Carver Roboweld IPO Day 3: Subscription Closes Today, 30 October 2026
- October 30, 2026
- Posted by: Harsh Piplani
- Category: IPO
Carver Roboweld IPO Day 3, 30 Oct 2026. Subscribed 0.84x after Day 2: NII 1.97x, Retail 0.65x, QIB 0.00x. Price band Rs 76-80. Lot size 1,600 shares.
Quick Answer
The Carver Roboweld IPO is on its final day of bidding on 30 October 2026. The issue was subscribed 0.84 times at the Day 2 reading on 29 October, with NII at 1.97 times, retail at 0.65 times and QIB at 0.00 times, excluding the anchor and market maker portions. With bidding open until the end of today’s session, the final subscription figure depends on demand in the closing hours.
Carver Roboweld Limited, a Rajkot-based maker of welding consumables, has reached the final day of its IPO subscription window today, 30 October 2026. The Carver Roboweld IPO opened on 28 October 2026 and is a book built SME issue of 35,36,000 equity shares worth about Rs 28.29 crore at the upper band, entirely a fresh issue. The shares are proposed to list on the BSE SME platform.
Big NII bidders led Day 2 at 3.46 times, small NII bidders were at 1.06 times and retail rose to 0.65 times from 0.21 times a day earlier. Bids for 21,26,400 shares had arrived against 25,39,200 shares offered after the anchor portion, from 340 applications, and QIB bids had still not appeared.
Click Here – Get Free Investment Predictions
Carver Roboweld IPO Details
The table below sets out the key parameters of the Carver Roboweld IPO.
| Open Date | 28 October 2026 |
| Close Date | 30 October 2026 |
| Face Value | Rs 10 per share |
| Price Band | Rs 76 to Rs 80 per share |
| Lot Size | 1,600 shares (minimum application 3,200 shares) |
| Issue Size | Rs 28.29 crore (entirely fresh issue of 35,36,000 shares) |
| Issue Type | Book Built Issue, SME |
| Listing At | BSE SME |
| Allotment Date | 2 November 2026 |
| Listing Date | 4 November 2026 |
Carver Roboweld IPO Subscription Status Day 3
The table below tracks how the issue has moved through its bidding window, from the Day 1 close through to the Day 2 reading on Thursday, 29 October.
| Session | Overall | QIB | NII | Retail |
|---|---|---|---|---|
| Day 1 close (28 Oct) | 0.25x | 0.00x | 0.69x | 0.21x |
| Day 2 close (29 Oct) | 0.84x | 0.00x | 1.97x | 0.65x |
| Day 3, closing day so far (30 Oct) | Updating through the session | |||
Figures are the exchange reading at about 5 PM on 29 October and exclude the anchor and market maker portions, so confirm final numbers on BSE as bidding closes today. In SME issues, bids can arrive at any point through the final session.
Track Subscription Status for the issue on the Univest Screener
How to Apply for the Carver Roboweld IPO
- Open a Demat and trading account with a SEBI-registered broker such as Univest if you do not already have one.
- Select the issue on your broker app or net banking platform and enter your bid quantity and price within the Rs 76 to Rs 80 band, with a minimum application of 3,200 shares.
- Submit the application through the UPI-based ASBA method so the bid amount is blocked rather than debited immediately.
- Approve the UPI mandate on your phone before the daily cut off time, since the issue closes for good after this session.
Download the Univest iOS App or Univest Android App to apply for the issue before it closes today.
Grey market premium (GMP) is an unofficial, unregulated indicator for the issue that is not endorsed by SEBI, NSE, or BSE. Investors looking for indicative GMP data can go through other relevant sources, though such figures should never be the sole basis for an investment decision.
Conclusion
The issue enters its final day at 0.84 times, with NII at 1.97 times but retail at 0.65 times and no QIB bids so far. Investors considering the issue should weigh the Rs 2,56,000 minimum application, the dependence on a few customers and on the forging industry, the negative operating cash flow in FY26 and SME liquidity, and read the RHP on bseindia.com before applying after independent due diligence.
Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).
FAQs
What is the Carver Roboweld IPO subscription status on Day 3?
Ans. On the closing day, 30 October 2026, the issue carries forward a Day 2 reading of 0.84 times overall, with NII at 1.97 times, retail at 0.65 times and QIB at 0.00 times, and figures are updating through today’s final session.
When does the Carver Roboweld IPO close?
Ans. The issue closes for subscription today, 30 October 2026, having opened on 28 October 2026.
What is the Carver Roboweld IPO price band and lot size?
Ans. The issue price band is Rs 76 to Rs 80 per share, with a lot size of 1,600 shares. The minimum application is 2 lots, or 3,200 shares, which is about Rs 2,56,000 at the upper price band.
Is the Carver Roboweld IPO fully subscribed?
Ans. Not yet. The issue was subscribed 0.84 times at the Day 2 reading on 29 October, with NII at 1.97 times, retail at 0.65 times and QIB at 0.00 times, excluding the anchor and market maker portions.
What is the Carver Roboweld IPO GMP?
Ans. Grey market premium (GMP) is an unofficial, unregulated indicator for the issue that is not endorsed by SEBI, NSE, or BSE. Investors looking for indicative GMP data can go through other relevant sources, though such figures should never be the sole basis for an investment decision.
How do I apply for the Carver Roboweld IPO?
Ans. You can apply for the issue through your SEBI-registered broker or UPI-enabled banking app using the ASBA method, enter your bid quantity and price within the Rs 76 to Rs 80 band, with a minimum application of 3,200 shares, then approving the UPI mandate before the daily cut off.
When will the Carver Roboweld IPO be allotted and listed?
Ans. The issue allotment is expected to be finalised on 2 November 2026, with listing on the BSE SME platform tentatively scheduled for 4 November 2026.
What does Carver Roboweld Limited do?
Ans. Carver Roboweld Limited manufactures welding consumables such as metal-cored wires, welding rods and gauging electrodes, and provides forging die regeneration and welding robot rental services to customers in the forging industry.
