Univest
Univest
  • Markets

Rapicut Carbides Ltd. (RAPICUT) Share Price Within 2% of All-Time High

  • August 18, 2026
  • Posted by: Harsh Piplani
  • Category: News
No Comments
Rapicut Carbides Ltd. Share Price

Rapicut Carbides Ltd. Share Price is Rs 328.20, placing the stock within 2% of its all-time high. The company’s market capitalisation stands at Rs 176.28 crore.

Rapicut Carbides Ltd. Share Price is at Rs 328.20, and the stock is trading within 2% of its all-time high, according to the Univest screener at 18 August 2026 at 10:12:58 AM IST. With a market capitalisation of Rs 176.28 crore, Rapicut Carbides Ltd. Share Price is now close enough to its historic peak to draw attention from investors tracking momentum, valuation and sector positioning together.

The significance of this event is straightforward. A stock trading near its all-time high often reflects sustained market interest, and it also becomes a level that market participants watch closely for signs of continuation or hesitation. In this case, the supplied data confirms the price event itself, but it does not establish a company-specific catalyst behind the move. That makes the quality of the available numbers especially important when assessing why Rapicut Carbides Ltd. Share Price is being watched.

Univest data also shows that the stock’s valuation and profitability profile is mixed. Rapicut Carbides Ltd. Share Price trades on a P/E ratio of 15.14 and a P/B ratio of 5.9, while return ratios stand at ROE of -3.4 and ROCE of -4.33. Those figures create a more nuanced picture than price strength alone, which is why investors following Rapicut Carbides Ltd. Share Price Today may also look at industry benchmarks and peer comparisons before drawing conclusions.

Rapicut Carbides Ltd. Share Price Today: Within 2% of All-Time High

Rapicut Carbides Ltd. Share Price Today stands at Rs 328.20, which is the exact last traded price captured when the Univest screener qualified the stock for this event. The key confirmed point is that Rapicut Carbides Ltd. Share Price is within 2% of its all-time high. That places the stock near record levels without confirming a fresh high, a breach of the historic peak or any breakout beyond it.

For market participants, this kind of setup matters because stocks trading close to their historic peaks tend to attract additional scrutiny. Some investors look at such levels for evidence of underlying demand, while others compare the move against valuation and profitability to judge whether the price position is supported by financial quality. In both cases, Rapicut Carbides Ltd. Share Price becomes relevant not just because of where it is, but because of what that level may signal about market interest in the company within the Capital Goods space.

The supplied event data confirms the proximity, the timing and the price level, but it does not identify a company-specific reason for why the stock is near its ATH. That means the more useful next step is to move from the headline price event to the balance between valuation, return ratios and the broader Engineering – Industrial Equipments benchmark. Univest investors tracking Rapicut Carbides Ltd. Share Price often focus on exactly that transition from price action to business context.

Rapicut Carbides Ltd. (RAPICUT) Share Price Today: Price Action Analysis

Metric Value
LTP at 2% Qualification Rs 328.2
Market Capitalisation Rs 176.28 crore
All-Time High Position Trading within 2% of its all-time high

Rapicut Carbides Ltd. (RAPICUT) traded at Rs 328.2. Reported volume was 961.

Rapicut Carbides Ltd. (RAPICUT) Fundamental Analysis

Metric Value
Market Capitalisation Rs 176.28 crore
P/E Ratio 15.14x
P/B Ratio 5.9x
ROE -3.4%
ROCE -4.33%
EPS Rs 21.67
Book Value Per Share Rs 55.65
Dividend Yield 0%

Rapicut Carbides Ltd. was valued at a P/E ratio of 15.14x, a P/B ratio of 5.9x. These multiples provide valuation context, but they should not be labelled expensive or inexpensive without a comparable peer or sector benchmark.

Profitability and capital efficiency were represented by ROE of -3.4% and ROCE of -4.33%. ROE relates profit to shareholder equity, while ROCE measures returns generated on the capital employed in the business.

Per-share and shareholder-return metrics included EPS of Rs 21.67, book value per share of Rs 55.65, dividend yield of 0%. Dividend yield is a current or historical ratio and does not guarantee future distributions.

