Standard Engineering Technology Share Price Target 2027: 4.9% Upside to Rs 355, Bull Rs 431
- November 12, 2026
- Posted by: Chaitanya Auti
- Category: Market
Standard Engineering Technology share price Rs 338.50 (12 November 2026). Base target Rs 355, bull Rs 431, downside risk Rs 266. PE 68.77. 52W range Rs 104.56 to Rs 468.15.
Quick Answer
The Standard Engineering Technology share price target for 2027 is Rs 355, about 4.9% above the current price of Rs 338.50. The bull case is Rs 431, and the downside risk level, which is not a target, is Rs 266. The base case assumes earnings per share grow 6.7% a year, the pace seen from FY24 to FY26, with the stock holding its PE of 68.77. These are model-based estimates built from reported financials, not guaranteed outcomes.
Investors weighing a Standard Engineering Technology target price for 2027 should start with where the stock sits today. At Rs 338.50 on 12 November 2026, it is 27.7% below its 52-week high of Rs 468.15 and 223.7% above its 52-week low of Rs 104.56. That range spans 348% from low to high, so the entry point matters as much as the Standard Engineering Technology price forecast itself.
This article builds the Standard Engineering Technology share price target from reported numbers only: five years of annual results, the last five quarters, the latest shareholding pattern and current valuation ratios from company filings and exchange data. Each scenario states its assumptions, so you can trace how the base case, the bull case and the downside risk level were reached and test them against your own view.
Click Here – Get Free Investment Predictions
Standard Engineering Technology Stock Analysis: Company Overview and Key Stats
Standard Engineering Technology (NSE: SETL) has a market capitalisation of Rs 6,626 crore. In FY26 it reported revenue of Rs 793.09 crore and net profit of Rs 83.04 crore. The table collects the figures the Standard Engineering Technology share price target is built on.
| Metric | Value |
|---|---|
| Company | Standard Engineering Technology |
| NSE Ticker | SETL |
| CMP (12 November 2026) | Rs 338.50 |
| 52-Week High | Rs 468.15 |
| 52-Week Low | Rs 104.56 |
| Market Cap | Rs 6,626 crore |
| PE Ratio (TTM) | 68.77 |
| Industry PE | 42.97 |
| Price to Book | 7.87 |
| Return on Equity | 10.89% |
| Debt to Equity | 0.22 |
| EPS (TTM) | Rs 4.83 |
| Dividend Yield | 0.00% |
| 12-Month Base Target | Rs 355 |
| Bull Case | Rs 431 |
| Downside Risk Level (not a target) | Rs 266 |
Why Is Standard Engineering Technology Share Price Target Set at Rs 355 for 2027?
The arithmetic is short. Trailing EPS of Rs 4.83 grown for one year gives a forward EPS estimate of Rs 5.16, and multiplying it by the unchanged PE of 68.77 gives the Rs 355 base-case Standard Engineering Technology stock target. The bull case adds faster earnings growth and a higher multiple, while the downside risk level assumes flat earnings and a lower multiple.
Earnings Growth Behind the Standard Engineering Technology Target Price: Five Years of Results
Standard Engineering Technology grew revenue from Rs 241.50 crore in FY22 to Rs 793.09 crore in FY26, a compound annual growth rate of 34.6%. Net profit grew faster, from Rs 25.14 crore to Rs 83.04 crore (34.8% a year), which shows margin gains did part of the work and not just higher sales.
| Financial Year | Revenue (Rs Cr) | Net Profit (Rs Cr) | EPS (Rs) | Dividend per Share (Rs) |
|---|---|---|---|---|
| FY22 | 241.50 | 25.14 | 2.22 | 0.00 |
| FY23 | 500.08 | 53.42 | 3.49 | 0.00 |
| FY24 | 549.68 | 60.01 | 3.52 | 0.00 |
| FY25 | 625.97 | 68.65 | 3.47 | 0.00 |
| FY26 | 793.09 | 83.04 | 4.01 | 0.00 |
FY26 revenue growth was 26.7%, slower than the four-year average of 34.6%, and net profit moved up 21.0%. EPS rose from Rs 3.52 in FY24 to Rs 4.01 in FY26. The FY27 outlook for the Standard Engineering Technology price target depends on whether that EPS estimate keeps compounding.
Margins and the Latest Quarter
Standard Engineering Technology converted 10.5% of FY26 revenue into net profit, against 11.0% in FY25, within a five-year range of 10.4% to 11.0%. EBITDA margin was 17.4% in FY26 versus 19.1% in FY25.
In the September 2026 quarter, revenue was Rs 296.91 crore, up 57.8% from the same quarter a year earlier, while net profit of Rs 28.20 crore was up 37.9%. EBITDA came in at Rs 51.72 crore, up 51.9% year on year. The next quarterly result is the first test of whether the earnings assumption behind the Standard Engineering Technology stock target holds.
Balance Sheet and Cash Flow
Debt to equity stands at 0.22, and shareholders’ equity grew from Rs 68.96 crore in FY22 to Rs 797.72 crore in FY26. Operating cash flow in FY26 was Rs 45.33 crore against capital expenditure of Rs 61.53 crore, leaving negative free cash flow of Rs 16.20 crore. In FY25 free cash flow was negative at Rs 22.54 crore.
