Indian Metals and Ferro Alloys Q1 Results FY27: PAT at Rs 192 Cr for June 2026 Quarter

Indian Metals and Ferro Alloys Q1 results FY27: PAT Rs 192 Cr (+108.12% YoY) | Revenue Rs 960 Cr (+49.71% YoY) | Gross Margin 26.8% | Stock Rs 1,467.3 (down 1.66%)

The Indian Metals and Ferro Alloys Q1 results FY27 show consolidated revenue of Rs 960 Cr for the quarter ended 30 June 2026, +49.71% year on year from Rs 641 Cr in Q1 FY26, as Indian Metals and Ferro Alloys reported its numbers on 4 August 2026. Indian Metals and Ferro Alloys posted pat of Rs 192 Cr for the quarter, against Rs 92 Cr in Q1 FY26, a change of +108.12%. Shares traded around Rs 1,467.3 on the NSE, down 1.66% on the day.

The June 2026 quarter played out against a broadly stable macro backdrop, contained inflation, a supportive monsoon outlook, and resilient domestic consumption, though global uncertainty around tariffs and commodity prices kept sector-level variability elevated. Against that backdrop, the Indian Metals and Ferro Alloys Q1 results FY27 give investors the first hard data point for FY27. This article breaks down what happened at the revenue, gross profit, and net profit line, what the numbers mean for the full year, and what questions investors should be asking before making any portfolio decision.

Click Here – Get Free Investment Predictions

Indian Metals and Ferro Alloys Q1 results FY27 Financial Highlights

All figures are consolidated numbers in Rs Crore as reported by Indian Metals and Ferro Alloys for Q1 FY27 (April to June 2026). The table compares them against the same quarter in FY26.

Indian Metals and Ferro Alloys Q1 results FY27 Performance Analysis

Revenue growth was the headline number for the quarter. Indian Metals and Ferro Alloys reported Rs 960 Cr for June 2026, up +49.71% from Rs 641 Cr in Q1 FY26, a growth rate that comfortably outpaced most peers and points to strong underlying demand, market share gains, or the consolidation of a newly scaled capacity.

Gross profit improved faster than revenue. The gross profit came in at Rs 257 Cr (26.8% margin), up +132.87% year on year from Rs 110 Cr. The positive operating jaws confirm that Indian Metals and Ferro Alloys is converting its topline growth into margin expansion rather than giving it away on costs.

The bottom line was the cleanest positive in the release. Indian Metals and Ferro Alloys posted net profit (PAT) of Rs 192 Cr for the quarter, up +108.12% from Rs 92 Cr in Q1 FY26. The combination of revenue growth and margin resilience is translating into a meaningfully higher earnings figure, the outcome investors were hoping to see.

Check the Univest Screener for Live Data

Indian Metals and Ferro Alloys Q1 results FY27: Key Business Factors

1. Revenue: What Drove the Quarter

Indian Metals and Ferro Alloys reported revenue of Rs 960 Cr against Rs 641 Cr in Q1 FY26, a change of +49.71%. Understanding this revenue figure requires context: in the metals and energy sector, volume growth and realisation per unit are both drivers, and the aggregate revenue number is the product of both. Investors tracking Indian Metals and Ferro Alloys should check the investor presentation or earnings call commentary for the volume-versus-pricing split underlying this quarter’s topline.

2. Gross Profit and Margin Trends

Gross margin improved to 26.8% from 17.2% in Q1 FY26, a gain of 9.6 percentage points. This expansion signals that Indian Metals and Ferro Alloys has either improved its procurement costs, shifted to higher-margin products, or benefited from softer input prices in the metals and energy sector. Margin expansion sustained over multiple quarters is typically a strong driver of earnings upgrades and re-rating.

3. Net Profit and Earnings Quality

Indian Metals and Ferro Alloys posted pat of Rs 192 Cr for the June 2026 quarter, against Rs 92 Cr in Q1 FY26, a change of +108.12%. This bottom line figure is what drives earnings per share and, ultimately, the P/E multiple at which the stock trades. Analysts will now update their FY27 EPS estimates using this Q1 run rate, adjusted for any seasonal factors and guidance management provides on the earnings call.