Rapicut Carbides Ltd. Share Price currently values the company at a market capitalisation of Rs 176.28 crore, placing it in the smaller end of the listed Capital Goods universe. On valuation, the stock trades at a P/E ratio of 15.14. That indicates investors are paying 15.14 times earnings based on the supplied figure, which is a moderate multiple when viewed in isolation. The P/B ratio of 5.9 shows that Rapicut Carbides Ltd. Share Price is trading at 5.9 times book value, a figure that deserves attention when measured against return ratios.

The profitability readings are weak in the current data snapshot. ROE stands at -3.4, while ROCE is -4.33. Negative return ratios suggest the present relationship between capital employed, shareholder equity and reported returns is not strong. That matters because valuation multiples can look reasonable on one metric and stretched on another. In this case, Rapicut Carbides Ltd. Share Price combines a positive earnings metric with weaker return metrics, creating a mixed fundamental profile rather than a uniformly strong one.

EPS is Rs 21.67, which indicates the earnings attributable to each share on the supplied basis. Book value per share is Rs 55.65, showing the accounting net worth behind each share. Dividend yield is 0, which means the current data does not point to a cash yield from the stock at the present market price. Taken together, these figures show why Rapicut Carbides Ltd. Share Price is drawing attention: the market price is near its historic peak, but investors still need to weigh that against profitability efficiency and balance-sheet valuation. From here, the clearest test is how these numbers compare with the wider industry and closely matched listed peers tracked by Univest.

Sector and Industry Context

Metric Value
Sector Capital Goods
Industry Engineering – Industrial Equipments
Benchmark Scope same industry
Company P/E Ratio 15.14x
Benchmark Median P/E 20.15x
Benchmark Average P/E 56.87x
Benchmark P/E Range 0x to 3,575.23x
Company P/B Ratio 5.9x
Benchmark Median P/B 2.39x
Company ROE -3.4%
Benchmark Median ROE 9.97%
Company ROCE -4.33%
Benchmark Median ROCE 12.37%
Company Market Capitalisation Rs 176.28 crore
Benchmark Median Market Cap Rs 203.53 crore

Rapicut Carbides Ltd. (RAPICUT) is classified under sector: Capital Goods and industry: Engineering – Industrial Equipments.

Rapicut Carbides Ltd. (RAPICUT) has a P/E ratio of 15.14x, which is below the benchmark median of 20.15x, a difference of -24.86%. P/E is a valuation multiple and is not, by itself, a buy or sell signal.

Rapicut Carbides Ltd. (RAPICUT) has a ROE of -3.4%, which is below the benchmark median of 9.97%, a difference of -134.1%. Rapicut Carbides Ltd. (RAPICUT) has a ROCE of -4.33%, which is below the benchmark median of 12.37%, a difference of -135%.

Track today’s top gainers through the Univest top gainers screener. The peer table below provides the company-level comparison.

Rapicut Carbides Ltd. Share Price sits in the Capital Goods sector and the Engineering – Industrial Equipments industry. The benchmark used here covers the same industry, with 137 companies in scope, while the broader sector count is 277 companies. That gives investors a meaningful comparison set for judging whether Rapicut Carbides Ltd. Share Price is expensive, inexpensive or simply mixed relative to its operating universe.

On earnings valuation, the company’s P/E ratio of 15.14 is below the same-industry median of 20.15 and well below the average of 56.87. The benchmark range is wide, from 0 to 3575.23, which shows how dispersed valuations are across the industry. By contrast, the company’s P/B ratio of 5.9 is above the median of 2.39, though still below the average of 10.38. The industry P/B range runs from -87.67 to 1040.36, again showing a broad spread.

Profitability is where Rapicut Carbides Ltd. Share Price looks weaker against the benchmark. ROE of -3.4 is below the industry median of 9.97 and the average of 7.88. ROCE of -4.33 is also below the median of 12.37 and average of 11.33. In size terms, the company’s market capitalisation of Rs 176.28 crore is below the industry median of Rs 203.53 crore and well below the average of Rs 487.49 crore, within a benchmark range of Rs 1.29 crore to Rs 3,122.41 crore. Univest data therefore suggests a stock near its ATH with a lower-than-median P/E, a higher-than-median P/B and profitability that trails the industry benchmark.

