres. The stock has nearly tripled from its 52-week low and is trading close to its 52-week high. At a market capitalisation of Rs 2,097 Cr, it is tracked as part of the Capital Goods sector on Univest.
Is Macpower CNC Machines the Best Stock in Its Sector?
Macpower CNC Machines makes its case as the best stock in its sector primarily on return on equity and balance sheet strength, combining a 19.33% ROE with a 53.91x P/E against the sector’s 55.61x Industry P/E. Macpower CNC Machines trades right at its 55.61x Industry P/E with a strong 19.33% ROE, though an 11.97x price to book is demanding after the stock has nearly tripled from its 52-week low.
| Metric | Macpower CNC Machines |
|---|---|
| CMP (NSE) | Rs 2,096.00 |
| 52-Week High / Low | Rs 2,226.00 / Rs 761.00 |
| Market Cap | Rs 2,097 Cr |
| P/E (TTM) vs Industry P/E | 53.91x vs 55.61x |
| P/B | 11.97 |
| ROE | 19.33% |
| EPS (TTM) | Rs 38.88 |
| Dividend Yield | 0.07% |
| Debt to Equity | 0.00 |
Compare Macpower CNC Machines Against Other Capital Goods Sector Stocks
How Macpower CNC Machines Compares Against Its Capital Goods Sector Peers
The table below sets Macpower CNC Machines against 2 other Capital Goods sector names, using the same live data source for every company. A peer average row is included for P/E, ROE and debt to equity, calculated across the 2 peer companies.
| Company | Market Cap (Rs Cr) | P/E | ROE | Debt to Equity |
|---|---|---|---|---|
| Macpower CNC Machines | 2,097 | 53.91 | 19.33% | 0.00 |
| Kronox Lab Sciences | 806 | 28.21 | 23.82% | 0.01 |
| Kernex Microsystems India | 2,932 | 15.38 | 35.60% | 0.65 |
| Peer average (2 companies) | – | 21.80 | 29.71% | 0.33 |
Against this peer set, Macpower CNC Machines’s 19.33% ROE is below the 29.71% peer average, and its P/E of 53.91x runs above the peer average of 21.80x. Macpower CNC Machines trades right at its 55.61x Industry P/E with a strong 19.33% ROE, though an 11.97x price to book is demanding after the stock has nearly tripled from its 52-week low.
What Makes Macpower CNC Machines Worth Watching in Capital Goods
- Close to Industry P/E: A 53.91x P/E versus a 55.61x Industry P/E shows the stock trading right at sector norms.
- Strong ROE, debt free: A 19.33% ROE alongside a debt to equity ratio of 0.00 reflects an efficient, well-capitalised machine tools business.
- CNC machine tools scale: Manufacturing CNC turning and machining centres gives Macpower CNC Machines exposure to India’s manufacturing automation push.
Macpower CNC Machines Valuation: Is It Justified?
Macpower CNC Machines trades right at its 55.61x Industry P/E with a strong 19.33% ROE, though an 11.97x price to book is demanding after the stock has nearly tripled from its 52-week low. As with any single stock, investors should weigh this against their own valuation discipline and risk appetite rather than the sector label alone.
Also read – Is LG Balakrishnan and Bros the Best Stock in Its Sector? A Look at the Numbers
Download the Univest iOS App or Univest Android App to track Macpower CNC Machines and other Capital Goods sector stocks.
How to Track Macpower CNC Machines Before You Invest
Before deciding whether Macpower CNC Machines deserves its label as the best stock in its sector for your own portfolio, compare it directly against Capital Goods sector peers using the steps below.
- Open the Univest Screener and search for Macpower CNC Machines to view live price, valuation ratios, and peer comparisons within the Capital Goods sector.
- Compare its P/E, P/B, and ROE against other Capital Goods sector stocks before deciding if the current valuation fits your strategy.
- Set a price alert around key support and resistance zones using the Univest app so you are notified of meaningful moves.
- Open a broking account on Univest if you decide to add the stock, and size the position based on your own risk appetite and portfolio allocation.
Conclusion
Macpower CNC Machines earns a place in the best stock in its sector conversation on the strength of a 19.33% ROE and a P/E of 53.91x against a 55.61x Industry P/E, with named peer comparisons in this article backing up that picture. As with any individual stock decision, this analysis is educational and investors should do their own research or consult a SEBI-registered advisor before investing.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
Is Macpower CNC Machines the best stock in its sector?
Ans. Macpower CNC Machines has a 19.33% ROE and trades at 53.91x P/E against a 55.61x Industry P/E, and compares below the peer average ROE of 29.71% in this article’s named comparison, so the answer depends on what an investor is prioritising.
What is the current share price of Macpower CNC Machines?
Ans. Macpower CNC Machines was trading at Rs 2,096.00 on the NSE as of 01 October 2026, within its 52-week range of Rs 761.00 to Rs 2,226.00.
What sector does Macpower CNC Machines belong to?
Ans. Macpower CNC Machines is classified under the Capital Goods sector on Univest.
How does Macpower CNC Machines compare to its sector peers on P/E?
Ans. Macpower CNC Machines’s P/E of 53.91x is above the 21.80x average of the 2 named peers compared in this article.
What is Macpower CNC Machines’s return on equity?
Ans. Macpower CNC Machines reported a return on equity of 19.33%, which is below the 29.71% average of its named peers in this comparison.
Should I invest in Macpower CNC Machines based on its sector position?
Ans. Macpower CNC Machines’s sector position and metrics make it worth researching further, but any investment decision should factor in your own risk appetite, its valuation relative to peers, and independent research or advice from a SEBI-registered advisor.
{“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “Is Macpower CNC Machines the best stock in its sector?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines has a 19.33% ROE and trades at 53.91x P/E against a 55.61x Industry P/E, and compares below the peer average ROE of 29.71% in this article’s named comparison, so the answer depends on what an investor is prioritising.”}}, {“@type”: “Question”, “name”: “What is the current share price of Macpower CNC Machines?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines was trading at Rs 2,096.00 on the NSE as of 01 October 2026, within its 52-week range of Rs 761.00 to Rs 2,226.00.”}}, {“@type”: “Question”, “name”: “What sector does Macpower CNC Machines belong to?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines is classified under the Capital Goods sector on Univest.”}}, {“@type”: “Question”, “name”: “How does Macpower CNC Machines compare to its sector peers on P/E?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines’s P/E of 53.91x is above the 21.80x average of the 2 named peers compared in this article.”}}, {“@type”: “Question”, “name”: “What is Macpower CNC Machines’s return on equity?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines reported a return on equity of 19.33%, which is below the 29.71% average of its named peers in this comparison.”}}, {“@type”: “Question”, “name”: “Should I invest in Macpower CNC Machines based on its sector position?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Macpower CNC Machines’s sector position and metrics make it worth researching further, but any investment decision should factor in your own risk appetite, its valuation relative to peers, and independent research or advice from a SEBI-registered advisor.”}}]}