Indian Metals and Ferro Alloys Q1 results FY27 vs Analyst Expectations

Whether the Indian Metals and Ferro Alloys Q1 results FY27 met, beat, or missed analyst forecasts will determine how quickly institutional investors reposition their holdings.

Analyst estimates for the Indian Metals and Ferro Alloys Q1 results FY27 varied ahead of the announcement. The actual revenue of Rs 960 Cr and PAT of Rs 192 Cr now set the benchmark against which FY27 consensus estimates will be revised. When a company beats on both revenue and profit, the stock typically sees buying in the first post-result session. A miss on both tends to trigger selling and downgrades. A mixed print stays range-bound until the earnings call provides clarity. Investors tracking Indian Metals and Ferro Alloys should check live analyst verdict updates on the Univest Screener alongside the stock price movement to contextualise the post-result market reaction.

Indian Metals and Ferro Alloys Dividend Update

Investors tracking dividend history alongside the Indian Metals and Ferro Alloys Q1 results FY27 should note that payout ratios are typically decided at the annual board meeting.

No specific dividend announcement was confirmed as part of the Indian Metals and Ferro Alloys Q1 results FY27 snapshot. Most companies declare dividends at the annual board meeting rather than with quarterly results. Investors tracking Indian Metals and Ferro Alloys for its dividend yield should check the official NSE or BSE exchange filing, or the Univest Screener, for the latest record date and payout details.

Indian Metals and Ferro Alloys Outlook After Q1 results FY27

The Indian Metals and Ferro Alloys Q1 results FY27 establish the Q1 FY27 baseline for revenue at Rs 960 Cr and PAT at Rs 192 Cr. Whether FY27 ends up as a year of acceleration depends on two variables: whether the growth in revenue sustains through Q2 to Q4, and whether margin trends improve, stabilise, or deteriorate relative to this quarter’s gross profit margin of 26.8% . Management guidance on the earnings call will be the single most important datapoint for updating FY27 forecasts. Investors should also track macroeconomic inputs relevant to the metals and energy sector through the rest of the year.

The Q1 FY27 print gives investors a base to work from, but one quarter is rarely enough to conclude a trend. The key follow-up question for Indian Metals and Ferro Alloys is whether the Q1 performance was driven by seasonal tailwinds or something more durable. Q2 FY27 results, due around October 2026, will be the first test of that. Investors should also watch for any corporate actions, debt announcements, or management changes in the interim.

Should You Buy Indian Metals and Ferro Alloys After the Q1 results FY27?

The question most investors ask after any quarterly result is whether it changes the investment case. The Indian Metals and Ferro Alloys Q1 results FY27 show revenue of Rs 960 Cr, gross profit of Rs 257 Cr, and PAT of Rs 192 Cr. Whether these numbers justify buying, holding, or selling depends on the price the stock is trading at (Rs 1,467.3 at the time of this result), the FY27 consensus earnings estimate, and whether this Q1 run rate is sustainable for the remaining three quarters. Investors should check the P/E, P/B, and EV/EBITDA multiples on the Univest Screener against sector peers before deciding. This article is for educational purposes only and does not constitute investment advice. Please consult a SEBI-registered investment advisor before making any investment decision.

Indian Metals and Ferro Alloys Share Price After the Q1 results FY27

Indian Metals and Ferro Alloys shares traded at Rs 1,467.3 on the NSE, down 1.66% on the day the Indian Metals and Ferro Alloys Q1 results FY27 were in focus. Post-result price moves are often driven by event-driven traders who have built positions ahead of the result and unwind them regardless of outcome. Investors should look past the first-session move and focus on whether the fundamental trend in revenue and earnings has changed. The 52 week high, 52 week low, and technical support levels for Indian Metals and Ferro Alloys are available on the Univest Screener for investors who want to time their entry or exit.

Download the Univest iOS App or Univest Android App to track Indian Metals and Ferro Alloys live share price and upcoming quarterly results.

Key Risks to Track After the Indian Metals and Ferro Alloys Q1 results FY27

Reading the Indian Metals and Ferro Alloys Q1 results FY27 in isolation, without considering these risks, can lead to misaligned expectations about the company’s FY27 trajectory.

Investors should weigh these risks carefully before acting on the Q1 data.