Peer Comparison

Company Symbol Market Cap (Cr) P/E P/B ROE (%) ROCE (%)
Global Pet Industries Ltd. GLOBALPET-ST 181.7 34.29 3.29 27.55 37.95
Gallard Steel Ltd. GALLARD 184.01 20.12 3.12 4.63 5.77
KPT Industries Ltd. KPT 161.16 14.12 2.04 14.97 15.48
Loyal Equipments Ltd. LOYAL 160.88 23.24 2.85 4.22 8.09
Rappid Valves (India) Ltd. RAPPID-SM 158.87 24.53 3.7 0 24.65

Rapicut Carbides Ltd. (RAPICUT) has a P/E ratio of 15.14x compared with the displayed peer median of 23.24x. This is a relative valuation comparison, not a buy or sell signal. Its ROE of -3.4% compares with a peer median of 4.63% across the companies shown in the table. ROCE stood at -4.33% versus the displayed peer median of 15.48%, providing a capital-efficiency comparison. Rapicut Carbides Ltd. (RAPICUT) has a market capitalisation of Rs 176.28 crore. Among the 5 peers shown, 2 have a larger market capitalisation.

Peer data sharpens that picture further. Rapicut Carbides Ltd. Share Price reflects a market capitalisation of Rs 176.28 crore, which places the company close to Global Pet Industries at Rs 181.70 crore and Gallard Steel at Rs 184.01 crore, and above KPT Industries at Rs 161.16 crore, Loyal Equipments at Rs 160.88 crore and Rappid Valves (India) at Rs 158.87 crore. In size terms, the peer group is therefore relatively comparable.

On valuation, Rapicut Carbides Ltd. Share Price trades at 15.14 times earnings. That is below Global Pet Industries at 34.29, Gallard Steel at 20.12, Loyal Equipments at 23.24 and Rappid Valves (India) at 24.53, while remaining slightly above KPT Industries at 14.12. The P/B ratio of 5.9 is higher than all five peers in this supplied comparison set, where the range runs from 2.04 to 3.70.

Returns are the clear weak point in the peer view. Rapicut Carbides Ltd. Share Price is linked to ROE of -3.4 and ROCE of -4.33, both below the peer readings of Global Pet Industries, Gallard Steel, KPT Industries and Loyal Equipments. Even Rappid Valves (India), with ROE of 0, stands above Rapicut on that measure, and its ROCE of 24.65 is much stronger. That leaves Rapicut Carbides Ltd. Share Price looking relatively undemanding on P/E versus most peers, but less comfortable on P/B and return efficiency.

Why Investors Are Watching Rapicut Carbides Ltd.

Rapicut Carbides Ltd. Share Price is being watched because the stock is trading within 2% of its all-time high while carrying a valuation and profitability mix that is not one-dimensional. When a smaller Capital Goods company approaches historic peak levels, investors often move beyond price alone and compare the stock’s earnings multiple, book valuation, return ratios and peer standing. Univest flags this setup because Rapicut Carbides Ltd. Share Price combines price strength with data points that deserve a closer read rather than a simple momentum label.

  • Rapicut Carbides Ltd. Share Price is at Rs 328.20 and has qualified on Univest as trading within 2% of its all-time high.
  • The company’s market capitalisation is Rs 176.28 crore, close to several listed same-industry peers.
  • P/E at 15.14 is below the same-industry median of 20.15, but P/B at 5.9 is above the median of 2.39.
  • ROE of -3.4 and ROCE of -4.33 are below both industry medians and most listed peers in the supplied comparison set.
  • RSI stands at 83.43, which points to elevated momentum in the current snapshot.

The next checkpoints for investors tracking Rapicut Carbides Ltd. Share Price are whether the stock continues to hold close to record levels and how the market weighs its lower P/E against weaker return ratios and a higher P/B multiple. Sector benchmarking and peer relative performance remain especially relevant because the supplied data confirms the price event, but not a specific corporate trigger.

About Rapicut Carbides Ltd.

Rapicut Carbides Ltd. is classified by Univest within the Capital Goods sector and the Engineering – Industrial Equipments industry. That places the company in a manufacturing-oriented listed space where investors often compare valuation multiples, return ratios and market capitalisation across a wide range of small and mid-sized businesses.

In the current data set, Rapicut Carbides Ltd. Share Price is best understood through that industry lens. The company’s market capitalisation of Rs 176.28 crore puts it near the lower-middle part of the same-industry benchmark, while its valuation and profitability metrics show a profile that differs from several peers. Because the supplied company context is primarily classification-based, the most reliable way to track the business in this article is through its sector placement, relative valuation and listed-market positioning. For investors following Rapicut Carbides Ltd. Stock News, that still provides useful context for understanding why the stock is being discussed as it trades close to historic peak levels.