Valuation Check for the Standard Engineering Technology Stock Target: PE, Price to Book and ROE
At a PE of 68.77 against an industry PE of 42.97, Standard Engineering Technology trades at a premium to its industry. Price to book is 7.87 on a book value of Rs 42.21 per share, and return on equity is 10.89%. A PE of 68.77 equals an earnings yield of 1.5%, and the FY26 dividend of Rs 0.00 per share gives a yield of 0.00%.
Shareholding Pattern and Institutional Holding
Promoters held 60.47% of Standard Engineering Technology in September 2026, and promoter holding has stayed near 60.47% since September 2025. Foreign institutional investors (FII) held 1.30% and domestic institutions (DII) held 1.66%, which puts total institutional holding at 2.96%. FII holding fell from 2.71% in September 2025 to 1.30% in September 2026. Public shareholders own the remaining 36.57%. Institutional holding this low means the stock sees limited professional coverage, and price moves can be sharper when trading volumes are thin.
Standard Engineering Technology Share Price Targets for the Short Term and 12 Months
Short Term Standard Engineering Technology Stock Target Levels: Technical Setup
At Rs 338.50 on 12 November 2026, Standard Engineering Technology trades below its 50-day simple moving average of Rs 392.60 and above its 200-day exponential moving average of Rs 275.77. The 14-day RSI reads 51.1, which is neutral territory, and the MACD line sits below its signal line. The nearest resistance level is Rs 392.60 (50-day simple moving average) and the nearest support is Rs 275.77 (200-day exponential moving average). A sustained move above Rs 392.60 would improve the short-term setup, while a close below Rs 275.77 would shift attention to the next support.
12 Month Standard Engineering Technology Target Price for 2027
The 12-month target of Rs 355 means a move of 4.9% up from Rs 338.50 over the next 12 months. It would still leave the stock 24.2% below its 52-week high of Rs 468.15. The upside in the base case is thin, so the thesis here leans on the bull case and on patience. Anyone checking the Standard Engineering Technology share price target against their own view should focus on two inputs: the EPS estimate and the PE multiple.
How EPS Growth and PE Multiple Change the Standard Engineering Technology Target Price
| EPS Growth | PE 55.02 | PE 68.77 | PE 79.09 |
|---|---|---|---|
| 0.0% (EPS Rs 4.83) | Rs 266 | Rs 332 | Rs 382 |
| 6.7% (EPS Rs 5.16) | Rs 284 | Rs 355 | Rs 408 |
| 12.7% (EPS Rs 5.45) | Rs 300 | Rs 375 | Rs 431 |
Each cell multiplies the forward EPS estimate by the PE shown. Reading across a row shows what a de-rating or re-rating does to the Standard Engineering Technology price forecast, and reading down a column shows what earnings growth is worth at a fixed multiple.
Bull Case and Downside Risk for Standard Engineering Technology Stock Target in 2027
Bull Case Rs 431
The bull case Standard Engineering Technology price target needs EPS growth of 12.7%, which lifts forward EPS to Rs 5.45, and a PE multiple that rises 15% to 79.09. That gives Rs 431, 27.3% above the current price and below the 52-week high of Rs 468.15.
Downside Risk Level Rs 266
The downside risk level is not a target. It assumes EPS stays flat at Rs 4.83 and the PE falls 20% to 55.02. That gives Rs 266, 21.4% below the current price and above the 52-week low of Rs 104.56.
| Scenario | EPS Growth | PE Multiple | Price (Rs) | Change vs CMP |
|---|---|---|---|---|
| Bull Case | 12.7% | 79.09 | Rs 431 | +27.3% |
| Base Case | 6.7% | 68.77 | Rs 355 | +4.9% |
| Downside Risk | 0.0% | 55.02 | Rs 266 | -21.4% |
Key Risks to the Standard Engineering Technology Target Price for 2027
Growth Slowdown Risk for the Standard Engineering Technology Price Target
Revenue in the September 2026 quarter was up 57.8% year on year, and FY26 revenue growth was 26.7%. If growth slows from here, the EPS estimate behind the Standard Engineering Technology stock target will need revising.
Liquidity and Size Risk
Standard Engineering Technology has a market capitalisation of Rs 6,626 crore. Institutional holding is 2.96%, and promoters hold 60.47%. Stocks of this size are usually liquid, though exits can take longer than entries when the market is falling.
Valuation and Margin Risk
Net margin was 10.5% in FY26, so a small slip in costs moves profit noticeably. At a PE of 68.77 versus an industry PE of 42.97, a de-rating toward the downside-risk PE of 55.02 would cut the price even if earnings hold.
Market and Technical Risk
Technical indicators add short-term risk: the 14-day RSI is 51.1 and the MACD sits below its signal line. A broad fall in the Nifty 50 or the Sensex can override company fundamentals for weeks at a time.