1. Sector and Margin Risk

Indian Metals and Ferro Alloys operates in the metals and energy sector, which is exposed to commodity price cycles, input cost inflation and regulatory changes. A reversal of the trends visible in the Indian Metals and Ferro Alloys Q1 results FY27, particularly on the gross profit margin, could put the full-year FY27 earnings estimate at risk.

2. Single-Quarter vs Trend Risk

A single quarterly result can be distorted by working capital cycles, timing of receivables, or one-off costs and reversals that do not repeat. The Indian Metals and Ferro Alloys Q1 results FY27 should be read alongside Q2 data before drawing firm conclusions.

3. Macro and External Risk

Macro factors including RBI rate decisions, INR/USD movements, input commodity prices, and rural versus urban demand mix can shift the environment in the metals and energy sector faster than company-level actions can compensate for.

Conclusion

The Indian Metals and Ferro Alloys Q1 results FY27 provide the Q1 FY27 baseline for investors. Investors researching the Indian Metals and Ferro Alloys Q1 results FY27 will find the key numbers, revenue, gross profit, and net profit, summarised in the table above and analysed in each section of this article.

The Indian Metals and Ferro Alloys Q1 results FY27 show consolidated revenue of Rs 960 Cr (+49.71% year on year) and PAT of Rs 192 Cr (versus Rs 92 Cr in Q1 FY26). Gross profit came in at Rs 257 Cr at a margin of 26.8%, improving from Rs 110 Cr a year earlier. Revenue growth and a stronger bottom line were the two key themes of the quarter. Investors tracking Indian Metals and Ferro Alloys should use the Indian Metals and Ferro Alloys Q1 results FY27 as the baseline and watch Q2 FY27 results, due around October 2026, as the first confirmation of whether these trends are durable. Always consult a SEBI-registered advisor before acting on any quarterly result.

Frequently Asked Questions on Indian Metals and Ferro Alloys Q1 results FY27

This FAQ section addresses the most common questions investors ask after the Indian Metals and Ferro Alloys Q1 results FY27, including revenue, gross profit, PAT, dividend and the investment outlook.

This FAQ section addresses the most common questions investors ask after the Indian Metals and Ferro Alloys Q1 results FY27, including revenue, PAT, dividend, outlook, and whether the stock is a buy.

What were the Indian Metals and Ferro Alloys Q1 results FY27?

Ans. Indian Metals and Ferro Alloys reported revenue of Rs 960 Cr (+49.71% YoY) and PAT of Rs 192 Cr for Q1 FY27 (quarter ended 30 June 2026), against Rs 92 Cr in Q1 FY26.

What is the PAT in the Indian Metals and Ferro Alloys Q1 results FY27?

Ans. PAT in the Indian Metals and Ferro Alloys Q1 results FY27 stood at Rs 192 Cr, compared with Rs 92 Cr in Q1 FY26, a change of +108.12%.

What was the revenue in the Indian Metals and Ferro Alloys Q1 results FY27?

Ans. Revenue in the Indian Metals and Ferro Alloys Q1 results FY27 was Rs 960 Cr, a change of +49.71% from Rs 641 Cr in Q1 FY26.

What was the gross profit in the Indian Metals and Ferro Alloys Q1 results FY27?

Ans. Gross profit in the Indian Metals and Ferro Alloys Q1 results FY27 was Rs 257 Cr (26.8% margin), compared with Rs 110 Cr in Q1 FY26, a change of +132.87%.

Did Indian Metals and Ferro Alloys declare a dividend with the Q1 results FY27?

Ans. No dividend was confirmed as part of the Indian Metals and Ferro Alloys Q1 results FY27 snapshot. Check the NSE or BSE exchange filing for the latest dividend announcement from Indian Metals and Ferro Alloys.

What is the outlook for Indian Metals and Ferro Alloys after Q1 results FY27?

Ans. Following the Indian Metals and Ferro Alloys Q1 results FY27, analysts will track whether the growth in revenue and improvement in profit continue into Q2 FY27 (September quarter), along with margin trends and management guidance.

Is Indian Metals and Ferro Alloys a good buy after Q1 results FY27?

Ans. The Indian Metals and Ferro Alloys Q1 results FY27 show revenue of Rs 960 Cr and PAT of Rs 192 Cr. Investment decisions should be based on valuation relative to earnings trajectory, not a single quarter. Consult a SEBI-registered advisor before investing.