Track Rapicut Carbides Ltd. Share Price on Univest

Use Rapicut Carbides Ltd. (RAPICUT) live share-price page, Univest top gainers screener, Univest market blogs to review live stock data, top gainers lists and related market analysis.

Investors tracking Rapicut Carbides Ltd. Share Price can use Univest to follow live price movement, technical indicators, valuation ratios, shareholding pattern updates, 52-week levels and broader market insights in one place. As Rapicut Carbides Ltd. Share Price trades near its ATH, the ability to monitor fundamentals, peer positioning and sector benchmarks together becomes more useful than looking at price alone. Univest also helps users compare Rapicut Carbides Ltd. Share Price Today with listed peers in Engineering – Industrial Equipments and review how market-cap scale, P/E, P/B, ROE and ROCE are lining up over time.

Disclaimer: Data and figures in this article are sourced from publicly available information. These may or may not be accurate. Please verify all data with the official NSE (nseindia.com) and BSE (bseindia.com) websites before making any investment decision. Investments in securities are subject to market risk. This content is for educational purposes only and is not investment advice by Univest (SEBI RA INH000013776).

Frequently Asked Questions

What is Rapicut Carbides Ltd. Share Price today?

Ans. Rapicut Carbides Ltd. Share Price today is Rs 328.20, based on the event-time last traded price captured by Univest at 10:12:58 AM IST on 18 August 2026. The company’s market capitalisation at that point stood at Rs 176.28 crore.

Why is Rapicut Carbides Ltd. Share Price in focus today?

Ans. Rapicut Carbides Ltd. Share Price is in focus because the stock is trading within 2% of its all-time high. That places it close to record levels, a zone investors often monitor alongside valuation, profitability and peer comparisons.

Is Rapicut Carbides Ltd. Share Price expensive on P/E?

Ans. Rapicut Carbides Ltd. Share Price trades at a P/E ratio of 15.14. That is below the same-industry median of 20.15 and average of 56.87 across 137 companies, so the earnings multiple looks lower than the benchmark midpoint.

How does Rapicut Carbides Ltd. compare on price-to-book?

Ans. Rapicut Carbides Ltd. has a P/B ratio of 5.9. That is above the same-industry median of 2.39, although below the average of 10.38, indicating the stock carries a richer book-value multiple than the benchmark median.

What do the ROE and ROCE figures show for Rapicut Carbides Ltd.?

Ans. Rapicut Carbides Ltd. reports ROE of -3.4 and ROCE of -4.33 in the supplied data. Both are below the industry medians of 9.97 and 12.37, showing weaker return efficiency than the benchmark snapshot.

What are the EPS, book value and dividend yield of Rapicut Carbides Ltd.?

Ans. The supplied figures show EPS at Rs 21.67, book value per share at Rs 55.65 and dividend yield at 0. These numbers help frame Rapicut Carbides Ltd. Share Price against earnings, net worth and cash payout context.

How does Rapicut Carbides Ltd. compare with listed peers?

Ans. Rapicut Carbides Ltd. has a market capitalisation of Rs 176.28 crore, close to peers such as Global Pet Industries, Gallard Steel and KPT Industries. Its P/E is lower than most peers, but its ROE and ROCE are weaker.

What sector does Rapicut Carbides Ltd. belong to?

Ans. Rapicut Carbides Ltd. belongs to the Capital Goods sector and the Engineering – Industrial Equipments industry. The same-industry benchmark used in this analysis covers 137 companies, while the broader sector count stands at 277.



Author: Harsh Piplani
I am Harsh Piplani, an Assistant Content Manager with over 5 years of experience in crafting impactful, result-driven content. I hold a B.Com (Hons) degree and have worked across diverse industries, including education, fintech, healthcare, jewellery, and more. I specialise in content strategy, SEO, and optimisation, ensuring that every piece I create is not just well-written but also well-ranked. I believe content should do more than fill space so as to drive traffic, build authority, and support business growth. I enjoy turning complex ideas into clear, engaging narratives, and, as I like to say, I know how to spin words like a web to influence, structured, strategic, and impossible to ignore. For me, great content sits at the intersection of creativity and performance.

Leave a Reply Cancel reply