How to Invest in Standard Engineering Technology
Start with the live price and volume. Any Standard Engineering Technology share price target is only as current as the data behind it, and the data here is as of 12 November 2026, so refresh the Rs 338.50 price before acting on any level.
Next, review the fundamentals yourself. The Univest Screener lets you check Standard Engineering Technology’s PE, ROE, debt and shareholding in one place.
Check Standard Engineering Technology fundamentals on the Univest Screener
Then compare the three Standard Engineering Technology target price scenarios with your own view. If you expect EPS growth below 6.7%, the base case is too optimistic for you; if you expect more, the bull case deserves weight.
Decide your position size and exit levels before you buy. The support and resistance levels above can serve as reference points, but they are not recommendations.
Finally, place the order through a SEBI-registered broker or the Univest app, and review the position after each quarterly result. Consult a SEBI-registered advisor if you are unsure.
Download the Univest iOS App or Univest Android App to track Standard Engineering Technology live price and get daily stock recommendations.
Conclusion
The Standard Engineering Technology share price target for 2027 is Rs 355 in the base case, with Rs 431 as the bull case. The support for that view is arithmetic you can check: EPS grew 6.7% a year over FY24 to FY26, and the stock trades at a PE of 68.77. The risks are equally concrete, including a PE of 68.77 that sits above the industry PE of 42.97 and a downside scenario that cuts the price 21% if earnings stall. Use these numbers as a framework for judging the Standard Engineering Technology price target, check them against the latest filings, and size any position to your own risk appetite.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
FAQs on Standard Engineering Technology Share Price Target 2027
What is the Standard Engineering Technology share price target for 2027?
Ans. The base-case Standard Engineering Technology share price target for 2027 is Rs 355, which is 4.9% above the price of Rs 338.50 on 12 November 2026. The bull case is Rs 431 and the downside risk level, which is not a target, is Rs 266. All three come from one method: forward EPS multiplied by a PE multiple, using only reported results. They are model estimates and not guaranteed outcomes, and the next quarterly result is the first check on the EPS assumption.
What is the Standard Engineering Technology share price today?
Ans. As of 12 November 2026, 9:28 AM IST, Standard Engineering Technology (NSE: SETL) trades at Rs 338.50, up 1.93% on the day. That is 27.7% below the 52-week high of Rs 468.15 and 223.7% above the 52-week low of Rs 104.56. The market capitalisation of Rs 6,626 crore places it among mid-cap stocks. Prices change through the trading session, so check the live quote before acting on any level in this article.
Is Standard Engineering Technology a buy or sell at the current price?
Ans. The data points both ways. On the positive side, EPS has grown 6.7% a year over FY24 to FY26 and the base case implies 4.9% upside; on the cautious side, the PE of 68.77 sits above the industry PE of 42.97, and the downside risk level of Rs 266 is 21% below the current price. Whether Standard Engineering Technology fits your portfolio depends on your time horizon, position size and risk appetite. Consult a SEBI-registered advisor before investing, as this article is not investment advice.
What are the bull case target and downside risk level for Standard Engineering Technology shares?
Ans. The bull case in the Standard Engineering Technology share price target for 2027 is Rs 431, which assumes 12.7% EPS growth and a PE of 79.09, a 15% re-rating from today’s multiple. That is 27.3% above the current price and below the 52-week high of Rs 468.15. The downside risk level is Rs 266, which assumes flat EPS and a PE of 55.02, 20% lower than today. It sits 21.4% below the current price and above the 52-week low of Rs 104.56, and it marks a risk to watch, not a target.
What are the main risks to the Standard Engineering Technology price target?
Ans. Four risks matter most for the Standard Engineering Technology share price target: slower revenue or profit growth, a PE de-rating, thin liquidity or size risk, and weakness in the broader market. With a market capitalisation of Rs 6,626 crore, the stock is usually liquid, though exits can take longer than entries in a falling market. A fall to the downside-risk PE of 55.02 would cut the price even if earnings hold.
What is the PE ratio of Standard Engineering Technology and how does it compare with the industry?
Ans. The PE ratio of Standard Engineering Technology is 68.77, against an industry PE of 42.97, which is a premium to the industry. Price to book is 7.87 and return on equity is 10.89%, and the PE equals an earnings yield of 1.5%. The base case holds the PE unchanged, so the Standard Engineering Technology share price target moves only with earnings, while the bull and downside scenarios change the multiple by +15% and -20%.
Who owns Standard Engineering Technology, and what is the promoter holding?
Ans. Promoters held 60.47% of Standard Engineering Technology in September 2026. FII held 1.30%, DII held 1.66% and the public held 36.57%. Together the two institutional groups hold 2.96%. Shareholding is filed every quarter, so it is worth rechecking after each result.
What were Standard Engineering Technology’s latest quarterly results?
Ans. In the September 2026 quarter, Standard Engineering Technology reported revenue of Rs 296.91 crore (up 57.8% year on year) and net profit of Rs 28.20 crore (up 37.9%). For comparison, FY26 full-year revenue growth was 26.7% and net profit moved up 21.0%. Each new quarter either supports or weakens the EPS growth of 6.7% assumed in the base case.